Changes for page Testing Procedures

Last modified by robert on 2024/12/09 16:08

From version 5.2

edited by robert
on 2024/12/03 09:36

Change comment: There is no comment for this version

To version 7.1

edited by robert
on 2024/12/03 11:49

Change comment: There is no comment for this version

Summary

Page properties

Content

@@ -612,25 +612,25 @@
  Inside the “Vrl (Theoretical)” cell enter the following formula using the corresponding cells.
--[Equation]
++V_{RL}=I_{oc}\times R_L
  Inside the “Rated Power” cell enter the following formula using the corresponding cells.
--[Equation]
++P_{oc}=V_{oc}\times I_{oc}
  Inside the “Load Power” cell enter the following formula using the corresponding cells.
--[Equation]
++P_{RL}=\frac{V_{RL}}{R_L}\times V_{oc}
  Inside the “Power Loss %” cell enter the following formula using the corresponding cells.
--The calculated values that are negative represent power loss, and positive values are power gain. Performing “conditional formatting” on these cells with colour gradient (defined by colour break limits) would yield visually easy to recognise defective panels.
++The calculated values that are negative represent power loss, and positive values are power gain. Performing “conditional formatting” on these cells with colour gradient (defined by colour break limits) would yield visually easy to recognise defective panels.
--[Equation]
++Power\ Loss\ \%=\frac{P_{RL}}{P_{oc}}\times 100-100
  Perform all the calculations for each solar panel ID entered.