Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 8.3
edited by robert
on 2024/01/14 12:46
Change comment: There is no comment for this version
To version 40.1
edited by Sima Mousavi
on 2024/01/25 14:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.sima
Content
... ... @@ -2,6 +2,343 @@
2 2  (((
3 3  (% class="col-xs-12 col-sm-8" %)
4 4  (((
5 += **SmartSolo Node Types and Procedures** =
6 +
7 +**SmartSolo Node Variants:**
8 +
9 +* **SmartSolo IGU 16HR 3C (5 Hz) Short Period Node**
10 +* **SmartSolo BD3C-5 (5-second) Broad-Band Node**
11 +
12 +The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
13 +
14 +This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
15 +
16 +----
17 +
18 += **Node Setup** =
19 +
20 +Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
21 +
22 +
23 +~*~**this needs to be reformatted
24 +
25 +== **Pre-Fieldwork Preparation** ==
26 +
27 +(% class="box infomessage" %)
28 +(((
29 +(% class="box warningmessage" %)
30 +(((
31 +**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**
32 +
33 +**Plan on 1 Tb to store ALL data for 50 nodes @ 250 Hz and a single ~~30 day occupation**
34 +)))
35 +)))
36 +
37 += **Installation** =
38 +
39 +=== **1- Logbook documentation** ===
40 +
41 +(((
42 +**Essential Details**: Record the following in a logbook:
43 +
44 +* Station name
45 +* Latitude and longitude
46 +* Names of team members present
47 +* Date and local time of installation
48 +* Serial number (SN) of the sensor
49 +* Detailed notes on the site conditions and setup
50 +
51 +=== **2- Node Placement** ===
52 +)))
53 +
54 +**Protection**: Place nodes inside thick, landfill biodegradable plastic bags for environmental protection.
55 +
56 +**Site Analysis**:
57 +
58 +* Conduct compass measurements away from the node and metallic structures, adjusting for inclination angle.
59 +* Take multiple photographs from various angles to document the site setup thoroughly.
60 +* Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
61 +
62 +=== **3- GPS Considerations** ===
63 +
64 +(% class="wikigeneratedid" %)
65 +The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
66 +
67 +=== **4- Visibility and Location Marking** ===
68 +
69 +**Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
70 +
71 +**GPS Marking**:
72 +
73 +* Use a GPS device to mark the instrument's exact location.
74 +* Record this location in both your paper notes and the GPS device.
75 +
76 +=== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5- Charge Time, Pre-Deployment & Post-Deployment**(%%) ===
77 +
78 +* **Charging Duration**: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
79 +* **Pre-Deployment Charging**:
80 +** Although the nodes hold their charge well, it's beneficial to give them a "top up" charge right before deployment.
81 +
82 +* **Operational Duration**:
83 +** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle.
84 +
85 +* **Post-Retrieval Charging**:
86 +** Do not store the instruments with completely drained batteries.
87 +** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) for optimal battery health.
88 +
89 +* **Storage and Shipping Charge Level**:
90 +** Maintain a battery charge level of around 50-60% for both storage and shipping purposes.
91 +** This charge level is recommended to prevent battery damage and is safe for transportation.
92 +
93 +=== ===
94 +
95 +* (((
96 +=== **6- Data Sharing and Metadata Creation** ===
97 +)))
98 +
99 +**GPS Data**:
100 +
101 +* Download the GPS file to a laptop.
102 +* Share this file on a drive accessible to all team members for uniform understanding of node locations.
103 +
104 +**Photo Sharing**:
105 +
106 +* Upload site photos to a shared platform (OneDrive, Dropbox, etc.).
107 +* Integrating photos into Google Maps or Google Earth can be particularly beneficial for easy location referencing.
108 +
109 +**Metadata File**:
110 +
111 +* Create a metadata XML file for each node, which is essential for data organisation and future reference.
112 +
113 +=== **7- Additional Best Practices** ===
114 +
115 +* **Environmental Responsibility**: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.
116 +* **Training and Familiarisation**: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.
117 +
118 +* (((
119 +==== **Keeping the Instruments Clean** ====
120 +)))
121 +* (((
122 +Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
123 +)))
124 +
125 +----
126 +
127 +=== **Seismic Station Demobilization and Documentation** ===
128 +
129 +1. (((
130 +**Preparation for Demobilization**:
131 +
132 +* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
133 +)))
134 +1. (((
135 +**Locating the instrument**:
136 +
137 +* Use the downloaded GPS file to accurately locate the node for demobilization.
138 +* Import this KMZ file onto your phone for easy reference and location tracking.
139 +* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
140 +)))
141 +1. (((
142 +**Labeling Instruments for Demobilization**:
143 +
144 +* Write the station name and the instrument’s serial number on a label.
145 +* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
146 +* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
147 +)))
148 +1. (((
149 +**Photographing the Setup Node**:
150 +
151 +* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
152 +* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
153 +)))
154 +1. (((
155 +**Logging Demobilization Details**:
156 +
157 +* Use the field logbook to note the time of demobilization, serial numbers, and station name.
158 +* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
159 +)))
160 +1. (((
161 +**Final Checks and Equipment Removal**:
162 +
163 +* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
164 +* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
165 +
166 +
167 +)))
168 +
169 +[[image:1706153556166-231.jpeg||data-xwiki-image-style-alignment="center" height="345" width="460"]]
170 +
171 +----
172 +
173 +=== **Charging Procedure for Seismic Nodes** ===
174 +
175 +1. (((
176 +**Preparation for Charging**:
177 +
178 +* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
179 +)))
180 +1. (((
181 +**Disassembling the Node**:
182 +
183 +* Carefully remove the battery and the spike from the sensor. This is typically done by twisting the spike part of the instrument to release these components.
184 +)))
185 +1. (((
186 +**Setting Nodes in the Charging Box**:
187 +
188 +* Place up to 16 nodes into the charging box, arranging them with the spikes pointing upwards. This configuration is essential for proper connection and efficient charging.
189 +)))
190 +1. (((
191 +**Monitoring the Charging Process**:
192 +
193 +* Once the nodes are set in the charging box and the charging process begins, red lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
194 +* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged.
195 +)))
196 +1. (((
197 +**Updating Charge Status**:
198 +
199 +* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
200 +* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
201 +)))
202 +
203 +[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center" height="299" width="530"]]
204 +
205 +
206 +
207 +
208 +[[image:1706153354750-415.png||data-xwiki-image-style-alignment="center" height="317" width="562"]]
209 +
210 +----
211 +
212 +=== **Downloading and Converting Seismic Data to MiniSeed Format** ===
213 +
214 +==== **Node Registration and Software Setup** ====
215 +
216 +1. (((
217 +**Registering Nodes in the System**:
218 +
219 +* To begin, register the nodes in the system so the software can recognize them.
220 +* Navigate to the installation folder of “SmartSoloApps SoloLite”.
221 +* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
222 +* To avoid double registration, replace the file each time you register a new node.
223 +)))
224 +1. (((
225 +**Creating a New Project in SoloLite**:
226 +
227 +* Open the “SoloLite” software.
228 +* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
229 +* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
230 +)))
231 +
232 +==== **Data Downloading Process** ====
233 +
234 +1. (((
235 +**Initiating Data Download**:
236 +
237 +* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
238 +* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
239 +* Select all nodes and right-click to “force download”. This starts the download process.
240 +* Completed downloads will appear as new folders in the Downloaded Data panel.
241 +)))
242 +1. (((
243 +**Exporting Data in Readable Format**:
244 +
245 +* Go to the “Tool” menu and select “export seismic data”.
246 +* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
247 +* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
248 +* (% class="box warningmessage" %)
249 +(((
250 +* **Ensure to export data as "COUNTS", not "mV".**
251 +
252 +* **Set "Remove Gain" to the same decibel gain as during programming (ANU usually sets this to 18 db, but double-check).**
253 +)))
254 +)))
255 +
256 +==== **Handling Nodes During Download** ====
257 +
258 +1. (((
259 +**Monitoring Download Indicators**:
260 +
261 +* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
262 +* Disconnect nodes properly before unplugging anything.
263 +* Be cautious: if the laptop enters sleep mode, the download will pause.
264 +)))
265 +1. (((
266 +//**Investment in Storage Hardware**~://
267 +
268 +* (% class="box warningmessage" %)
269 +(((
270 +* **Use fast external hard drives to avoid limitations in data harvesting.**
271 +
272 +* **Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.**
273 +)))
274 +)))
275 +1. (((
276 +**Metadata and Time Settings**:
277 +
278 +* Ensure all metadata is saved with the file.
279 +* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
280 +)))
281 +1. (((
282 +**Finalizing the Download**:
283 +
284 +* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
285 +
286 +
287 +)))
288 +
289 +[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
290 +
291 +
292 +
293 +[[Caption>>image:1705195543887-977.png||data-xwiki-image-style-alignment="center" height="534" width="632"]]
294 +
295 +
296 +
297 +
298 +[[Caption>>image:1705195543890-537.png||data-xwiki-image-style-alignment="center" height="397" width="665"]]
299 +
300 +
301 +
302 +[[Caption>>image:1705195543891-334.png||data-xwiki-image-style-alignment="center" height="379" width="650"]]
303 +
304 +
305 +
306 +[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center" height="467" width="674"]]
307 +
308 +----
309 +
310 +=== **Cleaning** ===
311 +
312 +**Procedure for Seismic Nodes:**
313 +
314 +* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
315 +
316 += =
317 +
318 += =
319 +
320 += =
321 +
322 += =
323 +
324 += =
325 +
326 += =
327 +
328 += =
329 +
330 += **~=~=~=~=~=~=~=~=~=~=Done! Should be deleted from here~=~=~=~=~=~=~=~=~=~=~=** =
331 +
332 += =
333 +
334 += =
335 +
336 += =
337 +
338 += =
339 +
340 += =
341 +
5 5  = SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
6 6  
7 7  blahblah
... ... @@ -9,7 +9,7 @@
9 9  == Sub-paragraph ==
10 10  
11 11  
12 -== ==
349 +== [[image:1705196270090-364.png]] ==
13 13  
14 14  
15 15  = Smart Solo BD3C-5 (5 second) Broad-Band Node =
... ... @@ -16,9 +16,7 @@
16 16  
17 17  Lorem
18 18  
19 -[[image:1705196270090-364.png]]
20 20  
21 -
22 22  == GPS Considerations ==
23 23  
24 24  The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
... ... @@ -25,7 +25,7 @@
25 25  
26 26  = Keeping the Instruments Clean =
27 27  
28 -Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
363 +Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
29 29  
30 30  
31 31  = Charge Time, Instrument Life, and Charge During Storage & Shipping =
... ... @@ -102,7 +102,9 @@
102 102  
103 103  Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else
104 104  
440 +[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
105 105  
442 +
106 106  == Charging ==
107 107  
108 108  Clean node prior to charging and harvesting the data
... ... @@ -115,10 +115,8 @@
115 115  
116 116  This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
117 117  
118 -[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
119 119  
120 120  
121 -
122 122  == Downloading and Converting Data to MiniSeed ==
123 123  
124 124  
... ... @@ -189,33 +189,60 @@
189 189  
190 190  (% class="col-xs-12 col-sm-4" %)
191 191  (((
192 -{{box title="**Contents**"}}
193 -{{toc/}}
194 -{{/box}}
527 +(% class="box" %)
528 +(((
529 +**Contents**
195 195  
196 -{{box title="= SmartSolo [[BD3C-5>>https://smartsolo.com/cp-4.html]] =
531 +(% class="wikitoc" %)
532 +* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]
533 +** [[Sub-paragraph>>path:#HSub-paragraph]]
534 +** [[ >>path:#H]]
535 +* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]
536 +** [[GPS Considerations>>path:#HGPSConsiderations]]
537 +* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]
538 +* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]
539 +* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]
540 +** [[Install>>path:#HInstall]]
541 +** [[Removing/Demob>>path:#HRemoving2FDemob]]
542 +** [[Charging>>path:#HCharging]]
543 +** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]
544 +** [[Converting data>>path:#HConvertingdata]]
545 +** [[Cleaning>>path:#HCleaning]]
546 +)))
197 197  
198 -= [[image:Trillium compact posthole.jpg]] =
199 199  
200 -|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)5 seconds
201 -|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
202 -|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
203 -|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
204 -
205 -{{/box}}
549 +(% class="box" %)
550 +(((
551 += SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =
206 206  
207 -{{box title="= SmartSolo [[IGU-16HR>>https://smartsolo.com/cp-3.html]] =
553 +[[image:Smartsolo IGU BD3C 5 (2).jpg]]
208 208  
209 -= [[image:Trillium compact posthole.jpg]] =
555 +[[image:smartsolo.jpg]]
210 210  
211 -|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)0.2 seconds (5 Hz)
212 -|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
213 -|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
214 -|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
215 -
216 -{{/box}}
557 +|(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz
558 +|(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s
559 +|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm
560 +|(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg
561 +|(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb
562 +|(% style="width:189px" %)**Battery**|(% style="width:221px" %)Li_etc XXAh
563 +)))
217 217  
565 +(% class="box" %)
566 +(((
567 += SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
218 218  
569 +[[image:smartsolo node.jpg]]
570 +
571 +[[image:smartsolo node 2.jpg]]
572 +
573 +|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz
574 +|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s
575 +|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
576 +|(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.3 kg
577 +|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb
578 +|(% style="width:187px" %)**Battery**|(% style="width:224px" %)Li_etc XXAh
579 +)))
580 +
219 219  
220 220  )))
221 221  )))
1706153266647-145.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.sima
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 MB
Content
1706153354750-415.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.sima
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 MB
Content
1706153556166-231.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.sima
Size
... ... @@ -1,0 +1,1 @@
1 +839.4 KB
Content
Smartsolo IGU BD3C 5 (2).jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +909.0 KB
Content
Smartsolo IGU BD3C 5.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +2.7 MB
Content
smartsolo node 2.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +1.0 MB
Content
smartsolo node.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
smartsolo.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +1.0 MB
Content