Skip to Content
Last modified by robert on 2025/07/16 16:40
From version 60.4
edited by robert
on 2025/07/16 16:17
Change comment: There is no comment for this version
To version 60.2
edited by robert
on 2025/07/16 16:08
Change comment: Deleted object

Summary

Details

Page properties
Content
... ... @@ -45,7 +45,7 @@
45 45  
46 46  = **Installation** =
47 47  
48 -== 1. Logbook documentation ==
48 +== **1. Logbook documentation** ==
49 49  
50 50  (((
51 51  **Essential Details**: Record the following in a logbook:
... ... @@ -57,7 +57,7 @@
57 57  * Serial number (SN) of the sensor
58 58  * Detailed notes on the site conditions and setup
59 59  
60 -== 2. Node Placement ==
60 +== **2. Node Placement** ==
61 61  )))
62 62  
63 63  **Protection**: Place nodes inside (landfill) biodegradable bags to minimize cleaning and cross-site soil contamination.
... ... @@ -68,12 +68,12 @@
68 68  * Take multiple photographs from various angles to document the site setup thoroughly.
69 69  * Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
70 70  
71 -== 3. GPS Considerations ==
71 +== **3. GPS Considerations** ==
72 72  
73 73  (% class="wikigeneratedid" %)
74 74  The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. **These nodes will not start recording without attaining a GPS lock** and repeated attempts will excessively drain the battery.
75 75  
76 -== 4. Visibility and Location Marking ==
76 +== **4. Visibility and Location Marking** ==
77 77  
78 78  **Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
79 79  
... ... @@ -82,7 +82,7 @@
82 82  * Use a GPS device to mark the instrument's exact location.
83 83  * Record this location in both your paper notes and the GPS device.
84 84  
85 -== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)5. Charge Time, Pre-Deployment & Post-Deployment(%%) ==
85 +== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5. Charge Time, Pre-Deployment & Post-Deployment**(%%) ==
86 86  
87 87  * **Charging Duration**: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
88 88  * **Pre-Deployment Charging**:
... ... @@ -96,10 +96,10 @@
96 96  * **Storage and Shipping Charge Level**:
97 97  ** Maintain a battery charge level of around 50-60% (e.g. "orange") for both storage and shipping purposes.
98 98  ** This charge level is recommended to prevent battery damage and is safe for transportation.
99 -** Nodes should not be stored fully charged, and **they should especially not be stored with 0 charge as this damages lithium batteries.**
99 +** Nodes should not be stored fully charged, and it **they should especially not be stored with 0 charge.**
100 100  
101 101  (((
102 -== 6. Data Sharing and Metadata Creation ==
102 +== **6. Data Sharing and Metadata Creation** ==
103 103  )))
104 104  
105 105  **GPS Data**:
... ... @@ -112,9 +112,9 @@
112 112  
113 113  **Metadata File**:
114 114  
115 -* Create and organize metadata according to the [[ANU metadata standard txt file>>attach:example_metadata.txt]]. This is going to be particularly important if you are reusing nodes at different sites... not documenting the serial numbers (of the **top half** of the node) and the times they were deployed can lead to station mix-ups.
115 +* Create and organize metadata according to the [[ANU metadata standard txt file>>attach:example_metadata.txt]].
116 116  
117 -== 7. Additional Best Practices ==
117 +== **7. Additional Best Practices** ==
118 118  
119 119  * **Training and Familiarisation**: Make sure all team members are adequately trained in using the GPS devices, compass use, and other equipment to ensure consistent and accurate data collection.
120 120  
... ... @@ -169,25 +169,25 @@
169 169  = **Charging Procedure for Seismic Nodes** =
170 170  
171 171  (((
172 -== 1. Preparation for Charging: ==
172 +== **1. Preparation for Charging**: ==
173 173  
174 174  * Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
175 175  )))
176 176  
177 177  (((
178 -== 2. Disassembling the Node: ==
178 +== **2. Disassembling the Node**: ==
179 179  
180 180  * For the IGU-16HR, remove the battery (bottom half) from the sensor. This is done by unscrewing the spikes counter-clockwise.
181 181  )))
182 182  
183 183  (((
184 -== 3. Setting Nodes in the Charging Box: ==
184 +== **3. Setting Nodes in the Charging Box**: ==
185 185  
186 186  * Place 1-16 IGU-16HR battery components upside-down into the charger, assuring they are oriented properly.
187 187  )))
188 188  
189 189  (((
190 -== 4. Monitoring the Charging Process: ==
190 +== **4. Monitoring the Charging Process**: ==
191 191  
192 192  * Once the nodes are set in the charging box and the charging process begins, lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
193 193  * Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged. For storage, the goal is to charge them to ORANGE.
... ... @@ -194,7 +194,7 @@
194 194  )))
195 195  
196 196  (((
197 -== 5. Updating Charge Status: ==
197 +== **5. Updating Charge Status**: ==
198 198  
199 199  * During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
200 200  * This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
... ... @@ -211,7 +211,7 @@
211 211  
212 212  = **Downloading and Converting Seismic Data to MiniSeed Format** =
213 213  
214 -== Node Registration and Software Setup ==
214 +== **Node Registration and Software Setup** ==
215 215  
216 216  1. (((
217 217  **Registering Nodes in the System**:
... ... @@ -229,7 +229,7 @@
229 229  * Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
230 230  )))
231 231  
232 -== Data Downloading Process ==
232 +== **Data Downloading Process** ==
233 233  
234 234  1. (((
235 235  **Initiating Data Download**:
... ... @@ -253,7 +253,7 @@
253 253  )))
254 254  )))
255 255  
256 -== Handling Nodes During Download ==
256 +== **Handling Nodes During Download** ==
257 257  
258 258  1. (((
259 259  **Monitoring Download Indicators**: