Skip to Content
Last modified by robert on 2026/01/19 17:43
From version 96.1
edited by KB
on 2026/01/19 13:43
Change comment: There is no comment for this version
To version 94.5
edited by KB
on 2026/01/19 13:22
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,9 +23,9 @@
23 23  
24 24  The nodes must be programmed in the SoloLite software prior to use. The screenshots below show our recommended parameters for the 5 Hz (16HR-3C) and 5 second (BDC3-5) nodes.
25 25  
26 -[[IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]][[image:5S_node_programming.labels.png||alt="BD3C-5 programming screen"]][[image:5S_node_programming.labels.png]]
26 +[[IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]]
27 27  
28 -BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!
28 +[[BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!>>image:5S_node_programming.labels.png||alt="BD3C-5 programming screen"]]
29 29  
30 30  FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
31 31  
... ... @@ -415,23 +415,21 @@
415 415  
416 416  = **Cleaning** =
417 417  
418 -When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
418 +When still connected, the nodes are water resistant (don't submerge them!) and can handle a good spray / wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
419 419  
420 420  = **Weights (for shipping)** =
421 421  
422 422  The weights of bags of nodes, as well as data harvesters and node chargers, are listed below:
423 423  
424 -1 bag + 6*IGU-16HR nodes: 18 kg
424 +1 bag + 6 SP (IGU-16HR) nodes: 18 kg
425 425  
426 -1*IGU-16HR data harvester: 21.5 kg
426 +1 SP (IGU-16HR) data harvester: 21.5 kg
427 427  
428 -1*IGU-16HR charger: 26.3 kg
428 +1 SP (IGU-16HR) charger: 26.3 kg
429 429  
430 -1*BD3C-5 charger (with and without 16 cables): 21 kg / 14.5 kg
430 +1 BB (BD3C-5) charger/data harvester (with and without 16 cables): 21 kg / 14.5 kg
431 431  
432 -1 case + 5*BD3C-5 nodes: 22 kg (aggregate battery weight <5kg, 168Wh)
433 -
434 -1 case + 6*BD3C-5 nodes: 25 kg (aggregate battery weight >5kg, 168Wh)
432 +1 case + 5 BB (BD3C-5) nodes and 6 BB nodes: 22 kg / 25 kg
435 435  )))
436 436  
437 437  (% class="col-xs-12 col-sm-4" %)
5S_node_programming.labels.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.KB
Size
... ... @@ -1,1 +1,0 @@
1 -114.2 KB
Content