Skip to Content
Last modified by robert on 2025/06/16 07:51
From version 45.1
edited by robert
on 2024/05/15 09:47
Change comment: There is no comment for this version
To version 46.1
edited by robert
on 2024/05/15 21:20
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -33,7 +33,7 @@
33 33  
34 34  = **Installation** =
35 35  
36 -== **1- Logbook documentation** ==
36 +== **1. Logbook documentation** ==
37 37  
38 38  (((
39 39  **Essential Details**: Record the following in a logbook:
... ... @@ -45,7 +45,7 @@
45 45  * Serial number (SN) of the sensor
46 46  * Detailed notes on the site conditions and setup
47 47  
48 -== **2- Node Placement** ==
48 +== **2. Node Placement** ==
49 49  )))
50 50  
51 51  **Protection**: Place nodes inside (landfill) biodegradable bags to minimize cleaning and cross-site soil contamination.
... ... @@ -56,12 +56,12 @@
56 56  * Take multiple photographs from various angles to document the site setup thoroughly.
57 57  * Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
58 58  
59 -== **3- GPS Considerations** ==
59 +== **3. GPS Considerations** ==
60 60  
61 61  (% class="wikigeneratedid" %)
62 62  The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. **These nodes will not start recording without attaining a GPS lock** and repeated attempts will excessively drain the battery.
63 63  
64 -== **4- Visibility and Location Marking** ==
64 +== **4. Visibility and Location Marking** ==
65 65  
66 66  **Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
67 67  
... ... @@ -70,7 +70,7 @@
70 70  * Use a GPS device to mark the instrument's exact location.
71 71  * Record this location in both your paper notes and the GPS device.
72 72  
73 -== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5- Charge Time, Pre-Deployment & Post-Deployment**(%%) ==
73 +== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5. Charge Time, Pre-Deployment & Post-Deployment**(%%) ==
74 74  
75 75  * **Charging Duration**: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
76 76  * **Pre-Deployment Charging**:
... ... @@ -205,9 +205,9 @@
205 205  
206 206  ----
207 207  
208 -=== **Downloading and Converting Seismic Data to MiniSeed Format** ===
208 += **Downloading and Converting Seismic Data to MiniSeed Format** =
209 209  
210 -==== **Node Registration and Software Setup** ====
210 +== **Node Registration and Software Setup** ==
211 211  
212 212  1. (((
213 213  **Registering Nodes in the System**:
... ... @@ -225,7 +225,7 @@
225 225  * Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
226 226  )))
227 227  
228 -==== **Data Downloading Process** ====
228 +== **Data Downloading Process** ==
229 229  
230 230  1. (((
231 231  **Initiating Data Download**:
... ... @@ -249,7 +249,7 @@
249 249  )))
250 250  )))
251 251  
252 -==== **Handling Nodes During Download** ====
252 +== **Handling Nodes During Download** ==
253 253  
254 254  1. (((
255 255  **Monitoring Download Indicators**:
... ... @@ -303,7 +303,7 @@
303 303  
304 304  ----
305 305  
306 -=== **Cleaning** ===
306 += **Cleaning** =
307 307  
308 308  **Procedure for Seismic Nodes:**
309 309