Skip to Content
Last modified by robert on 2026/01/19 17:43
From version 95.1
edited by KB
on 2026/01/19 13:40
Change comment: There is no comment for this version
To version 95.2
edited by KB
on 2026/01/19 13:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,9 +23,9 @@
23 23  
24 24  The nodes must be programmed in the SoloLite software prior to use. The screenshots below show our recommended parameters for the 5 Hz (16HR-3C) and 5 second (BDC3-5) nodes.
25 25  
26 -[[IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]]
26 +[[IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]][[image:5S_node_programming.labels.png||alt="BD3C-5 programming screen"]][[image:5S_node_programming.labels.png]]
27 27  
28 -[[BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!>>image:5S_node_programming.labels.png||alt="BD3C-5 programming screen"]]
28 +BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!
29 29  
30 30  FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
31 31  
5S_node_programming.labels.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.KB
Size
... ... @@ -1,0 +1,1 @@
1 +114.2 KB
Content