Changes for page SmartSolo Node Seismometers

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 9 added, 0 removed)
  • 1705196270090-364.png
  • 1706153266647-145.png
  • 1706153354750-415.png
  • 1706153556166-231.jpeg
  • Smartsolo IGU BD3C 5 (2).jpg
  • Smartsolo IGU BD3C 5.jpg
  • smartsolo node 2.jpg
  • smartsolo node.jpg
  • smartsolo.jpg

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.robert
	1	+XWiki.sima

Content

...	...	@@ -2,201 +2,376 @@
2	2	(((
3	3	(% class="col-xs-12 col-sm-8" %)
4	4	(((
5		-= SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
	5	+= **SmartSolo Node Types and Procedures** =
6	6
7		-blahblah
	7	+**SmartSolo Node Variants:**
8	8
9		-== Sub-paragraph ==
	9	+* **SmartSolo IGU 16HR 3C (5 Hz) Short Period Node**
	10	+* **SmartSolo BD3C-5 (5-second) Broad-Band Node**
10	10
	12	+The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
11	11
12		-== ==
	14	+This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
13	13
	16	+----
14	14
15		-= Smart Solo BD3C-5 (5 second) Broad-Band Node =
	18	+= **Node Setup** =
16	16
17		-Lorem
	20	+Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
18	18
19	19
20		-== GPS Considerations ==
	23	+~*~**this needs to be reformatted
21	21
22		-The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
	25	+== **Pre-Fieldwork Preparation** ==
23	23
24		-== Keeping the Instruments Clean ==
	27	+(% class="box infomessage" %)
	28	+(((
	29	+(% class="box warningmessage" %)
	30	+(((
	31	+**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**
25	25
26		-Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
	33	+**Plan on 1 Tb to store ALL data for 50 nodes @ 250 Hz and a single ~~30 day occupation**
	34	+)))
	35	+)))
27	27
	37	+= **Installation** =
28	28
29		-= Charge Time, Instrument Life, and Charge During Storage & Shipping =
	39	+=== **1- Logbook documentation** ===
30	30
31		-Both nodes take about 6-8 hours to charge from flat and hold their charge reasonably well, however you may benefit from a "top up" charge immediately prior to deploy. The instruments should last around 30 days per cycle (recording at 250hz) with GPS on cycle on and bluetooth disabled.
	41	+(((
	42	+**Essential Details**: Record the following in a logbook:
32	32
33		-Upon retrieval, the instruments should not be stored flat as this will damage the batteries. It is recommended to charge them back up "to orange" such that they are charged around ~~50-60%. This is also acceptable for shipping.
	44	+* Station name
	45	+* Latitude and longitude
	46	+* Names of team members present
	47	+* Date and local time of installation
	48	+* Serial number (SN) of the sensor
	49	+* Detailed notes on the site conditions and setup
34	34
	51	+=== **2- Node Placement** ===
	52	+)))
35	35
36		-= Best Practices and Guide =
	54	+**Protection**: Place nodes inside thick, landfill biodegradable plastic bags for environmental protection.
37	37
38		-== Install ==
	56	+**Site Analysis**:
39	39
40		-Logbook is required (used again for pick up & metadata creation)
	58	+* Conduct compass measurements away from the node and metallic structures, adjusting for inclination angle.
	59	+* Take multiple photographs from various angles to document the site setup thoroughly.
	60	+* Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
41	41
42		-- station name
	62	+=== **3- GPS Considerations** ===
43	43
44		-- lat / long
	64	+(% class="wikigeneratedid" %)
	65	+The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
45	45
46		-- team members
	67	+=== **4- Visibility and Location Marking** ===
47	47
48		-- date and local time
	69	+**Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
49	49
50		-- SN of sensor
	71	+**GPS Marking**:
51	51
52		-- notes on site
	73	+* Use a GPS device to mark the instrument's exact location.
	74	+* Record this location in both your paper notes and the GPS device.
53	53
54		-Place nodes in thick (“landfill biodegradable”) plastic bags in the hole
	76	+=== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5- Charge Time, Pre-Deployment & Post-Deployment**(%%) ===
55	55
56		-Take compass measurement away from node and fences [make sure to adjust inclination angle]
	78	+* **Charging Duration**: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
	79	+* **Pre-Deployment Charging**:
	80	+** Although the nodes hold their charge well, it's beneficial to give them a "top up" charge right before deployment.
57	57
58		-Take many photos from the site from different angles
	82	+* **Operational Duration**:
	83	+** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle.
59	59
60		-Add a precise site description to the notes such as distances and orientations from landmarks
	85	+* **Post-Retrieval Charging**:
	86	+** Do not store the instruments with completely drained batteries.
	87	+** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) for optimal battery health.
61	61
62		-It will be very helpful in locating the instrument if you place a flag next to it, preferably in a color other than green or yellow.
	89	+* **Storage and Shipping Charge Level**:
	90	+** Maintain a battery charge level of around 50-60% for both storage and shipping purposes.
	91	+** This charge level is recommended to prevent battery damage and is safe for transportation.
63	63
64		-Make a mark (digital) of the instrument's location using a GPS device. Record the location both in your paper notes and on the GPS device.
	93	+=== ===
65	65
66		-Download the GPS (Garmin) file to a laptop and share drive to share with other GPS devices
	95	+* (((
	96	+=== **6- Data Sharing and Metadata Creation** ===
	97	+)))
67	67
68		-Share photos in a shared location (Google photos, OneDrive, Dropbox, etc), but most useful are those added to a Google Maps/Earth location
	99	+**GPS Data**:
69	69
70		-Create metadata .xml file
	101	+* Download the GPS file to a laptop.
	102	+* Share this file on a drive accessible to all team members for uniform understanding of node locations.
71	71
	104	+**Photo Sharing**:
72	72
73		-== Removing/Demob ==
	106	+* Upload site photos to a shared platform (OneDrive, Dropbox, etc.).
	107	+* Integrating photos into Google Maps or Google Earth can be particularly beneficial for easy location referencing.
74	74
75		-Download and then use the GPS file to locate the node
	109	+**Metadata File**:
76	76
77		-Use Google Maps / Google Earth to create a kmz file that can then be imported onto your phone.
	111	+* Create a metadata XML file for each node, which is essential for data organisation and future reference.
78	78
	113	+=== **7- Additional Best Practices** ===
79	79
80		-Upload photos of the site
	115	+* **Environmental Responsibility**: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.
	116	+* **Training and Familiarisation**: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.
81	81
82		-- station name
	118	+* (((
	119	+==== **Keeping the Instruments Clean** ====
	120	+)))
	121	+* (((
	122	+Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
	123	+)))
83	83
84		-- latitude
	125	+----
85	85
86		-- longitude
	127	+=== **Seismic Station Demobilization and Documentation** ===
87	87
88		-- elevation
	129	+1. (((
	130	+**Preparation for Demobilization**:
89	89
90		-* SN of sensor – SN of battery (optional)
91		-* Site notes and name of location (e.g. Richards garden, Te Mini steam field eastern side)
	132	+* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
	133	+)))
	134	+1. (((
	135	+**Locating the instrument**:
92	92
93		-Upload photos into Google Earth and on a shared drive
	137	+* Use the downloaded GPS file to accurately locate the node for demobilization.
	138	+* Import this KMZ file onto your phone for easy reference and location tracking.
	139	+* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
	140	+)))
	141	+1. (((
	142	+**Labeling Instruments for Demobilization**:
94	94
95		-Before removing the instrument have your compass, tape, marker, pen, clipboard, logbook and compass ready (in tote bag!).
	144	+* Write the station name and the instrument’s serial number on a label.
	145	+* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
	146	+* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
	147	+)))
	148	+1. (((
	149	+**Photographing the Setup Node**:
96	96
97		-Write the station name and the instrument’s serial number, along with 'D' and 'C' and ‘R’, each next to a box to indicate 'download' and 'charge'. Stick this label to the top of the instrument. When dealing with dozens or hundreds of these you WILL start to mix them up after a while! Having an easy visual cue keep them sorted will save you a great deal of confusion later on.
	151	+* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
	152	+* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
	153	+)))
	154	+1. (((
	155	+**Logging Demobilization Details**:
98	98
99		-Take a photo of the entire setup node with the label on it + compass
	157	+* Use the field logbook to note the time of demobilization, serial numbers, and station name.
	158	+* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
	159	+)))
	160	+1. (((
	161	+**Final Checks and Equipment Removal**:
100	100
101		-Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else
	163	+* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
	164	+* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
102	102
	166	+
	167	+)))
103	103
104		-== Charging ==
	169	+[[image:1706153556166-231.jpeg||data-xwiki-image-style-alignment="center" height="345" width="460"]]
105	105
106		-Clean node prior to charging and harvesting the data
	171	+----
107	107
108		-Remove battery (and spike) from the sensor by twisting the spike part of the instrument
	173	+=== **Charging Procedure for Seismic Nodes** ===
109	109
110		-Set 16 nodes into the charging box (spikes up)
	175	+1. (((
	176	+**Preparation for Charging**:
111	111
112		-Red lights on the box next to the batteries will come on and remain a steady red light while charging. This will change to orange, then to green, then to flashing green when fully charged.
	178	+* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
	179	+)))
	180	+1. (((
	181	+**Disassembling the Node**:
113	113
114		-This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
	183	+* Carefully remove the battery and the spike from the sensor. This is typically done by twisting the spike part of the instrument to release these components.
	184	+)))
	185	+1. (((
	186	+**Setting Nodes in the Charging Box**:
115	115
116		-[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
	188	+* Place up to 16 nodes into the charging box, arranging them with the spikes pointing upwards. This configuration is essential for proper connection and efficient charging.
	189	+)))
	190	+1. (((
	191	+**Monitoring the Charging Process**:
117	117
	193	+* Once the nodes are set in the charging box and the charging process begins, red lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
	194	+* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged.
	195	+)))
	196	+1. (((
	197	+**Updating Charge Status**:
118	118
	199	+* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
	200	+* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
	201	+)))
119	119
120		-== Downloading and Converting Data to MiniSeed ==
	203	+[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center" height="299" width="530"]]
121	121
122	122
123		-The first thing to do is to register the nodes in the system, so the software can recognize them. To do this, go to the folder where the “SmartSoloApps SoloLite” was installed. Then right-click the deviceconfig.exe program to “run as an administrator” and save the file to the directory of “deviceconfig” (snapshot below). Note that to avoid registering the same node twice, you can simply replace the file each time you do the registration.
124	124
125		-[[image:1705195543887-977.png]]
126	126
127		-Then open the “SoloLite” software, and just go to “File” to make a new project. In this case, you do not need to find the exact 16 nodes that were grouped for script writing. Do not worry about the settings for the seismic recordings for the next window to pop up, as the only way to reset the instruments (e.g., sampling rate, gain etc) is to write script to re-program them.
	208	+[[image:1706153354750-415.png||data-xwiki-image-style-alignment="center" height="317" width="562"]]
128	128
129		-[[image:1705195543890-537.png||data-xwiki-image-style-alignment="center"]]
	210	+----
130	130
131		-Once you create the new project, your Data Transfer View panel on the bottom right of the window will show these nodes that have properly connected to the data harvest, including series number, data size etc. It is okay if the “Prospect not matched”, which simply means the project you just created does not match the one you made to program them. Simply select all these nodes, and right click to “force download”, which will initiate the downloading process. Once they are done, you will see new folders created for each slot at your Downloaded Data panel on the top left of the window.
	212	+=== **Downloading and Converting Seismic Data to MiniSeed Format** ===
132	132
133		-[[image:1705195543891-334.png||data-xwiki-image-style-alignment="center"]]
	214	+==== **Node Registration and Software Setup** ====
134	134
135		-At this stage, it means that the raw DLL data of the recording has been downloaded successfully to your local machine. To output data in readable format, such as SAC or miniSEED, click the “Tool” menu and select “export seismic data”. The parameters here should be straightforward to set and tailored to personal reference. A list of ANU group preferred parameters can be found at the end of this session. One thing to note is that the “Sample Interval” must be set exactly to this used to reset the nodes. Once you are done with the setting, click “prepare” before “run”. If everything works correctly, you should see the reformatting process from the small panel on the bottom left of this popped up window.
	216	+1. (((
	217	+**Registering Nodes in the System**:
136	136
137		-Now the data should be ready. Then you can select these data and right click to output the GPS information associated with them.
	219	+* To begin, register the nodes in the system so the software can recognize them.
	220	+* Navigate to the installation folder of “SmartSoloApps SoloLite”.
	221	+* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
	222	+* To avoid double registration, replace the file each time you register a new node.
	223	+)))
	224	+1. (((
	225	+**Creating a New Project in SoloLite**:
138	138
139		-[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center"]]
	227	+* Open the “SoloLite” software.
	228	+* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
	229	+* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
	230	+)))
140	140
141		-When downloading, all the green lights on the nodes will blink. The associated red lights on the rack will flash when it is downloading, and make sure to disconnect the nodes before you unplug anything. Be careful: if the laptop goes to sleep, the download process will pause.
	232	+==== **Data Downloading Process** ====
142	142
143		-**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**
	234	+1. (((
	235	+**Initiating Data Download**:
144	144
145		-When downloading, ensure that all metadata is saved along with the file.
	237	+* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
	238	+* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
	239	+* Select all nodes and right-click to “force download”. This starts the download process.
	240	+* Completed downloads will appear as new folders in the Downloaded Data panel.
	241	+)))
	242	+1. (((
	243	+**Exporting Data in Readable Format**:
146	146
147		-Start and endtime: the system will automatically find the earliest time of the data and set that as the starting time. However, you can set the time a day earlier with a sharp start of 00:00:00. In this case, all the outputted data segments will be 24 hours long starting from midnight.
	245	+* Go to the “Tool” menu and select “export seismic data”.
	246	+* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
	247	+* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
	248	+* (% class="box warningmessage" %)
	249	+(((
	250	+* **Ensure to export data as "COUNTS", not "mV".**
148	148
149		-//Once downloaded, mark the "D" box on your temporary labels!//
	252	+* **Set "Remove Gain" to the same decibel gain as during programming (ANU usually sets this to 18 db, but double-check).**
	253	+)))
	254	+)))
150	150
151		-== Converting data ==
	256	+==== **Handling Nodes During Download** ====
152	152
153		-Check the data all have been converted to miniseed correctly
	258	+1. (((
	259	+**Monitoring Download Indicators**:
154	154
155		-– 3 files per station per day
	261	+* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
	262	+* Disconnect nodes properly before unplugging anything.
	263	+* Be cautious: if the laptop enters sleep mode, the download will pause.
	264	+)))
	265	+1. (((
	266	+//**Investment in Storage Hardware**~://
156	156
157		-* Files are the same size (NOTE if having memory issues one or more of the components may have 0-1 kb)
158		-* ~~ 5 Gb / node / month
	268	+* (% class="box warningmessage" %)
	269	+(((
	270	+* **Use fast external hard drives to avoid limitations in data harvesting.**
159	159
160		-//Tick ‘R’ box on the node label//
	272	+* **Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.**
	273	+)))
	274	+)))
	275	+1. (((
	276	+**Metadata and Time Settings**:
161	161
	278	+* Ensure all metadata is saved with the file.
	279	+* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
	280	+)))
	281	+1. (((
	282	+**Finalizing the Download**:
162	162
163		-== Cleaning ==
	284	+* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
164	164
165		-If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
166		-
167	167
168	168	)))
169	169
	289	+[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
170	170
	291	+
	292	+
	293	+[[Caption>>image:1705195543887-977.png||data-xwiki-image-style-alignment="center" height="534" width="632"]]
	294	+
	295	+
	296	+
	297	+
	298	+[[Caption>>image:1705195543890-537.png||data-xwiki-image-style-alignment="center" height="397" width="665"]]
	299	+
	300	+
	301	+
	302	+[[Caption>>image:1705195543891-334.png||data-xwiki-image-style-alignment="center" height="379" width="650"]]
	303	+
	304	+
	305	+
	306	+[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center" height="467" width="674"]]
	307	+
	308	+----
	309	+
	310	+=== **Cleaning** ===
	311	+
	312	+**Procedure for Seismic Nodes:**
	313	+
	314	+* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
	315	+
	316	+= =
	317	+)))
	318	+
171	171	(% class="col-xs-12 col-sm-4" %)
172	172	(((
173		-{{box title="**Contents**"}}
174		-{{toc/}}
175		-{{/box}}
	321	+(% class="box" %)
	322	+(((
	323	+**Contents**
176	176
177		-{{box title="= SmartSolo [[BD3C-5>>https://smartsolo.com/cp-4.html]] =
	325	+(% class="wikitoc" %)
	326	+* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]
	327	+** [[Sub-paragraph>>path:#HSub-paragraph]]
	328	+** [[ >>path:#H]]
	329	+* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]
	330	+** [[GPS Considerations>>path:#HGPSConsiderations]]
	331	+* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]
	332	+* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]
	333	+* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]
	334	+** [[Install>>path:#HInstall]]
	335	+** [[Removing/Demob>>path:#HRemoving2FDemob]]
	336	+** [[Charging>>path:#HCharging]]
	337	+** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]
	338	+** [[Converting data>>path:#HConvertingdata]]
	339	+** [[Cleaning>>path:#HCleaning]]
	340	+)))
178	178
179		-= [[image:Trillium compact posthole.jpg]] =
180	180
181		-|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)5 seconds
182		-|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
183		-|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
184		-|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
185		-
186		-{{/box}}
	343	+(% class="box" %)
	344	+(((
	345	+= SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =
187	187
188		-{{box title="= SmartSolo [[IGU-16HR>>https://smartsolo.com/cp-3.html]] =
	347	+[[image:Smartsolo IGU BD3C 5 (2).jpg]]
189	189
190		-= [[image:Trillium compact posthole.jpg]] =
	349	+[[image:smartsolo.jpg]]
191	191
192		-|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)0.2 seconds (5 Hz)
193		-|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
194		-|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
195		-|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
196		-
197		-{{/box}}
	351	+|(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz
	352	+|(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s
	353	+|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm
	354	+|(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg
	355	+|(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb
	356	+|(% style="width:189px" %)**Battery**|(% style="width:221px" %)Li_etc XXAh
	357	+)))
198	198
	359	+(% class="box" %)
	360	+(((
	361	+= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
199	199
	363	+[[image:smartsolo node.jpg]]
	364	+
	365	+[[image:smartsolo node 2.jpg]]
	366	+
	367	+|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz
	368	+|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s
	369	+|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
	370	+|(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.3 kg
	371	+|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb
	372	+|(% style="width:187px" %)**Battery**|(% style="width:224px" %)Li_etc XXAh
	373	+)))
	374	+
200	200
201	201	)))
202	202	)))

1705196270090-364.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.robert

Size

...	...	@@ -1,0 +1,1 @@
	1	+375.2 KB

Content

1706153266647-145.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.sima

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.7 MB

Content

1706153354750-415.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.sima

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.1 MB

Content

1706153556166-231.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.sima

Size

...	...	@@ -1,0 +1,1 @@
	1	+839.4 KB

Content

Smartsolo IGU BD3C 5 (2).jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.JackD

Size

...	...	@@ -1,0 +1,1 @@
	1	+909.0 KB

Content

Smartsolo IGU BD3C 5.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.JackD

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.7 MB

Content

smartsolo node 2.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.JackD

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.0 MB

Content

smartsolo node.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.JackD

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

smartsolo.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.JackD

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.0 MB

Content