Skip to Content
Last modified by robert on 2026/01/19 17:43
From version 91.2
edited by robert
on 2026/01/16 11:17
Change comment: There is no comment for this version
To version 94.3
edited by KB
on 2026/01/19 11:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.KB
Content
... ... @@ -21,11 +21,11 @@
21 21  
22 22  = **Programming Defaults** =
23 23  
24 -The nodes must be programmed in the SoloLite software prior to use. Screenshots for the short period 16HR-3C and broadband BDC3-5 are shown with our recommended parameters.
24 +The nodes must be programmed in the SoloLite software prior to use. The screenshots below show our recommended parameters for the 5 Hz (16HR-3C) and 5 second (BDC3-5) nodes.
25 25  
26 -[[IGU-16 3C (short period node) programming screen set at 250 Hz. Ensure that the highlighted areas are set!>>image:SP_programming.labels.png||alt="IGU-16 3C programming screen"]]
26 +[[IGU-16 3C programming screen set at 250 Hz. Ensure that the circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]]
27 27  
28 -[[BD3C-5 (broadband node) programming screen set at 250 hz. Ensure that the highlighted areas are set!>>image:BB_programming.labels.png||alt="BD3C-5 programming screen"]]
28 +[[BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!>>image:BB_programming.labels.png||alt="BD3C-5 programming screen"]]
29 29  
30 30  FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
31 31  
5Hz_node_programming.labels.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.KB
Size
... ... @@ -1,0 +1,1 @@
1 +109.8 KB
Content