Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 63.1
edited by santi
on 2025/07/23 15:07
Change comment: There is no comment for this version
To version 74.2
edited by robert
on 2025/07/31 19:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.santi
1 +XWiki.robert
Content
... ... @@ -15,8 +15,24 @@
15 15  
16 16  = **Programming Defaults** =
17 17  
18 -We recommend that the SP 16HR-3C be set to a gain of 24db and no higher than 250 Hz sampling rate unless there is an explicit reason to do so. The BD3C-5 should be set to a gain of 6db (which is the maximum allowed). These are what we use for our internal experiments.
18 +The nodes must be programmed in the SoloLite software prior to use. Screenshots for the short period 16HR-3C and broadband BDC3-5 are shown with our recommended parameters.
19 19  
20 +[[IGU-16 3C (short period node) programming screen set at 250 Hz. Ensure that the highlighted areas are set!>>image:SP_programming.labels.png||alt="IGU-16 3C programming screen"]]
21 +
22 +[[BD3C-5 (broadband node) programming screen set at 250 hz. Ensure that the highlighted areas are set!>>image:BB_programming.labels.png||alt="BD3C-5 programming screen"]]
23 +
24 +FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
25 +
26 +Be sure to set the channel types to Seismic and the gain appropriately. For active source (i.e. explosions) you can leave the gain at 0, but for passive experiments some gain is purported to be helpful (although we have found this to be somewhat negligible). We can confirm that 6db for the broadband nodes and 24db for the short period works well.
27 +
28 +In newer versions of the software there is a "power consumption" setting.. we are no sure what this does exactly, but the manual says it gives life a "boost" at the expense of about 3 db of resolution. Until this can be quantified a bit better it is not recommended.
29 +
30 +Storage type can be DLD (proprietary) or Miniseed. We assume the software works best with their proprietary format so prefer not to risk any issues. You can output to miniseed later.
31 +
32 +GPS mode is best in cycle mode (e.g. once per hour) instead of constant. The clock drift on these are almost nil even if there is no sync at all, so it's best to conserve power.
33 +
34 +We recommend that the SP 16HR-3C be set to a gain of 24db for passive experiments and no higher than 250 Hz sampling rate unless there is an explicit reason to do so. The BD3C-5 should be set to a gain of 6db (which is the maximum allowed) for passive experiments (or 0 db if active).
35 +
20 20  **Note that this gain must be removed when exporting to miniseed, **otherwise amplitudes will be a factor of either 15.84893192 (24db) or 2 (6db) too high. We also recommend disabling bluetooth to increase battery life, and to enable "FIFO" mode just in case old data is still present on the units and you run out of space (although it is unlikely you will go over 64 Gb for one deploy). If using the "timed turn-on" option, please be aware that **the units will not begin recording until they have acquired a GPS lock**, which may nor occur if they are buried too deeply or have very poor sky view.
21 21  
22 22  = **Fieldwork Preparation** =
... ... @@ -45,7 +45,7 @@
45 45  **Field logs are a critical component of fieldwork and this is especially the case for large N nodal deploys. Take notes!**
46 46  )))
47 47  
48 -== 1. Logbook documentation ~*~** TODO ADD LOGBOOK FORMS ==
64 +== 1. Logbook documentation ==
49 49  
50 50  (((
51 51  **Essential Details** for field logs:
... ... @@ -57,6 +57,8 @@
57 57  * Serial number (SN) of the TOP HALF of the sensor (if a BD3C-5, there is only one serial number)
58 58  * Detailed notes on the site conditions and setup, anything else that will be helpful to find it again ("by the fence", "south of rock", etc)
59 59  
76 +[[HERE>>http://auspass.edu.au/field/NODES_blank_fieldlog.pdf]] is an example logsheet that works well for nodes, feel free to print and use!
77 +
60 60  == 2. Node Placement ==
61 61  )))
62 62  
... ... @@ -360,7 +360,7 @@
360 360  
361 361  (% class="box" %)
362 362  (((
363 -= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
381 += SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]]3C =
364 364  
365 365  [[image:smartsolo node.jpg]]
366 366  
... ... @@ -378,6 +378,78 @@
378 378  )))
379 379  )))
380 380  
381 -
399 +(% class="box" %)
400 +(((
401 += SmartSolo BD3C-16 Portable Battery Charger =
402 +
403 +[[image:20250729_125049.jpg]]
404 +
405 +|**Dimensions (LxHxW)**|558 x 357 x 300mm
406 +|**Input rating**|100-210V - 50/60Hz
407 +|**Power**|1000W
408 +|**Weight**|14.5kg
409 +|**Weight with cables**|21kg
382 382  )))
411 +
412 +(% class="box" id="HSmartSoloBD3C-16PortableBatteryCharger" %)
413 +(((
414 += SmartSolo IGU-16 Portable Data Harvester =
415 +
416 +[[image:20250729_124747.jpg]]
417 +
418 +|**Dimensions (LxHxW)**|625 x 500 x 366mm
419 +|**Input rating**|100-210V - 50/60Hz
420 +|**Power**|100W
421 +|**Weight**|21.5 - 24kg
422 +|**Slots no.**|16
423 +|**Download Speed**|20MB/sec/slot
383 383  )))
425 +
426 +(% class="box" %)
427 +(((
428 += SmartSolo IGU-16 Portable Battery Charger =
429 +
430 += [[image:20250729_124644.jpg]] =
431 +
432 +|**Dimensions (LxHxW)**|625 x 500 x 366mm
433 +|**Input rating**|100-210V - 50/60Hz
434 +|**Power**|640W
435 +|**Weight**|26.3kg
436 +|**Slots no.**|16
437 +)))
438 +
439 +(% class="box" %)
440 +(((
441 += SmartSolo BD3C-5 Carry Bag =
442 +
443 +[[image:20250729_124957.jpg]]
444 +
445 +
446 +|**Dimensions (LxHxW)**|590 x 225 x 405mm
447 +|**Weight**|8.2kg
448 +|**Slots no.**|6
449 +)))
450 +
451 +(% class="box" %)
452 +(((
453 += SmartSolo IGU-16 3C Carry Bag =
454 +
455 +[[image:20250729_124502.jpg]]
456 +
457 +|**Dimensions (LxHxW)**|230 x 340 x 310mm
458 +|**Weight**|3.6kg
459 +|**Slots no.**|6
460 +)))
461 +
462 +(% class="box" %)
463 +(((
464 += SmartSolo IGU-16 1C Carry Bag =
465 +
466 +[[image:20250729_124558.jpg]]
467 +
468 +|**Dimensions (LxHxW)**|225 x 200 x 550mm
469 +|**Weight**|
470 +|**Slots no.**|6
471 +)))
472 +)))
473 +)))
20250729_124502.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +318.3 KB
Content
20250729_124558.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +376.8 KB
Content
20250729_124644.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +528.0 KB
Content
20250729_124747.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +488.5 KB
Content
20250729_124957.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +532.5 KB
Content
20250729_125049.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +457.6 KB
Content
BB_programming.labels.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +111.5 KB
Content
SP_programming.labels.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +106.7 KB
Content