Skip to Content
Last modified by robert on 2026/01/19 17:43
From version 94.5
edited by KB
on 2026/01/19 13:22
Change comment: There is no comment for this version
To version 98.1
edited by robert
on 2026/01/19 17:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.KB
1 +XWiki.robert
Content
... ... @@ -23,10 +23,11 @@
23 23  
24 24  The nodes must be programmed in the SoloLite software prior to use. The screenshots below show our recommended parameters for the 5 Hz (16HR-3C) and 5 second (BDC3-5) nodes.
25 25  
26 -[[IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]]
26 +[[IGU16HR-3C programming screen set at 250 Hz. Ensure circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]]
27 27  
28 -[[BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!>>image:5S_node_programming.labels.png||alt="BD3C-5 programming screen"]]
28 +[[BD3C-5 programming screen set at 250 Hz. Ensure circled areas are set!>>image:5S_node_programming.labels.png||alt="BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!"]]
29 29  
30 +
30 30  FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
31 31  
32 32  Note that the samplerate is instead given in sample spacing, in milliseconds. 4 ms = 250 Hz, 1 ms = 1000 Hz, 10 ms = 100 Hz, ad nauseam.
... ... @@ -68,6 +68,8 @@
68 68  
69 69  We have experienced interference from animals (foxes, dogs, goats) digging up and carrying nodes off for tens or hundreds of metres. It is helpful to minimise human and food smells (particularly on the rope handles) when working in areas where this is a risk. Or, wipe down affected nodes with 50-80% methylated spirits if extensive handling can not be avoided.
70 70  
72 +If you come to collect your node and it is missing~-~- LOOK FOR IT! It may not have gotten far. We have found dozens of nodes by spending 15 minutes looking for them.
73 +
71 71  = **Installation** =
72 72  
73 73  (% class="box infomessage" %)
... ... @@ -328,7 +328,7 @@
328 328  
329 329  See [[https:~~/~~/auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodeZPolaritybug>>https://auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodeZPolaritybug]] for discussion. If data is headed to AusPass, we prefer to invert the IGU-16HR channel data manually rather than in the SoloLite software or inverting the response metadata.
330 330  
331 -**The BD3C-5 data does not require a polarity inversion.**
334 +**The BD3C-5 data does not require any sort of polarity inversion.**
332 332  
333 333  == 18 Leap Second bug ==
334 334  
... ... @@ -415,21 +415,23 @@
415 415  
416 416  = **Cleaning** =
417 417  
418 -When still connected, the nodes are water resistant (don't submerge them!) and can handle a good spray / wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
421 +When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
419 419  
420 420  = **Weights (for shipping)** =
421 421  
422 422  The weights of bags of nodes, as well as data harvesters and node chargers, are listed below:
423 423  
424 -1 bag + 6 SP (IGU-16HR) nodes: 18 kg
427 +1 bag + 6*IGU-16HR nodes: 18 kg
425 425  
426 -1 SP (IGU-16HR) data harvester: 21.5 kg
429 +1*IGU-16HR data harvester: 21.5 kg
427 427  
428 -1 SP (IGU-16HR) charger: 26.3 kg
431 +1*IGU-16HR charger: 26.3 kg
429 429  
430 -1 BB (BD3C-5) charger/data harvester (with and without 16 cables): 21 kg / 14.5 kg
433 +1*BD3C-5 charger (with and without 16 cables): 21 kg / 14.5 kg
431 431  
432 -1 case + 5 BB (BD3C-5) nodes and 6 BB nodes: 22 kg / 25 kg
435 +1 case + 5*BD3C-5 nodes: 22 kg (aggregate battery weight <5kg, 168Wh)
436 +
437 +1 case + 6*BD3C-5 nodes: 25 kg (aggregate battery weight >5kg, 168Wh)
433 433  )))
434 434  
435 435  (% class="col-xs-12 col-sm-4" %)
5S_node_programming.labels.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.KB
Size
... ... @@ -1,0 +1,1 @@
1 +114.2 KB
Content