Skip to Content
Last modified by robert on 2026/01/19 17:43
From version 96.2
edited by KB
on 2026/01/19 13:47
Change comment: There is no comment for this version
To version 95.1
edited by KB
on 2026/01/19 13:40
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,11 +23,10 @@
23 23  
24 24  The nodes must be programmed in the SoloLite software prior to use. The screenshots below show our recommended parameters for the 5 Hz (16HR-3C) and 5 second (BDC3-5) nodes.
25 25  
26 -[[IGU16HR-3C programming screen set at 250 hz. Ensure circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen" data-xwiki-image-label="IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!"]]
26 +[[IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]]
27 27  
28 -[[BD3C-5 programming screen set at 250 hz. Ensure circled areas are set!>>image:5S_node_programming.labels.png||alt="BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!"]]
28 +[[BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!>>image:5S_node_programming.labels.png||alt="BD3C-5 programming screen"]]
29 29  
30 -
31 31  FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
32 32  
33 33  Note that the samplerate is instead given in sample spacing, in milliseconds. 4 ms = 250 Hz, 1 ms = 1000 Hz, 10 ms = 100 Hz, ad nauseam.
5S_node_programming.labels.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.KB
Size
... ... @@ -1,1 +1,0 @@
1 -114.2 KB
Content