Wiki source code of SmartSolo Nodes

Version 40.1 by Sima Mousavi on 2024/01/25 14:53

version	line-number	content
1.1	1	(% class="row" %)
	2	(((
	3	(% class="col-xs-12 col-sm-8" %)
	4	(((
39.1	5	= SmartSolo Node Types and Procedures =
	6
	7	SmartSolo Node Variants:
	8
	9	* SmartSolo IGU 16HR 3C (5 Hz) Short Period Node
	10	* SmartSolo BD3C-5 (5-second) Broad-Band Node
	11
	12	The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
	13
	14	This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
	15
	16	----
	17
17.1	18	= Node Setup =
	19
23.1	20	Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
17.1	21
23.1	22
	23	~~*this needs to be reformatted
	24
17.1	25	== Pre-Fieldwork Preparation ==
	26
18.1	27	(% class="box infomessage" %)
17.1	28	(((
18.2	29	(% class="box warningmessage" %)
	30	(((
22.1	31	INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING
	32
	33	Plan on 1 Tb to store ALL data for 50 nodes @ 250 Hz and a single ~~30 day occupation
17.1	34	)))
18.2	35	)))
17.1	36
18.2	37	= Installation =
17.1	38
18.2	39	=== 1- Logbook documentation ===
17.1	40
18.2	41	(((
	42	Essential Details: Record the following in a logbook:
	43
	44	* Station name
	45	* Latitude and longitude
	46	* Names of team members present
	47	* Date and local time of installation
	48	* Serial number (SN) of the sensor
	49	* Detailed notes on the site conditions and setup
	50
	51	=== 2- Node Placement ===
17.1	52	)))
	53
18.2	54	Protection: Place nodes inside thick, landfill biodegradable plastic bags for environmental protection.
17.1	55
18.2	56	Site Analysis:
	57
	58	* Conduct compass measurements away from the node and metallic structures, adjusting for inclination angle.
	59	* Take multiple photographs from various angles to document the site setup thoroughly.
18.3	60	* Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
18.2	61
20.1	62	=== 3- GPS Considerations ===
18.2	63
20.1	64	(% class="wikigeneratedid" %)
	65	The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
	66
	67	=== 4- Visibility and Location Marking ===
	68
18.2	69	Flag Placement: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
	70
	71	GPS Marking:
	72
	73	* Use a GPS device to mark the instrument's exact location.
	74	* Record this location in both your paper notes and the GPS device.
	75
20.1	76	=== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)5- Charge Time, Pre-Deployment & Post-Deployment(%%) ===
18.3	77
20.1	78	* Charging Duration: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
	79	* Pre-Deployment Charging:
	80	** Although the nodes hold their charge well, it's beneficial to give them a "top up" charge right before deployment.
	81
	82	* Operational Duration:
	83	** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle.
	84
	85	* Post-Retrieval Charging:
	86	** Do not store the instruments with completely drained batteries.
	87	** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) for optimal battery health.
	88
	89	* Storage and Shipping Charge Level:
	90	** Maintain a battery charge level of around 50-60% for both storage and shipping purposes.
	91	** This charge level is recommended to prevent battery damage and is safe for transportation.
	92
	93	=== ===
	94
28.1	95	* (((
20.1	96	=== 6- Data Sharing and Metadata Creation ===
28.1	97	)))
20.1	98
18.3	99	GPS Data:
	100
	101	* Download the GPS file to a laptop.
	102	* Share this file on a drive accessible to all team members for uniform understanding of node locations.
	103
	104	Photo Sharing:
	105
	106	* Upload site photos to a shared platform (OneDrive, Dropbox, etc.).
	107	* Integrating photos into Google Maps or Google Earth can be particularly beneficial for easy location referencing.
	108
	109	Metadata File:
	110
	111	* Create a metadata XML file for each node, which is essential for data organisation and future reference.
	112
20.1	113	=== 7- Additional Best Practices ===
18.3	114
	115	* Environmental Responsibility: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.
	116	* Training and Familiarisation: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.
	117
19.2	118	* (((
	119	==== Keeping the Instruments Clean ====
	120	)))
	121	* (((
	122	Use a (landfill, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
	123	)))
	124
24.2	125	----
18.3	126
24.1	127	=== Seismic Station Demobilization and Documentation ===
	128
	129	1. (((
	130	Preparation for Demobilization:
	131
	132	* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
	133	)))
	134	1. (((
	135	Locating the instrument:
	136
	137	* Use the downloaded GPS file to accurately locate the node for demobilization.
	138	* Import this KMZ file onto your phone for easy reference and location tracking.
	139	* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
	140	)))
	141	1. (((
	142	Labeling Instruments for Demobilization:
	143
	144	* Write the station name and the instrument’s serial number on a label.
	145	* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
	146	* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
	147	)))
	148	1. (((
	149	Photographing the Setup Node:
	150
	151	* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
	152	* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
	153	)))
	154	1. (((
	155	Logging Demobilization Details:
	156
	157	* Use the field logbook to note the time of demobilization, serial numbers, and station name.
	158	* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
	159	)))
	160	1. (((
	161	Final Checks and Equipment Removal:
	162
	163	* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
	164	* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
39.1	165
	166
24.1	167	)))
	168
40.1	169	[[image:1706153556166-231.jpeg\|\|data-xwiki-image-style-alignment="center" height="345" width="460"]]
37.2	170
24.2	171	----
24.1	172
24.2	173	=== Charging Procedure for Seismic Nodes ===
24.1	174
24.2	175	1. (((
	176	Preparation for Charging:
24.1	177
24.2	178	* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
	179	)))
	180	1. (((
	181	Disassembling the Node:
24.1	182
24.2	183	* Carefully remove the battery and the spike from the sensor. This is typically done by twisting the spike part of the instrument to release these components.
	184	)))
	185	1. (((
	186	Setting Nodes in the Charging Box:
24.1	187
24.2	188	* Place up to 16 nodes into the charging box, arranging them with the spikes pointing upwards. This configuration is essential for proper connection and efficient charging.
	189	)))
	190	1. (((
	191	Monitoring the Charging Process:
24.1	192
24.2	193	* Once the nodes are set in the charging box and the charging process begins, red lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
	194	* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged.
	195	)))
	196	1. (((
	197	Updating Charge Status:
24.1	198
34.2	199	* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
24.2	200	* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
	201	)))
24.1	202
39.1	203	[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png\|\|data-xwiki-image-style-alignment="center" height="299" width="530"]]
36.2	204
	205
37.2	206
	207
39.1	208	[[image:1706153354750-415.png\|\|data-xwiki-image-style-alignment="center" height="317" width="562"]]
37.2	209
24.2	210	----
24.1	211
24.2	212	=== Downloading and Converting Seismic Data to MiniSeed Format ===
24.1	213
24.2	214	==== Node Registration and Software Setup ====
24.1	215
24.2	216	1. (((
	217	Registering Nodes in the System:
24.1	218
24.2	219	* To begin, register the nodes in the system so the software can recognize them.
	220	* Navigate to the installation folder of “SmartSoloApps SoloLite”.
	221	* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
	222	* To avoid double registration, replace the file each time you register a new node.
	223	)))
	224	1. (((
	225	Creating a New Project in SoloLite:
24.1	226
24.2	227	* Open the “SoloLite” software.
	228	* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
	229	* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
	230	)))
	231
	232	==== Data Downloading Process ====
	233
	234	1. (((
	235	Initiating Data Download:
	236
	237	* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
	238	* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
	239	* Select all nodes and right-click to “force download”. This starts the download process.
	240	* Completed downloads will appear as new folders in the Downloaded Data panel.
	241	)))
	242	1. (((
	243	Exporting Data in Readable Format:
	244
	245	* Go to the “Tool” menu and select “export seismic data”.
	246	* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
	247	* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
29.1	248	* (% class="box warningmessage" %)
	249	(((
30.1	250	* Ensure to export data as "COUNTS", not "mV".
24.2	251
30.1	252	* Set "Remove Gain" to the same decibel gain as during programming (ANU usually sets this to 18 db, but double-check).
27.1	253	)))
	254	)))
24.4	255
24.2	256	==== Handling Nodes During Download ====
	257
	258	1. (((
	259	Monitoring Download Indicators:
	260
	261	* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
	262	* Disconnect nodes properly before unplugging anything.
	263	* Be cautious: if the laptop enters sleep mode, the download will pause.
	264	)))
	265	1. (((
35.1	266	//Investment in Storage Hardware~://
24.2	267
28.1	268	* (% class="box warningmessage" %)
	269	(((
31.2	270	* Use fast external hard drives to avoid limitations in data harvesting.
	271
	272	* Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.
24.2	273	)))
28.1	274	)))
24.2	275	1. (((
	276	Metadata and Time Settings:
	277
	278	* Ensure all metadata is saved with the file.
	279	* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
	280	)))
	281	1. (((
	282	Finalizing the Download:
	283
34.1	284	* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
36.1	285
	286
24.2	287	)))
	288
39.1	289	[[image:1706153266647-145.png\|\|data-xwiki-image-style-alignment="center" height="340" width="603"]]
36.2	290
	291
	292
39.1	293	[[Caption>>image:1705195543887-977.png\|\|data-xwiki-image-style-alignment="center" height="534" width="632"]]
36.2	294
	295
	296
	297
39.1	298	[[Caption>>image:1705195543890-537.png\|\|data-xwiki-image-style-alignment="center" height="397" width="665"]]
36.2	299
37.1	300
36.2	301
39.1	302	[[Caption>>image:1705195543891-334.png\|\|data-xwiki-image-style-alignment="center" height="379" width="650"]]
	303
	304
	305
	306	[[image:1705195543898-365.png\|\|data-xwiki-image-style-alignment="center" height="467" width="674"]]
	307
36.1	308	----
	309
	310	=== Cleaning ===
	311
	312	Procedure for Seismic Nodes:
	313
	314	* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
	315
	316	= =
	317
40.1	318	= =
	319
	320	= =
	321
	322	= =
	323
	324	= =
	325
	326	= =
	327
	328	= =
	329
	330	= ~=~=~=~=~=~=~=~=~=~=Done! Should be deleted from here~=~=~=~=~=~=~=~=~=~=~= =
	331
	332	= =
	333
	334	= =
	335
	336	= =
	337
	338	= =
	339
	340	= =
	341
3.2	342	= SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
1.1	343
	344	blahblah
	345
	346	== Sub-paragraph ==
	347
	348
35.1	349	== [[image:1705196270090-364.png]] ==
1.1	350
	351
6.3	352	= Smart Solo BD3C-5 (5 second) Broad-Band Node =
1.1	353
6.3	354	Lorem
1.1	355
	356
3.2	357	== GPS Considerations ==
1.1	358
3.2	359	The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
1.1	360
8.2	361	= Keeping the Instruments Clean =
1.1	362
10.1	363	Use a (landfill, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
6.3	364
	365
	366	= Charge Time, Instrument Life, and Charge During Storage & Shipping =
	367
	368	Both nodes take about 6-8 hours to charge from flat and hold their charge reasonably well, however you may benefit from a "top up" charge immediately prior to deploy. The instruments should last around 30 days per cycle (recording at 250hz) with GPS on cycle on and bluetooth disabled.
	369
	370	Upon retrieval, the instruments should not be stored flat as this will damage the batteries. It is recommended to charge them back up "to orange" such that they are charged around ~~50-60%. This is also acceptable for shipping.
7.1	371
	372
	373	= Best Practices and Guide =
	374
7.2	375	== Install ==
7.1	376
	377	Logbook is required (used again for pick up & metadata creation)
	378
	379	- station name
	380
	381	- lat / long
	382
	383	- team members
	384
	385	- date and local time
	386
	387	- SN of sensor
	388
	389	- notes on site
	390
	391	Place nodes in thick (“landfill biodegradable”) plastic bags in the hole
	392
	393	Take compass measurement away from node and fences [make sure to adjust inclination angle]
	394
	395	Take many photos from the site from different angles
	396
	397	Add a precise site description to the notes such as distances and orientations from landmarks
	398
	399	It will be very helpful in locating the instrument if you place a flag next to it, preferably in a color other than green or yellow.
	400
	401	Make a mark (digital) of the instrument's location using a GPS device. Record the location both in your paper notes and on the GPS device.
	402
	403	Download the GPS (Garmin) file to a laptop and share drive to share with other GPS devices
	404
	405	Share photos in a shared location (Google photos, OneDrive, Dropbox, etc), but most useful are those added to a Google Maps/Earth location
	406
	407	Create metadata .xml file
	408
	409
7.2	410	== Removing/Demob ==
7.1	411
	412	Download and then use the GPS file to locate the node
	413
	414	Use Google Maps / Google Earth to create a kmz file that can then be imported onto your phone.
	415
	416
7.2	417	Upload photos of the site
7.1	418
	419	- station name
	420
	421	- latitude
	422
	423	- longitude
	424
	425	- elevation
	426
	427	* SN of sensor – SN of battery (optional)
7.2	428	* Site notes and name of location (e.g. Richards garden, Te Mini steam field eastern side)
7.1	429
	430	Upload photos into Google Earth and on a shared drive
	431
	432	Before removing the instrument have your compass, tape, marker, pen, clipboard, logbook and compass ready (in tote bag!).
	433
8.1	434	Write the station name and the instrument’s serial number, along with 'D' and 'C' and ‘R’, each next to a box to indicate 'download' and 'charge'. Stick this label to the top of the instrument. When dealing with dozens or hundreds of these you WILL start to mix them up after a while! Having an easy visual cue keep them sorted will save you a great deal of confusion later on.
7.1	435
	436	Take a photo of the entire setup node with the label on it + compass
	437
	438	Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else
	439
36.2	440	[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png\|\|data-xwiki-image-style-alignment="center"]]
7.1	441
36.2	442
7.1	443	== Charging ==
	444
	445	Clean node prior to charging and harvesting the data
	446
	447	Remove battery (and spike) from the sensor by twisting the spike part of the instrument
	448
	449	Set 16 nodes into the charging box (spikes up)
	450
	451	Red lights on the box next to the batteries will come on and remain a steady red light while charging. This will change to orange, then to green, then to flashing green when fully charged.
	452
	453	This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
	454
7.2	455
8.1	456
7.2	457	== Downloading and Converting Data to MiniSeed ==
	458
	459
	460	The first thing to do is to register the nodes in the system, so the software can recognize them. To do this, go to the folder where the “SmartSoloApps SoloLite” was installed. Then right-click the deviceconfig.exe program to “run as an administrator” and save the file to the directory of “deviceconfig” (snapshot below). Note that to avoid registering the same node twice, you can simply replace the file each time you do the registration.
	461
14.1	462	[[image:1705195543887-977.png]]
7.2	463
8.3	464
7.2	465	Then open the “SoloLite” software, and just go to “File” to make a new project. In this case, you do not need to find the exact 16 nodes that were grouped for script writing. Do not worry about the settings for the seismic recordings for the next window to pop up, as the only way to reset the instruments (e.g., sampling rate, gain etc) is to write script to re-program them.
	466
14.1	467	[[image:1705195543890-537.png\|\|data-xwiki-image-style-alignment="center"]]
7.2	468
8.3	469
7.2	470	Once you create the new project, your Data Transfer View panel on the bottom right of the window will show these nodes that have properly connected to the data harvest, including series number, data size etc. It is okay if the “Prospect not matched”, which simply means the project you just created does not match the one you made to program them. Simply select all these nodes, and right click to “force download”, which will initiate the downloading process. Once they are done, you will see new folders created for each slot at your Downloaded Data panel on the top left of the window.
	471
14.1	472	[[image:1705195543891-334.png\|\|data-xwiki-image-style-alignment="center"]]
7.2	473
8.3	474	At this stage, it means that the raw DLL data of the recording has been downloaded successfully to your local machine. To output data in readable format, such as SAC or miniSEED, click the “Tool” menu and select “export seismic data”. The parameters here should be straightforward to set and tailored to personal reference.
7.2	475
8.3	476	(% class="box warningmessage" %)
	477	(((
	478	Please make sure that data is exported as "COUNTS" and NOT "mV"!
	479	)))
	480
	481	(% class="box warningmessage" %)
	482	(((
	483	Furthermore you must also set "Remove Gain" to the same decibel gain setting that was set during programming! ANU always set this to 18 db (double check) for all types of nodes.
	484	)))
	485
	486	A list of ANU group preferred parameters can be found at the end of this session. One thing to note is that the “Sample Interval” must be set exactly to this used to reset the nodes. Once you are done with the setting, click “prepare” before “run”. If everything works correctly, you should see the reformatting process from the small panel on the bottom left of this popped up window.
	487
7.2	488	Now the data should be ready. Then you can select these data and right click to output the GPS information associated with them.
	489
14.1	490	[[image:1705195543898-365.png\|\|data-xwiki-image-style-alignment="center"]]
7.2	491
	492	When downloading, all the green lights on the nodes will blink. The associated red lights on the rack will flash when it is downloading, and make sure to disconnect the nodes before you unplug anything. Be careful: if the laptop goes to sleep, the download process will pause.
	493
8.3	494	(% class="box infomessage" %)
	495	(((
	496	INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING. USB-C, USB 3.0, and 4+ Tb of space are highly recommended!
	497	)))
7.2	498
	499	When downloading, ensure that all metadata is saved along with the file.
	500
8.1	501	Start and endtime: the system will automatically find the earliest time of the data and set that as the starting time. However, you can set the time a day earlier with a sharp start of 00:00:00. In this case, all the outputted data segments will be 24 hours long starting from midnight.
	502
	503	//Once downloaded, mark the "D" box on your temporary labels!//
	504
	505	== Converting data ==
	506
	507	Check the data all have been converted to miniseed correctly
	508
	509	– 3 files per station per day
	510
	511	* Files are the same size (NOTE if having memory issues one or more of the components may have 0-1 kb)
	512	* ~~ 5 Gb / node / month
	513
	514	//Tick ‘R’ box on the node label//
	515
	516
8.2	517	== Cleaning ==
8.1	518
	519	If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
	520
	521
1.1	522	)))
	523
	524
	525	(% class="col-xs-12 col-sm-4" %)
	526	(((
10.1	527	(% class="box" %)
	528	(((
	529	Contents
1.1	530
10.1	531	(% class="wikitoc" %)
	532	* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]
	533	** [[Sub-paragraph>>path:#HSub-paragraph]]
	534	** [[ >>path:#H]]
	535	* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]
	536	** [[GPS Considerations>>path:#HGPSConsiderations]]
	537	* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]
	538	* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]
	539	* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]
	540	** [[Install>>path:#HInstall]]
	541	** [[Removing/Demob>>path:#HRemoving2FDemob]]
	542	** [[Charging>>path:#HCharging]]
	543	** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]
	544	** [[Converting data>>path:#HConvertingdata]]
	545	** [[Cleaning>>path:#HCleaning]]
	546	)))
1.1	547
8.6	548
11.1	549	(% class="box" %)
10.1	550	(((
11.1	551	= SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =
12.1	552
15.1	553	[[image:Smartsolo IGU BD3C 5 (2).jpg]]
	554
16.1	555	[[image:smartsolo.jpg]]
	556
13.2	557	\|(% style="width:189px" %)Frequency Band\|(% style="width:221px" %)5 Seconds to 150Hz
	558	\|(% style="width:189px" %)Sensitivity\|(% style="width:221px" %)200 V/m/s
	559	\|(% style="width:189px" %)Size (without spike)\|(% style="width:221px" %)158 x160mm
	560	\|(% style="width:189px" %)Weight\|(% style="width:221px" %)2.8 kg
	561	\|(% style="width:189px" %)Data Storage\|(% style="width:221px" %)64 Gb
	562	\|(% style="width:189px" %)Battery\|(% style="width:221px" %)Li_etc XXAh
12.1	563	)))
11.1	564
12.1	565	(% class="box" %)
	566	(((
	567	= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
11.1	568
16.1	569	[[image:smartsolo node.jpg]]
	570
	571	[[image:smartsolo node 2.jpg]]
	572
13.2	573	\|(% style="width:187px" %)Frequency Band\|(% style="width:224px" %)5 Hz to 1652Hz
	574	\|(% style="width:187px" %)Sensitivity\|(% style="width:224px" %)67.7 V/m/s
	575	\|(% style="width:187px" %)Size (with spike)\|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
16.1	576	\|(% style="width:187px" %)Weight\|(% style="width:224px" %)2.3 kg
13.2	577	\|(% style="width:187px" %)Data Storage\|(% style="width:224px" %)64 Gb
	578	\|(% style="width:187px" %)Battery\|(% style="width:224px" %)Li_etc XXAh
10.1	579	)))
4.1	580
9.2	581
1.1	582	)))
	583	)))

Wiki source code of SmartSolo Nodes

Applications

Navigation