Skip to Content
Last modified by robert on 2025/10/29 10:39
From version 77.1
edited by Jack Dent
on 2025/08/01 16:08
Change comment: There is no comment for this version
To version 85.1
edited by Jack Dent
on 2025/09/29 12:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,12 +10,14 @@
10 10  * **SmartSolo BD3C-5 (5 Second Broadband)**
11 11  * **SmartSolo IGU 16 1C (5 Hz Short Period, single channel)**
12 12  
13 -All have a battery capacity of around 30 days. The programming, operation and downloading procedures for all types of SmartSolo nodes are also similar.
13 +The three-channel nodes have a battery capacity of ~~30 days, whereas the single-channel type has a capacity of ~~50 days. The programming, operation and downloading procedures for all types of SmartSolo nodes are also similar.
14 14  
15 15  ----
16 16  
17 17  = **Programming Defaults** =
18 18  
19 +SmartSolo provides the following powerpoint for SmartSolo node programming and operation. Note that ANSIR only uses a portion of their process for our own uses: [[https:~~/~~/nappe.wustl.edu/smartsolo/files/smartsolo_online_training.pdf>>https://nappe.wustl.edu/smartsolo/files/smartsolo_online_training.pdf]]
20 +
19 19  The nodes must be programmed in the SoloLite software prior to use. Screenshots for the short period 16HR-3C and broadband BDC3-5 are shown with our recommended parameters.
20 20  
21 21  [[IGU-16 3C (short period node) programming screen set at 250 Hz. Ensure that the highlighted areas are set!>>image:SP_programming.labels.png||alt="IGU-16 3C programming screen"]]
... ... @@ -44,6 +44,18 @@
44 44  **Note that any applied instrument gain must be removed when exporting (e.g. to miniseed) after your deploy, **otherwise amplitudes will be a factor of either 15.84893192 (24db) or 2 (6db) too high!
45 45  {{/info}}
46 46  
49 +=== **Programming tips**: ===
50 +
51 +Connecting SmartSolo nodes to their harvesters and having SoloLite recognise them can be a bit tricky, here are some tricks to help register and program them easier:
52 +
53 + - Place the node on the harvester gently, then firmly press it down onto the pins
54 +
55 + - Place all nodes onto the harvester before trying any troubleshooting, as they may not show up while the SoloLite software is running. Once all are connected, try  restarting the software for them to be recognised.
56 +
57 + - If a node is refusing to connect, try it with another slot. It is easiest if you place all 16 nodes on the harvester, and swap any nodes that refuse to connect with eachother
58 +
59 + - Nodes will likely not show up in the order that they should, though this is not an issue. Eg, a node in slot 6 on the harvester may show up in port 13 in the SoloLite software
60 +
47 47  = **Fieldwork Preparation** =
48 48  
49 49  (% class="box warningmessage" %)
... ... @@ -280,6 +280,10 @@
280 280  )))
281 281  )))
282 282  
297 +== Smart Solo Z Polarity bug ==
298 +
299 +See [[https:~~/~~/auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodeZPolaritybug>>https://auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodeZPolaritybug]] for discussion. If data is headed to AusPass, we prefer to invert the IGU-16HR 3 Z channel data manually rather than invert the response metadata. The BD3C-5 data does not require a polarity inversion.
300 +
283 283  == Handling Nodes During Download ==
284 284  
285 285  1. (((
... ... @@ -375,7 +375,7 @@
375 375  
376 376  |(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz
377 377  |(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s
378 -|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm
396 +|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)Φ158 x160mm(H)
379 379  |(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg
380 380  |(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb
381 381  |(% style="width:189px" %)**Battery**|(% style="width:221px" %)(((
... ... @@ -394,8 +394,8 @@
394 394  [[image:smartsolo node 2.jpg]]
395 395  
396 396  |(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz
397 -|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s
398 -|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
415 +|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)76.7 V/m/s
416 +|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm(H)
399 399  |(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.4 kg
400 400  |(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb
401 401  |(% style="width:187px" %)**Battery**|(% style="width:224px" %)(((
... ... @@ -407,6 +407,27 @@
407 407  
408 408  (% class="box" %)
409 409  (((
428 +
429 +
430 += SmartSolo [[IGU-16>>url:https://smartsolo.com/cp-3.html]]1C =
431 +
432 +
433 +[[image:Screenshot 2025-08-01 161027.png]]
434 +
435 +|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 413Hz
436 +|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)80 V/m/s
437 +|(% style="width:187px" %)**Size (without spike)**|(% style="width:224px" %)95mm(L) × 103mm(W) × 118mm(H)
438 +|(% style="width:187px" %)**Weight**|(% style="width:224px" %)1.1 kg
439 +|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)8 Gb
440 +|(% style="width:187px" %)**Battery**|(% style="width:224px" %)(((
441 +Lithium-ion battery contained in equipment (38.48 Wh)
442 +
443 +UN3481 PI967 S2
444 +)))
445 +)))
446 +
447 +(% class="box" %)
448 +(((
410 410  = SmartSolo BD3C-16 Portable Battery Charger =
411 411  
412 412  [[image:20250729_125049.jpg]]
Screenshot 2025-08-01 161027.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +82.8 KB
Content