Changes for page SmartSolo Node Seismometers

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -44,6 +44,18 @@
44	44	**Note that any applied instrument gain must be removed when exporting (e.g. to miniseed) after your deploy, **otherwise amplitudes will be a factor of either 15.84893192 (24db) or 2 (6db) too high!
45	45	{{/info}}
46	46
	47	+=== **Programming tips**: ===
	48	+
	49	+Connecting SmartSolo nodes to their harvesters and having SoloLite recognise them can be a bit tricky, here are some tricks to help register and program them easier:
	50	+
	51	+ - Place the node on the harvester gently, then firmly press it down onto the pins
	52	+
	53	+ - Place all nodes onto the harvester before trying any troubleshooting, as they may not show up while the SoloLite software is running. Once all are connected, try  restarting the software for them to be recognised.
	54	+
	55	+ - If a node is refusing to connect, try it with another slot. It is easiest if you place all 16 nodes on the harvester, and swap any nodes that refuse to connect with eachother
	56	+
	57	+ - Nodes will likely not show up in the order that they should, though this is not an issue. Eg, a node in slot 6 on the harvester may show up in port 13 in the SoloLite software
	58	+
47	47	= **Fieldwork Preparation** =
48	48
49	49	(% class="box warningmessage" %)
...	...	@@ -280,6 +280,10 @@
280	280	)))
281	281	)))
282	282
	295	+== Smart Solo Z Polarity bug ==
	296	+
	297	+See [[https:~~/~~/auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodeZPolaritybug>>https://auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodeZPolaritybug]] for discussion. If data is headed to AusPass, we prefer to invert the IGU-16HR 3 Z channel data manually rather than invert the response metadata. The BD3C-5 data does not require a polarity inversion.
	298	+
283	283	== Handling Nodes During Download ==
284	284
285	285	1. (((