Changes for page Testing Procedures

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -21,25 +21,22 @@
21	21
22	22	== Power Test ==
23	23
24		-Install a known working (and charged) battery into the recorder and turn ON the main power switch, verify that the recorder powers ON correctly.
	24	+Install a known working (and charged) battery into the recorder and turn ON the main power switch, verify that the recorder powers ON correctly.
25	25
26		-
27	27	(% class="box infomessage" %)
28	28	(((
29	29	NOTE: Unit powering ON is not instant, there may be a 10 to 15 sec delay.
30	30	)))
31	31
32		-
33	33	Verify the LCD screen turns on and begins clearly displaying the ANU logo and system parameters correctly once the recorder powers up. Look for signs of flickering, blurring or any other visual artefacts.
34	34
35	35	With the recorder powered ON, using a multimeter, test the bias voltage on GPS antenna port; the reading should be 3.3V (outer shell is negative and centre pin is positive).
36	36
37		-Connect “Test Power Plug” into the sensor port and verify the light is turned on, this indicates the power will be correctly delivered to the sensor.
	35	+Connect "Test Power Plug” (//ANU only//) into the sensor port and verify the light is turned on, this indicates the power will be correctly delivered to the sensor.
38	38
39		-
40	40	(% class="box infomessage" %)
41	41	(((
42		-NOTE: The following step, power feature is not present in LPR200, therefore this step cannot be verified for  LPR recorders.
	39	+NOTE: The following step, power feature is not present in LPR200, therefore this step cannot be verified for LPR recorders.
43	43	)))
44	44
45	45	== System Test ==
...	...	@@ -56,7 +56,6 @@
56	56
57	57	In the Menu under “System Information”, verify that the serial number matches what is written on the case.
58	58
59		-
60	60	== Functional Test ==
61	61
62	62	=== Charging ===