Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 75.2
edited by robert
on 2025/07/31 20:10
Change comment: There is no comment for this version
To version 75.1
edited by robert
on 2025/07/31 20:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,8 +23,6 @@
23 23  
24 24  FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
25 25  
26 -Note that the samplerate is instead given in sample spacing, in milliseconds. 4 ms = 250 Hz, 1 ms = 1000 Hz, 10 ms = 100 Hz, ad nauseam.
27 -
28 28  Be sure to set the channel types to Seismic and the gain appropriately. For active source (i.e. explosions) you can leave the gain at 0, but for passive experiments some gain is purported to be helpful (although we have found this to be somewhat negligible). We can confirm that 6db for the broadband nodes and 24db for the short period works well.
29 29  
30 30  If you want recording to begin immediately, ensure that begin date is in the past by at least a few days. If you prefer to have a timed turn-on, then set the times as needed. **Be warned that recording will not begin until a GPS lock is achieved, so if you set it to a future turn-on but bury it too deeply, it may not record!**
... ... @@ -336,7 +336,7 @@
336 336  
337 337  = **Cleaning** =
338 338  
339 -When still connected, the nodes are water resistant (don't submerge them!) and can handle a good spray / wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
337 +When still connected, the nodes are water resistant (don't submerge them!) and can handle a good spray / wipedown. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
340 340  
341 341  = **Weights (for shipping)** =
342 342  
... ... @@ -435,7 +435,7 @@
435 435  (((
436 436  = SmartSolo IGU-16 Portable Battery Charger =
437 437  
438 -[[image:20250729_124644.jpg]]
436 += [[image:20250729_124644.jpg]] =
439 439  
440 440  |**Dimensions (LxHxW)**|625 x 500 x 366mm
441 441  |**Input rating**|100-210V - 50/60Hz
... ... @@ -446,7 +446,7 @@
446 446  
447 447  (% class="box" %)
448 448  (((
449 -= SmartSolo BD3C-5 Carry Case =
447 += SmartSolo BD3C-5 Carry Bag =
450 450  
451 451  [[image:20250729_124957.jpg]]
452 452