Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 42.1
edited by robert
on 2024/03/06 13:19
Change comment: There is no comment for this version
To version 7.1
edited by robert
on 2024/01/14 12:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,376 +2,150 @@
2 2  (((
3 3  (% class="col-xs-12 col-sm-8" %)
4 4  (((
5 -= **SmartSolo Node Types and Procedures** =
5 += SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
6 6  
7 -**SmartSolo Node Variants:**
7 +blahblah
8 8  
9 -* **SmartSolo IGU 16HR 3C (5 Hz) Short Period Node**
10 -* **SmartSolo BD3C-5 (5-second) Broad-Band Node**
9 +== Sub-paragraph ==
11 11  
12 -The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
13 13  
14 -This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
12 +== ==
15 15  
16 -----
17 17  
18 -= **Node Setup** =
15 += Smart Solo BD3C-5 (5 second) Broad-Band Node =
19 19  
20 -Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
17 +Lorem
21 21  
22 22  
23 -~*~**this needs to be reformatted
20 +== GPS Considerations ==
24 24  
25 -== **Pre-Fieldwork Preparation** ==
26 -
27 -(% class="box infomessage" %)
28 -(((
29 -(% class="box warningmessage" %)
30 -(((
31 -**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**
32 -
33 -**Plan on 1 Tb to store ALL data for 50 nodes @ 250 Hz and a single ~~30 day occupation**
34 -)))
35 -)))
36 -
37 -= **Installation** =
38 -
39 -=== **1- Logbook documentation** ===
40 -
41 -(((
42 -**Essential Details**: Record the following in a logbook:
43 -
44 -* Station name
45 -* Latitude and longitude
46 -* Names of team members present
47 -* Date and local time of installation
48 -* Serial number (SN) of the sensor
49 -* Detailed notes on the site conditions and setup
50 -
51 -=== **2- Node Placement** ===
52 -)))
53 -
54 -**Protection**: Place nodes inside thick, landfill biodegradable plastic bags for environmental protection.
55 -
56 -**Site Analysis**:
57 -
58 -* Conduct compass measurements away from the node and metallic structures, adjusting for inclination angle.
59 -* Take multiple photographs from various angles to document the site setup thoroughly.
60 -* Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
61 -
62 -=== **3- GPS Considerations** ===
63 -
64 -(% class="wikigeneratedid" %)
65 65  The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
66 66  
67 -=== **4- Visibility and Location Marking** ===
24 +== Keeping the Instruments Clean ==
68 68  
69 -**Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
26 +Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
70 70  
71 -**GPS Marking**:
72 72  
73 -* Use a GPS device to mark the instrument's exact location.
74 -* Record this location in both your paper notes and the GPS device.
29 += Charge Time, Instrument Life, and Charge During Storage & Shipping =
75 75  
76 -=== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5- Charge Time, Pre-Deployment & Post-Deployment**(%%) ===
31 +Both nodes take about 6-8 hours to charge from flat and hold their charge reasonably well, however you may benefit from a "top up" charge immediately prior to deploy. The instruments should last around 30 days per cycle (recording at 250hz) with GPS on cycle on and bluetooth disabled.
77 77  
78 -* **Charging Duration**: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
79 -* **Pre-Deployment Charging**:
80 -** Although the nodes hold their charge well, it's beneficial to give them a "top up" charge right before deployment.
33 +Upon retrieval, the instruments should not be stored flat as this will damage the batteries. It is recommended to charge them back up "to orange" such that they are charged around ~~50-60%. This is also acceptable for shipping.
81 81  
82 -* **Operational Duration**:
83 -** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle.
84 84  
85 -* **Post-Retrieval Charging**:
86 -** Do not store the instruments with completely drained batteries.
87 -** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) for optimal battery health.
36 += Best Practices and Guide =
88 88  
89 -* **Storage and Shipping Charge Level**:
90 -** Maintain a battery charge level of around 50-60% for both storage and shipping purposes.
91 -** This charge level is recommended to prevent battery damage and is safe for transportation.
38 +== Install ==
92 92  
93 -=== ===
40 +Logbook is required (used again for pick up & metadata creation)
94 94  
95 -* (((
96 -=== **6- Data Sharing and Metadata Creation** ===
97 -)))
42 +- station name
98 98  
99 -**GPS Data**:
44 +- lat / long
100 100  
101 -* Download the GPS file to a laptop.
102 -* Share this file on a drive accessible to all team members for uniform understanding of node locations.
46 +- team members
103 103  
104 -**Photo Sharing**:
48 +- date and local time
105 105  
106 -* Upload site photos to a shared platform (OneDrive, Dropbox, etc.).
107 -* Integrating photos into Google Maps or Google Earth can be particularly beneficial for easy location referencing.
50 +- SN of sensor
108 108  
109 -**Metadata File**:
52 +- notes on site
110 110  
111 -* Create a metadata XML file for each node, which is essential for data organisation and future reference.
54 +Place nodes in thick (“landfill biodegradable”) plastic bags in the hole
112 112  
113 -=== **7- Additional Best Practices** ===
56 +Take compass measurement away from node and fences [make sure to adjust inclination angle]
114 114  
115 -* **Environmental Responsibility**: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.
116 -* **Training and Familiarisation**: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.
58 +Take many photos from the site from different angles 
117 117  
118 -* (((
119 -==== **Keeping the Instruments Clean** ====
120 -)))
121 -* (((
122 -Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
123 -)))
60 +Add a precise site description to the notes such as distances and orientations from landmarks 
124 124  
125 -----
62 +It will be very helpful in locating the instrument if you place a flag next to it, preferably in a color other than green or yellow.
126 126  
127 -=== **Seismic Station Demobilization and Documentation** ===
64 +Make a mark (digital) of the instrument's location using a GPS device. Record the location both in your paper notes and on the GPS device.
128 128  
129 -1. (((
130 -**Preparation for Demobilization**:
66 +Download the GPS (Garmin) file to a laptop and share drive to share with other GPS devices
131 131  
132 -* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
133 -)))
134 -1. (((
135 -**Locating the instrument**:
68 +Share photos in a shared location (Google photos, OneDrive, Dropbox, etc), but most useful are those added to a Google Maps/Earth location
136 136  
137 -* Use the downloaded GPS file to accurately locate the node for demobilization.
138 -* Import this KMZ file onto your phone for easy reference and location tracking.
139 -* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
140 -)))
141 -1. (((
142 -**Labeling Instruments for Demobilization**:
70 +Create metadata .xml file
143 143  
144 -* Write the station name and the instrument’s serial number on a label.
145 -* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
146 -* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
147 -)))
148 -1. (((
149 -**Photographing the Setup Node**:
150 150  
151 -* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
152 -* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
153 -)))
154 -1. (((
155 -**Logging Demobilization Details**:
73 +== Removing/Demob ==
156 156  
157 -* Use the field logbook to note the time of demobilization, serial numbers, and station name.
158 -* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
159 -)))
160 -1. (((
161 -**Final Checks and Equipment Removal**:
75 +Download and then use the GPS file to locate the node 
162 162  
163 -* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
164 -* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
77 +Use Google Maps / Google Earth to create a kmz file that can then be imported onto your phone.  
165 165  
166 -
167 -)))
168 168  
169 -[[image:1706153556166-231.jpeg||data-xwiki-image-style-alignment="center" height="345" width="460"]]
80 +Upload photos of the site
170 170  
171 -----
82 +- station name
172 172  
173 -=== **Charging Procedure for Seismic Nodes** ===
84 +- latitude
174 174  
175 -1. (((
176 -**Preparation for Charging**:
86 +- longitude
177 177  
178 -* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
179 -)))
180 -1. (((
181 -**Disassembling the Node**:
88 +- elevation
182 182  
183 -* Carefully remove the battery and the spike from the sensor. This is typically done by twisting the spike part of the instrument to release these components.
184 -)))
185 -1. (((
186 -**Setting Nodes in the Charging Box**:
90 +* SN of sensor – SN of battery (optional)
91 +* Site notes and name of location (e.g. Richards garden, Te Mini steam field eastern side)
187 187  
188 -* Place up to 16 nodes into the charging box, arranging them with the spikes pointing upwards. This configuration is essential for proper connection and efficient charging.
189 -)))
190 -1. (((
191 -**Monitoring the Charging Process**:
93 +Upload photos into Google Earth and on a shared drive
192 192  
193 -* Once the nodes are set in the charging box and the charging process begins, red lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
194 -* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged.
195 -)))
196 -1. (((
197 -**Updating Charge Status**:
95 +Before removing the instrument have your compass, tape, marker, pen, clipboard, logbook and compass ready (in tote bag!). 
198 198  
199 -* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
200 -* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
201 -)))
97 +Write the station name and the instrument’s serial number, along with 'D' and 'C' and ‘R’, each next to a box to indicate 'download' and 'charge'. Stick this label to the top of the instrument.
202 202  
203 -[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center" height="299" width="530"]]
99 +Take a photo of the entire setup node with the label on it + compass 
204 204  
101 +Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else
205 205  
206 206  
104 +== Charging ==
207 207  
208 -[[image:1706153354750-415.png||data-xwiki-image-style-alignment="center" height="317" width="562"]]
106 +Clean node prior to charging and harvesting the data
209 209  
210 -----
108 +Remove battery (and spike) from the sensor by twisting the spike part of the instrument
211 211  
212 -=== **Downloading and Converting Seismic Data to MiniSeed Format** ===
110 +Set 16 nodes into the charging box (spikes up)
213 213  
214 -==== **Node Registration and Software Setup** ====
112 +Red lights on the box next to the batteries will come on and remain a steady red light while charging. This will change to orange, then to green, then to flashing green when fully charged.
215 215  
216 -1. (((
217 -**Registering Nodes in the System**:
114 +This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
218 218  
219 -* To begin, register the nodes in the system so the software can recognize them.
220 -* Navigate to the installation folder of “SmartSoloApps SoloLite”.
221 -* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
222 -* To avoid double registration, replace the file each time you register a new node.
223 -)))
224 -1. (((
225 -**Creating a New Project in SoloLite**:
226 -
227 -* Open the “SoloLite” software.
228 -* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
229 -* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
230 -)))
231 -
232 -==== **Data Downloading Process** ====
233 -
234 -1. (((
235 -**Initiating Data Download**:
236 -
237 -* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
238 -* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
239 -* Select all nodes and right-click to “force download”. This starts the download process.
240 -* Completed downloads will appear as new folders in the Downloaded Data panel.
241 -)))
242 -1. (((
243 -**Exporting Data in Readable Format**:
244 -
245 -* Go to the “Tool” menu and select “export seismic data”.
246 -* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
247 -* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
248 -* (% class="box warningmessage" %)
249 -(((
250 -* **Ensure to export data as "COUNTS", not "mV".**
251 -
252 -* **Set "Remove Gain" to the same decibel gain as during programming** **(by default ANU sets this to 24db (a factor of 15.848932).**
253 -)))
254 -)))
255 -
256 -==== **Handling Nodes During Download** ====
257 -
258 -1. (((
259 -**Monitoring Download Indicators**:
260 -
261 -* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
262 -* Disconnect nodes properly before unplugging anything.
263 -* Be cautious: if the laptop enters sleep mode, the download will pause.
264 -)))
265 -1. (((
266 -//**Investment in Storage Hardware**~://
267 -
268 -* (% class="box warningmessage" %)
269 -(((
270 -* **Use fast external hard drives to avoid limitations in data harvesting.**
271 -
272 -* **Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.**
273 -)))
274 -)))
275 -1. (((
276 -**Metadata and Time Settings**:
277 -
278 -* Ensure all metadata is saved with the file.
279 -* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
280 -)))
281 -1. (((
282 -**Finalizing the Download**:
283 -
284 -* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
285 -
286 286  
287 287  )))
288 288  
289 -[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
290 290  
291 -
292 -
293 -[[Caption>>image:1705195543887-977.png||data-xwiki-image-style-alignment="center" height="534" width="632"]]
294 -
295 -
296 -
297 -
298 -[[Caption>>image:1705195543890-537.png||data-xwiki-image-style-alignment="center" height="397" width="665"]]
299 -
300 -
301 -
302 -[[Caption>>image:1705195543891-334.png||data-xwiki-image-style-alignment="center" height="379" width="650"]]
303 -
304 -
305 -
306 -[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center" height="467" width="674"]]
307 -
308 -----
309 -
310 -=== **Cleaning** ===
311 -
312 -**Procedure for Seismic Nodes:**
313 -
314 -* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
315 -
316 -= =
317 -)))
318 -
319 319  (% class="col-xs-12 col-sm-4" %)
320 320  (((
321 -(% class="box" %)
322 -(((
323 -**Contents**
122 +{{box title="**Contents**"}}
123 +{{toc/}}
124 +{{/box}}
324 324  
325 -(% class="wikitoc" %)
326 -* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]
327 -** [[Sub-paragraph>>path:#HSub-paragraph]]
328 -** [[ >>path:#H]]
329 -* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]
330 -** [[GPS Considerations>>path:#HGPSConsiderations]]
331 -* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]
332 -* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]
333 -* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]
334 -** [[Install>>path:#HInstall]]
335 -** [[Removing/Demob>>path:#HRemoving2FDemob]]
336 -** [[Charging>>path:#HCharging]]
337 -** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]
338 -** [[Converting data>>path:#HConvertingdata]]
339 -** [[Cleaning>>path:#HCleaning]]
340 -)))
126 +{{box title="= SmartSolo [[BD3C-5>>https://smartsolo.com/cp-4.html]] =
341 341  
128 += [[image:Trillium compact posthole.jpg]] =
342 342  
343 -(% class="box" %)
344 -(((
345 -= SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =
130 +|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)5 seconds
131 +|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
132 +|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
133 +|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
134 +
135 +{{/box}}
346 346  
347 -[[image:Smartsolo IGU BD3C 5 (2).jpg]]
137 +{{box title="= SmartSolo [[IGU-16HR>>https://smartsolo.com/cp-3.html]] =
348 348  
349 -[[image:smartsolo.jpg]]
139 += [[image:Trillium compact posthole.jpg]] =
350 350  
351 -|(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz
352 -|(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s
353 -|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm
354 -|(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg
355 -|(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb
356 -|(% style="width:189px" %)**Battery**|(% style="width:221px" %)Li_etc XXAh
357 -)))
141 +|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)0.2 seconds (5 Hz)
142 +|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
143 +|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
144 +|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
145 +
146 +{{/box}}
358 358  
359 -(% class="box" %)
360 -(((
361 -= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
362 362  
363 -[[image:smartsolo node.jpg]]
364 -
365 -[[image:smartsolo node 2.jpg]]
366 -
367 -|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz
368 -|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s
369 -|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
370 -|(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.3 kg
371 -|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb
372 -|(% style="width:187px" %)**Battery**|(% style="width:224px" %)Li_etc XXAh
373 -)))
374 -
375 375  
376 376  )))
377 377  )))
1705195543887-977.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -259.0 KB
Content
1705195543890-537.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -52.4 KB
Content
1705195543891-334.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
1705195543898-365.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -141.1 KB
Content
1705195933422-337.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
1705196270090-364.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -375.2 KB
Content
1706153266647-145.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 MB
Content
1706153354750-415.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 MB
Content
1706153556166-231.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -839.4 KB
Content
Smartsolo IGU BD3C 5 (2).jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -909.0 KB
Content
Smartsolo IGU BD3C 5.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 MB
Content
smartsolo node 2.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.0 MB
Content
smartsolo node.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
smartsolo.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.0 MB
Content