SmartSolo Nodes

* Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)

44

45

=== **3- Visibility and Location Marking** ===

46

47

**Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.

**GPS Marking**:

* Use a GPS device to mark the instrument's exact location.

52

* Record this location in both your paper notes and the GPS device.

53

54

=== **4- Data Sharing and Metadata Creation** ===

**GPS Data**:

* Download the GPS file to a laptop.

59

* Share this file on a drive accessible to all team members for uniform understanding of node locations.

**Photo Sharing**:

* Upload site photos to a shared platform (OneDrive, Dropbox, etc.).

64

* Integrating photos into Google Maps or Google Earth can be particularly beneficial for easy location referencing.

**Metadata File**:

* Create a metadata XML file for each node, which is essential for data organisation and future reference.

69

70

=== **5- Additional Best Practices** ===

71

72

* **Environmental Responsibility**: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.

73

* **Training and Familiarisation**: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.

= =

= =

= =

= SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =

blahblah

== Sub-paragraph ==

== ==

= Smart Solo BD3C-5 (5 second) Broad-Band Node =

Lorem

[[image:1705196270090-364.png]]

96

97

98

== GPS Considerations ==

99

100

The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.

101

102

= Keeping the Instruments Clean =

103

104

Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.

105

106

107

= Charge Time, Instrument Life, and Charge During Storage & Shipping =

108

109

Both nodes take about 6-8 hours to charge from flat and hold their charge reasonably well, however you may benefit from a "top up" charge immediately prior to deploy. The instruments should last around 30 days per cycle (recording at 250hz) with GPS on cycle on and bluetooth disabled.

110

111

Upon retrieval, the instruments should not be stored flat as this will damage the batteries. It is recommended to charge them back up "to orange" such that they are charged around ~~50-60%. This is also acceptable for shipping.

112

113

114

= Best Practices and Guide =

== Install ==

Logbook is required (used again for pick up & metadata creation)

- station name

- lat / long

- team members

- date and local time

- SN of sensor

- notes on site

Place nodes in thick (“landfill biodegradable”) plastic bags in the hole

133

134

Take compass measurement away from node and fences [make sure to adjust inclination angle]

135

136

Take many photos from the site from different angles

137

138

Add a precise site description to the notes such as distances and orientations from landmarks

139

140

It will be very helpful in locating the instrument if you place a flag next to it, preferably in a color other than green or yellow.

141

142

Make a mark (digital) of the instrument's location using a GPS device. Record the location both in your paper notes and on the GPS device.

143

144

Download the GPS (Garmin) file to a laptop and share drive to share with other GPS devices

145

146

Share photos in a shared location (Google photos, OneDrive, Dropbox, etc), but most useful are those added to a Google Maps/Earth location

147

148

Create metadata .xml file

== Removing/Demob ==

Download and then use the GPS file to locate the node

154

155

Use Google Maps / Google Earth to create a kmz file that can then be imported onto your phone.

156

157

158

Upload photos of the site

- station name

- latitude

- longitude

- elevation

* SN of sensor – SN of battery (optional)

169

* Site notes and name of location (e.g. Richards garden, Te Mini steam field eastern side)

170

171

Upload photos into Google Earth and on a shared drive

172

173

Before removing the instrument have your compass, tape, marker, pen, clipboard, logbook and compass ready (in tote bag!).

174

175

Write the station name and the instrument’s serial number, along with 'D' and 'C' and ‘R’, each next to a box to indicate 'download' and 'charge'. Stick this label to the top of the instrument. When dealing with dozens or hundreds of these you WILL start to mix them up after a while! Having an easy visual cue keep them sorted will save you a great deal of confusion later on.

176

177

Take a photo of the entire setup node with the label on it + compass

178

179

Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else

== Charging ==

Clean node prior to charging and harvesting the data

185

186

Remove battery (and spike) from the sensor by twisting the spike part of the instrument

187

188

Set 16 nodes into the charging box (spikes up)

189

190

Red lights on the box next to the batteries will come on and remain a steady red light while charging. This will change to orange, then to green, then to flashing green when fully charged.

191

192

This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged

193

194

[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]

== Downloading and Converting Data to MiniSeed ==

199

200

201

The first thing to do is to register the nodes in the system, so the software can recognize them. To do this, go to the folder where the “SmartSoloApps SoloLite” was installed. Then right-click the deviceconfig.exe program to “run as an administrator” and save the file to the directory of “deviceconfig” (snapshot below). Note that to avoid registering the same node twice, you can simply replace the file each time you do the registration.

202

203

[[image:1705195543887-977.png]]

204

205

206

Then open the “SoloLite” software, and just go to “File” to make a new project. In this case, you do not need to find the exact 16 nodes that were grouped for script writing. Do not worry about the settings for the seismic recordings for the next window to pop up, as the only way to reset the instruments (e.g., sampling rate, gain etc) is to write script to re-program them.

207

208

[[image:1705195543890-537.png||data-xwiki-image-style-alignment="center"]]

209

210

211

Once you create the new project, your Data Transfer View panel on the bottom right of the window will show these nodes that have properly connected to the data harvest, including series number, data size etc. It is okay if the “Prospect not matched”, which simply means the project you just created does not match the one you made to program them. Simply select all these nodes, and right click to “force download”, which will initiate the downloading process. Once they are done, you will see new folders created for each slot at your Downloaded Data panel on the top left of the window.

212

213

[[image:1705195543891-334.png||data-xwiki-image-style-alignment="center"]]

214

215

At this stage, it means that the raw DLL data of the recording has been downloaded successfully to your local machine. To output data in readable format, such as SAC or miniSEED, click the “Tool” menu and select “export seismic data”. The parameters here should be straightforward to set and tailored to personal reference.

216

217

(% class="box warningmessage" %)

218

(((

219

**Please make sure that data is exported as "COUNTS" and NOT "mV"!**

220

)))

221

222

(% class="box warningmessage" %)

223

(((

224

**Furthermore you must also set "Remove Gain" to the same decibel gain setting that was set during programming! ANU always set this to 18 db (double check) for all types of nodes.**

225

)))

226

227

A list of ANU group preferred parameters can be found at the end of this session. One thing to note is that the “Sample Interval” must be set exactly to this used to reset the nodes. Once you are done with the setting, click “prepare” before “run”. If everything works correctly, you should see the reformatting process from the small panel on the bottom left of this popped up window.

228

229

Now the data should be ready. Then you can select these data and right click to output the GPS information associated with them.

230

231

[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center"]]

232

233

When downloading, all the green lights on the nodes will blink. The associated red lights on the rack will flash when it is downloading, and make sure to disconnect the nodes before you unplug anything. Be careful: if the laptop goes to sleep, the download process will pause.

234

235

(% class="box infomessage" %)

236

(((

237

**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**. USB-C, USB 3.0, and 4+ Tb of space are highly recommended!

238

)))

239

240

When downloading, ensure that all metadata is saved along with the file.

241

242

Start and endtime: the system will automatically find the earliest time of the data and set that as the starting time. However, you can set the time a day earlier with a sharp start of 00:00:00. In this case, all the outputted data segments will be 24 hours long starting from midnight.

243

244

//Once downloaded, mark the "D" box on your temporary labels!//

245

246

== Converting data ==

247

248

Check the data all have been converted to miniseed correctly

249

250

– 3 files per station per day

251

252

* Files are the same size (NOTE if having memory issues one or more of the components may have 0-1 kb)

253

* ~~ 5 Gb / node / month

254

255

//Tick ‘R’ box on the node label//

== Cleaning ==

If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!

)))

(% class="col-xs-12 col-sm-4" %)

(((

(% class="box" %)

(((

**Contents**

(% class="wikitoc" %)

273

* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]

274

** [[Sub-paragraph>>path:#HSub-paragraph]]

275

** [[ >>path:#H]]

276

* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]

277

** [[GPS Considerations>>path:#HGPSConsiderations]]

278

* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]

279

* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]

280

* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]

281

** [[Install>>path:#HInstall]]

282

** [[Removing/Demob>>path:#HRemoving2FDemob]]

283

** [[Charging>>path:#HCharging]]

284

** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]

285

** [[Converting data>>path:#HConvertingdata]]

286

** [[Cleaning>>path:#HCleaning]]

)))

(% class="box" %)

(((

= SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =

293

294

[[image:Smartsolo IGU BD3C 5 (2).jpg]]

295

296

[[image:smartsolo.jpg]]

297

298

|(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz

299

|(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s

300

|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm

301

|(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg

302

|(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb

303

|(% style="width:189px" %)**Battery**|(% style="width:221px" %)Li_etc XXAh

)))

(% class="box" %)

(((

= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =

309

310

[[image:smartsolo node.jpg]]

311

312

[[image:smartsolo node 2.jpg]]

313

314

|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz

315

|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s

316

|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm

317

|(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.3 kg

318

|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb

319

|(% style="width:187px" %)**Battery**|(% style="width:224px" %)Li_etc XXAh

)))

)))

)))

Wiki source code of SmartSolo Nodes

Applications

Navigation