Wiki source code of SmartSolo Nodes

Version 42.2 by robert on 2024/03/25 12:59

version	line-number	content
1.1	1	(% class="row" %)
	2	(((
	3	(% class="col-xs-12 col-sm-8" %)
	4	(((
39.1	5	= SmartSolo Node Types and Procedures =
	6
	7	SmartSolo Node Variants:
	8
	9	* SmartSolo IGU 16HR 3C (5 Hz) Short Period Node
	10	* SmartSolo BD3C-5 (5-second) Broad-Band Node
	11
	12	The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
	13
	14	This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
	15
	16	----
	17
17.1	18	= Node Setup =
	19
42.2	20	Short term (~~30 day) battery powered nodes. The default gain should typically be set to 24 db for the Short Period 16HR-3C and 6 db for the Broadband BD3C-5. This gain must be removed when exporting to miniseed.
17.1	21
23.1	22
17.1	23	== Pre-Fieldwork Preparation ==
	24
18.1	25	(% class="box infomessage" %)
17.1	26	(((
18.2	27	(% class="box warningmessage" %)
	28	(((
22.1	29	INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING
	30
42.2	31	Assume ~~1 Tb of storage for both raw and exported data per 50 nodes @ 250 Hz & 30 days
17.1	32	)))
18.2	33	)))
17.1	34
18.2	35	= Installation =
17.1	36
18.2	37	=== 1- Logbook documentation ===
17.1	38
18.2	39	(((
	40	Essential Details: Record the following in a logbook:
	41
	42	* Station name
	43	* Latitude and longitude
	44	* Names of team members present
	45	* Date and local time of installation
	46	* Serial number (SN) of the sensor
	47	* Detailed notes on the site conditions and setup
	48
	49	=== 2- Node Placement ===
17.1	50	)))
	51
42.2	52	Protection: Place nodes inside thick, landfill biodegradable plastic bags for environmental protection and to minimize cleaning.
17.1	53
18.2	54	Site Analysis:
	55
42.2	56	* Take compass measurements away from the sensor as it will affect your measurement.
18.2	57	* Take multiple photographs from various angles to document the site setup thoroughly.
18.3	58	* Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
18.2	59
20.1	60	=== 3- GPS Considerations ===
18.2	61
20.1	62	(% class="wikigeneratedid" %)
42.2	63	The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. These nodes will not start recording without attaining a GPS lock and repeated attempts will excessively drain the battery.
20.1	64
	65	=== 4- Visibility and Location Marking ===
	66
18.2	67	Flag Placement: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
	68
	69	GPS Marking:
	70
	71	* Use a GPS device to mark the instrument's exact location.
	72	* Record this location in both your paper notes and the GPS device.
	73
20.1	74	=== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)5- Charge Time, Pre-Deployment & Post-Deployment(%%) ===
18.3	75
20.1	76	* Charging Duration: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
	77	* Pre-Deployment Charging:
42.2	78	** Although the nodes hold their charge well, it's beneficial to give them a "top up" charge before deployment.
20.1	79
	80	* Operational Duration:
42.2	81	** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle. If they are set to run only overnight, this can be extended to 60 days.
20.1	82
	83	* Post-Retrieval Charging:
42.2	84	** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) unless they are to be immediately re-deployed.
20.1	85	* Storage and Shipping Charge Level:
	86	** Maintain a battery charge level of around 50-60% for both storage and shipping purposes.
	87	** This charge level is recommended to prevent battery damage and is safe for transportation.
42.2	88	Nodes should not be stored fully charged, and it they should especially not be stored with 0 charge.**
20.1	89
	90	=== ===
	91
42.2	92	(((
20.1	93	=== 6- Data Sharing and Metadata Creation ===
28.1	94	)))
20.1	95
18.3	96	GPS Data:
	97
42.2	98	* Download the GPS file to a laptop. (???)
18.3	99	* Share this file on a drive accessible to all team members for uniform understanding of node locations.
	100
	101	Photo Sharing:
	102
	103	* Upload site photos to a shared platform (OneDrive, Dropbox, etc.).
	104	* Integrating photos into Google Maps or Google Earth can be particularly beneficial for easy location referencing.
	105
	106	Metadata File:
	107
42.2	108	* Create and organize metadata via the ANU metadata standard (~~add example)
18.3	109
20.1	110	=== 7- Additional Best Practices ===
18.3	111
	112	* Environmental Responsibility: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.
	113	* Training and Familiarisation: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.
	114
19.2	115	* (((
	116	==== Keeping the Instruments Clean ====
	117	)))
	118	* (((
	119	Use a (landfill, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
	120	)))
	121
24.2	122	----
18.3	123
24.1	124	=== Seismic Station Demobilization and Documentation ===
	125
	126	1. (((
	127	Preparation for Demobilization:
	128
	129	* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
	130	)))
	131	1. (((
	132	Locating the instrument:
	133
	134	* Use the downloaded GPS file to accurately locate the node for demobilization.
	135	* Import this KMZ file onto your phone for easy reference and location tracking.
	136	* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
	137	)))
	138	1. (((
	139	Labeling Instruments for Demobilization:
	140
	141	* Write the station name and the instrument’s serial number on a label.
	142	* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
	143	* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
	144	)))
	145	1. (((
	146	Photographing the Setup Node:
	147
	148	* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
	149	* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
	150	)))
	151	1. (((
	152	Logging Demobilization Details:
	153
	154	* Use the field logbook to note the time of demobilization, serial numbers, and station name.
	155	* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
	156	)))
	157	1. (((
	158	Final Checks and Equipment Removal:
	159
	160	* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
	161	* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
39.1	162
	163
24.1	164	)))
	165
40.1	166	[[image:1706153556166-231.jpeg\|\|data-xwiki-image-style-alignment="center" height="345" width="460"]]
37.2	167
24.2	168	----
24.1	169
24.2	170	=== Charging Procedure for Seismic Nodes ===
24.1	171
24.2	172	1. (((
	173	Preparation for Charging:
24.1	174
24.2	175	* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
42.2	176
	177
24.2	178	)))
	179	1. (((
	180	Disassembling the Node:
24.1	181
42.2	182	* For the IGU-16HR, remove the battery (bottom half) from the sensor. This is done by unscrewing the spikes counter-clockwise.
	183
	184
24.2	185	)))
	186	1. (((
	187	Setting Nodes in the Charging Box:
24.1	188
42.2	189	* Place 1-16 IGU-16HR battery components upside-down into the charger, assuring they are oriented properly.
	190
	191
24.2	192	)))
	193	1. (((
	194	Monitoring the Charging Process:
24.1	195
42.2	196	* Once the nodes are set in the charging box and the charging process begins, lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
	197	* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged. For storage, the goal is to charge them to ORANGE.
	198
	199
24.2	200	)))
	201	1. (((
	202	Updating Charge Status:
24.1	203
34.2	204	* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
24.2	205	* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
	206	)))
24.1	207
39.1	208	[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png\|\|data-xwiki-image-style-alignment="center" height="299" width="530"]]
36.2	209
	210
37.2	211
	212
39.1	213	[[image:1706153354750-415.png\|\|data-xwiki-image-style-alignment="center" height="317" width="562"]]
37.2	214
24.2	215	----
24.1	216
24.2	217	=== Downloading and Converting Seismic Data to MiniSeed Format ===
24.1	218
24.2	219	==== Node Registration and Software Setup ====
24.1	220
24.2	221	1. (((
	222	Registering Nodes in the System:
24.1	223
24.2	224	* To begin, register the nodes in the system so the software can recognize them.
	225	* Navigate to the installation folder of “SmartSoloApps SoloLite”.
	226	* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
	227	* To avoid double registration, replace the file each time you register a new node.
	228	)))
	229	1. (((
	230	Creating a New Project in SoloLite:
24.1	231
24.2	232	* Open the “SoloLite” software.
	233	* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
	234	* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
	235	)))
	236
	237	==== Data Downloading Process ====
	238
	239	1. (((
	240	Initiating Data Download:
	241
	242	* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
	243	* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
	244	* Select all nodes and right-click to “force download”. This starts the download process.
	245	* Completed downloads will appear as new folders in the Downloaded Data panel.
	246	)))
	247	1. (((
	248	Exporting Data in Readable Format:
	249
	250	* Go to the “Tool” menu and select “export seismic data”.
	251	* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
	252	* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
29.1	253	* (% class="box warningmessage" %)
	254	(((
30.1	255	* Ensure to export data as "COUNTS", not "mV".
24.2	256
42.1	257	* Set "Remove Gain" to the same decibel gain as during programming (by default ANU sets this to 24db (a factor of 15.848932).
27.1	258	)))
	259	)))
24.4	260
24.2	261	==== Handling Nodes During Download ====
	262
	263	1. (((
	264	Monitoring Download Indicators:
	265
	266	* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
	267	* Disconnect nodes properly before unplugging anything.
	268	* Be cautious: if the laptop enters sleep mode, the download will pause.
	269	)))
	270	1. (((
35.1	271	//Investment in Storage Hardware~://
24.2	272
28.1	273	* (% class="box warningmessage" %)
	274	(((
31.2	275	* Use fast external hard drives to avoid limitations in data harvesting.
	276
	277	* Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.
24.2	278	)))
28.1	279	)))
24.2	280	1. (((
	281	Metadata and Time Settings:
	282
	283	* Ensure all metadata is saved with the file.
	284	* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
	285	)))
	286	1. (((
	287	Finalizing the Download:
	288
34.1	289	* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
36.1	290
	291
24.2	292	)))
	293
39.1	294	[[image:1706153266647-145.png\|\|data-xwiki-image-style-alignment="center" height="340" width="603"]]
36.2	295
	296
	297
39.1	298	[[Caption>>image:1705195543887-977.png\|\|data-xwiki-image-style-alignment="center" height="534" width="632"]]
36.2	299
	300
	301
	302
39.1	303	[[Caption>>image:1705195543890-537.png\|\|data-xwiki-image-style-alignment="center" height="397" width="665"]]
36.2	304
37.1	305
36.2	306
39.1	307	[[Caption>>image:1705195543891-334.png\|\|data-xwiki-image-style-alignment="center" height="379" width="650"]]
	308
	309
	310
	311	[[image:1705195543898-365.png\|\|data-xwiki-image-style-alignment="center" height="467" width="674"]]
	312
36.1	313	----
	314
	315	=== Cleaning ===
	316
	317	Procedure for Seismic Nodes:
	318
	319	* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
	320
	321	= =
8.3	322	)))
	323
1.1	324	(% class="col-xs-12 col-sm-4" %)
	325	(((
10.1	326	(% class="box" %)
	327	(((
	328	Contents
1.1	329
10.1	330	(% class="wikitoc" %)
	331	* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]
	332	** [[Sub-paragraph>>path:#HSub-paragraph]]
	333	** [[ >>path:#H]]
	334	* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]
	335	** [[GPS Considerations>>path:#HGPSConsiderations]]
	336	* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]
	337	* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]
	338	* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]
	339	** [[Install>>path:#HInstall]]
	340	** [[Removing/Demob>>path:#HRemoving2FDemob]]
	341	** [[Charging>>path:#HCharging]]
	342	** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]
	343	** [[Converting data>>path:#HConvertingdata]]
	344	** [[Cleaning>>path:#HCleaning]]
	345	)))
1.1	346
8.6	347
11.1	348	(% class="box" %)
10.1	349	(((
11.1	350	= SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =
12.1	351
15.1	352	[[image:Smartsolo IGU BD3C 5 (2).jpg]]
	353
16.1	354	[[image:smartsolo.jpg]]
	355
13.2	356	\|(% style="width:189px" %)Frequency Band\|(% style="width:221px" %)5 Seconds to 150Hz
	357	\|(% style="width:189px" %)Sensitivity\|(% style="width:221px" %)200 V/m/s
	358	\|(% style="width:189px" %)Size (without spike)\|(% style="width:221px" %)158 x160mm
	359	\|(% style="width:189px" %)Weight\|(% style="width:221px" %)2.8 kg
	360	\|(% style="width:189px" %)Data Storage\|(% style="width:221px" %)64 Gb
	361	\|(% style="width:189px" %)Battery\|(% style="width:221px" %)Li_etc XXAh
12.1	362	)))
11.1	363
12.1	364	(% class="box" %)
	365	(((
	366	= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
11.1	367
16.1	368	[[image:smartsolo node.jpg]]
	369
	370	[[image:smartsolo node 2.jpg]]
	371
13.2	372	\|(% style="width:187px" %)Frequency Band\|(% style="width:224px" %)5 Hz to 1652Hz
	373	\|(% style="width:187px" %)Sensitivity\|(% style="width:224px" %)67.7 V/m/s
	374	\|(% style="width:187px" %)Size (with spike)\|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
42.2	375	\|(% style="width:187px" %)Weight\|(% style="width:224px" %)2.4 kg
13.2	376	\|(% style="width:187px" %)Data Storage\|(% style="width:224px" %)64 Gb
42.2	377	\|(% style="width:187px" %)Battery\|(% style="width:224px" %)Lithium ion XXAh
10.1	378	)))
4.1	379
9.2	380
1.1	381	)))
	382	)))

Wiki source code of SmartSolo Nodes

Applications

Navigation