Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 41.1
edited by Sima Mousavi
on 2024/02/05 16:46
Change comment: There is no comment for this version
To version 18.3
edited by Sima Mousavi
on 2024/01/17 15:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,26 +2,10 @@
2 2  (((
3 3  (% class="col-xs-12 col-sm-8" %)
4 4  (((
5 -= **SmartSolo Node Types and Procedures** =
6 -
7 -**SmartSolo Node Variants:**
8 -
9 -* **SmartSolo IGU 16HR 3C (5 Hz) Short Period Node**
10 -* **SmartSolo BD3C-5 (5-second) Broad-Band Node**
11 -
12 -The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
13 -
14 -This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
15 -
16 -----
17 -
18 18  = **Node Setup** =
19 19  
20 -Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
7 +Short term (~~30 day) battery powered nodes
21 21  
22 -
23 -~*~**this needs to be reformatted
24 -
25 25  == **Pre-Fieldwork Preparation** ==
26 26  
27 27  (% class="box infomessage" %)
... ... @@ -28,9 +28,7 @@
28 28  (((
29 29  (% class="box warningmessage" %)
30 30  (((
31 -**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**
32 -
33 -**Plan on 1 Tb to store ALL data for 50 nodes @ 250 Hz and a single ~~30 day occupation**
15 +**~ INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING **
34 34  )))
35 35  )))
36 36  
... ... @@ -48,6 +48,7 @@
48 48  * Serial number (SN) of the sensor
49 49  * Detailed notes on the site conditions and setup
50 50  
33 +
51 51  === **2- Node Placement** ===
52 52  )))
53 53  
... ... @@ -59,13 +59,8 @@
59 59  * Take multiple photographs from various angles to document the site setup thoroughly.
60 60  * Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
61 61  
62 -=== **3- GPS Considerations** ===
45 +=== **3- Visibility and Location Marking** ===
63 63  
64 -(% class="wikigeneratedid" %)
65 -The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
66 -
67 -=== **4- Visibility and Location Marking** ===
68 -
69 69  **Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
70 70  
71 71  **GPS Marking**:
... ... @@ -73,29 +73,8 @@
73 73  * Use a GPS device to mark the instrument's exact location.
74 74  * Record this location in both your paper notes and the GPS device.
75 75  
76 -=== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5- Charge Time, Pre-Deployment & Post-Deployment**(%%) ===
54 +=== **4- Data Sharing and Metadata Creation** ===
77 77  
78 -* **Charging Duration**: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
79 -* **Pre-Deployment Charging**:
80 -** Although the nodes hold their charge well, it's beneficial to give them a "top up" charge right before deployment.
81 -
82 -* **Operational Duration**:
83 -** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle.
84 -
85 -* **Post-Retrieval Charging**:
86 -** Do not store the instruments with completely drained batteries.
87 -** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) for optimal battery health.
88 -
89 -* **Storage and Shipping Charge Level**:
90 -** Maintain a battery charge level of around 50-60% for both storage and shipping purposes.
91 -** This charge level is recommended to prevent battery damage and is safe for transportation.
92 -
93 -=== ===
94 -
95 -* (((
96 -=== **6- Data Sharing and Metadata Creation** ===
97 -)))
98 -
99 99  **GPS Data**:
100 100  
101 101  * Download the GPS file to a laptop.
... ... @@ -110,212 +110,202 @@
110 110  
111 111  * Create a metadata XML file for each node, which is essential for data organisation and future reference.
112 112  
113 -=== **7- Additional Best Practices** ===
70 +=== **5- Additional Best Practices** ===
114 114  
115 115  * **Environmental Responsibility**: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.
116 116  * **Training and Familiarisation**: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.
117 117  
118 -* (((
119 -==== **Keeping the Instruments Clean** ====
120 -)))
121 -* (((
75 += ​​​​​​​ =
76 +
77 += =
78 +
79 += =
80 +
81 += SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
82 +
83 +blahblah
84 +
85 +== Sub-paragraph ==
86 +
87 +
88 +== ==
89 +
90 +
91 += Smart Solo BD3C-5 (5 second) Broad-Band Node =
92 +
93 +Lorem
94 +
95 +[[image:1705196270090-364.png]]
96 +
97 +
98 +== GPS Considerations ==
99 +
100 +The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
101 +
102 += Keeping the Instruments Clean =
103 +
122 122  Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
123 -)))
124 124  
125 -----
126 126  
127 -=== **Seismic Station Demobilization and Documentation** ===
107 += Charge Time, Instrument Life, and Charge During Storage & Shipping =
128 128  
129 -1. (((
130 -**Preparation for Demobilization**:
109 +Both nodes take about 6-8 hours to charge from flat and hold their charge reasonably well, however you may benefit from a "top up" charge immediately prior to deploy. The instruments should last around 30 days per cycle (recording at 250hz) with GPS on cycle on and bluetooth disabled.
131 131  
132 -* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
133 -)))
134 -1. (((
135 -**Locating the instrument**:
111 +Upon retrieval, the instruments should not be stored flat as this will damage the batteries. It is recommended to charge them back up "to orange" such that they are charged around ~~50-60%. This is also acceptable for shipping.
136 136  
137 -* Use the downloaded GPS file to accurately locate the node for demobilization.
138 -* Import this KMZ file onto your phone for easy reference and location tracking.
139 -* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
140 -)))
141 -1. (((
142 -**Labeling Instruments for Demobilization**:
143 143  
144 -* Write the station name and the instrument’s serial number on a label.
145 -* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
146 -* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
147 -)))
148 -1. (((
149 -**Photographing the Setup Node**:
114 += Best Practices and Guide =
150 150  
151 -* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
152 -* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
153 -)))
154 -1. (((
155 -**Logging Demobilization Details**:
116 +== Install ==
156 156  
157 -* Use the field logbook to note the time of demobilization, serial numbers, and station name.
158 -* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
159 -)))
160 -1. (((
161 -**Final Checks and Equipment Removal**:
118 +Logbook is required (used again for pick up & metadata creation)
162 162  
163 -* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
164 -* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
120 +- station name
165 165  
166 -
167 -)))
122 +- lat / long
168 168  
169 -[[image:1706153556166-231.jpeg||data-xwiki-image-style-alignment="center" height="345" width="460"]]
124 +- team members
170 170  
171 -----
126 +- date and local time
172 172  
173 -=== **Charging Procedure for Seismic Nodes** ===
128 +- SN of sensor
174 174  
175 -1. (((
176 -**Preparation for Charging**:
130 +- notes on site
177 177  
178 -* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
179 -)))
180 -1. (((
181 -**Disassembling the Node**:
132 +Place nodes in thick (“landfill biodegradable”) plastic bags in the hole
182 182  
183 -* Carefully remove the battery and the spike from the sensor. This is typically done by twisting the spike part of the instrument to release these components.
184 -)))
185 -1. (((
186 -**Setting Nodes in the Charging Box**:
134 +Take compass measurement away from node and fences [make sure to adjust inclination angle]
187 187  
188 -* Place up to 16 nodes into the charging box, arranging them with the spikes pointing upwards. This configuration is essential for proper connection and efficient charging.
189 -)))
190 -1. (((
191 -**Monitoring the Charging Process**:
136 +Take many photos from the site from different angles 
192 192  
193 -* Once the nodes are set in the charging box and the charging process begins, red lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
194 -* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged.
195 -)))
196 -1. (((
197 -**Updating Charge Status**:
138 +Add a precise site description to the notes such as distances and orientations from landmarks 
198 198  
199 -* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
200 -* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
201 -)))
140 +It will be very helpful in locating the instrument if you place a flag next to it, preferably in a color other than green or yellow.
202 202  
203 -[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center" height="299" width="530"]]
142 +Make a mark (digital) of the instrument's location using a GPS device. Record the location both in your paper notes and on the GPS device.
204 204  
144 +Download the GPS (Garmin) file to a laptop and share drive to share with other GPS devices
205 205  
146 +Share photos in a shared location (Google photos, OneDrive, Dropbox, etc), but most useful are those added to a Google Maps/Earth location
206 206  
148 +Create metadata .xml file
207 207  
208 -[[image:1706153354750-415.png||data-xwiki-image-style-alignment="center" height="317" width="562"]]
209 209  
210 -----
151 +== Removing/Demob ==
211 211  
212 -=== **Downloading and Converting Seismic Data to MiniSeed Format** ===
153 +Download and then use the GPS file to locate the node 
213 213  
214 -==== **Node Registration and Software Setup** ====
155 +Use Google Maps / Google Earth to create a kmz file that can then be imported onto your phone.  
215 215  
216 -1. (((
217 -**Registering Nodes in the System**:
218 218  
219 -* To begin, register the nodes in the system so the software can recognize them.
220 -* Navigate to the installation folder of “SmartSoloApps SoloLite”.
221 -* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
222 -* To avoid double registration, replace the file each time you register a new node.
223 -)))
224 -1. (((
225 -**Creating a New Project in SoloLite**:
158 +Upload photos of the site  
226 226  
227 -* Open the “SoloLite” software.
228 -* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
229 -* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
230 -)))
160 +- station name
231 231  
232 -==== **Data Downloading Process** ====
162 +- latitude
233 233  
234 -1. (((
235 -**Initiating Data Download**:
164 +- longitude
236 236  
237 -* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
238 -* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
239 -* Select all nodes and right-click to “force download”. This starts the download process.
240 -* Completed downloads will appear as new folders in the Downloaded Data panel.
241 -)))
242 -1. (((
243 -**Exporting Data in Readable Format**:
166 +- elevation
244 244  
245 -* Go to the “Tool” menu and select “export seismic data”.
246 -* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
247 -* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
248 -* (% class="box warningmessage" %)
249 -(((
250 -* **Ensure to export data as "COUNTS", not "mV".**
168 +* SN of sensor – SN of battery (optional)
169 +* Site notes and name of location (e.g. Richards garden, Te Mini steam field eastern side) 
251 251  
252 -* **Set "Remove Gain" to the same decibel gain as during programming (ANU usually sets this to 18 db, but double-check).**
253 -)))
254 -)))
171 +Upload photos into Google Earth and on a shared drive
255 255  
256 -==== **Handling Nodes During Download** ====
173 +Before removing the instrument have your compass, tape, marker, pen, clipboard, logbook and compass ready (in tote bag!). 
257 257  
258 -1. (((
259 -**Monitoring Download Indicators**:
175 +Write the station name and the instrument’s serial number, along with 'D' and 'C' and ‘R’, each next to a box to indicate 'download' and 'charge'. Stick this label to the top of the instrument. When dealing with dozens or hundreds of these you WILL start to mix them up after a while! Having an easy visual cue keep them sorted will save you a great deal of confusion later on.
260 260  
261 -* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
262 -* Disconnect nodes properly before unplugging anything.
263 -* Be cautious: if the laptop enters sleep mode, the download will pause.
264 -)))
265 -1. (((
266 -//**Investment in Storage Hardware**~://
177 +Take a photo of the entire setup node with the label on it + compass 
267 267  
268 -* (% class="box warningmessage" %)
269 -(((
270 -* **Use fast external hard drives to avoid limitations in data harvesting.**
179 +Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else
271 271  
272 -* **Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.**
273 -)))
274 -)))
275 -1. (((
276 -**Metadata and Time Settings**:
277 277  
278 -* Ensure all metadata is saved with the file.
279 -* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
280 -)))
281 -1. (((
282 -**Finalizing the Download**:
182 +== Charging ==
283 283  
284 -* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
184 +Clean node prior to charging and harvesting the data
285 285  
286 -
287 -)))
186 +Remove battery (and spike) from the sensor by twisting the spike part of the instrument
288 288  
289 -[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
188 +Set 16 nodes into the charging box (spikes up)
290 290  
190 +Red lights on the box next to the batteries will come on and remain a steady red light while charging. This will change to orange, then to green, then to flashing green when fully charged.
291 291  
192 +This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
292 292  
293 -[[Caption>>image:1705195543887-977.png||data-xwiki-image-style-alignment="center" height="534" width="632"]]
194 +[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
294 294  
295 295  
296 296  
198 +== Downloading and Converting Data to MiniSeed ==
297 297  
298 -[[Caption>>image:1705195543890-537.png||data-xwiki-image-style-alignment="center" height="397" width="665"]]
299 299  
201 +The first thing to do is to register the nodes in the system, so the software can recognize them. To do this, go to the folder where the “SmartSoloApps SoloLite” was installed. Then right-click the deviceconfig.exe program to “run as an administrator” and save the file to the directory of “deviceconfig” (snapshot below). Note that to avoid registering the same node twice, you can simply replace the file each time you do the registration.
300 300  
203 +[[image:1705195543887-977.png]]
301 301  
302 -[[Caption>>image:1705195543891-334.png||data-xwiki-image-style-alignment="center" height="379" width="650"]]
303 303  
206 +Then open the “SoloLite” software, and just go to “File” to make a new project. In this case, you do not need to find the exact 16 nodes that were grouped for script writing. Do not worry about the settings for the seismic recordings for the next window to pop up, as the only way to reset the instruments (e.g., sampling rate, gain etc) is to write script to re-program them.
304 304  
208 +[[image:1705195543890-537.png||data-xwiki-image-style-alignment="center"]]
305 305  
306 -[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center" height="467" width="674"]]
307 307  
308 -----
211 +Once you create the new project, your Data Transfer View panel on the bottom right of the window will show these nodes that have properly connected to the data harvest, including series number, data size etc. It is okay if the “Prospect not matched”, which simply means the project you just created does not match the one you made to program them. Simply select all these nodes, and right click to “force download”, which will initiate the downloading process. Once they are done, you will see new folders created for each slot at your Downloaded Data panel on the top left of the window.
309 309  
310 -=== **Cleaning** ===
213 +[[image:1705195543891-334.png||data-xwiki-image-style-alignment="center"]]
311 311  
312 -**Procedure for Seismic Nodes:**
215 +At this stage, it means that the raw DLL data of the recording has been downloaded successfully to your local machine. To output data in readable format, such as SAC or miniSEED, click the “Tool” menu and select “export seismic data”. The parameters here should be straightforward to set and tailored to personal reference.
313 313  
314 -* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
217 +(% class="box warningmessage" %)
218 +(((
219 +**Please make sure that data is exported as "COUNTS" and NOT "mV"!**
220 +)))
315 315  
316 -= =
222 +(% class="box warningmessage" %)
223 +(((
224 +**Furthermore you must also set "Remove Gain" to the same decibel gain setting that was set during programming! ANU always set this to 18 db (double check) for all types of nodes.**
317 317  )))
318 318  
227 +A list of ANU group preferred parameters can be found at the end of this session. One thing to note is that the “Sample Interval” must be set exactly to this used to reset the nodes. Once you are done with the setting, click “prepare” before “run”. If everything works correctly, you should see the reformatting process from the small panel on the bottom left of this popped up window.
228 +
229 +Now the data should be ready. Then you can select these data and right click to output the GPS information associated with them.
230 +
231 +[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center"]]
232 +
233 +When downloading, all the green lights on the nodes will blink. The associated red lights on the rack will flash when it is downloading, and make sure to disconnect the nodes before you unplug anything. Be careful: if the laptop goes to sleep, the download process will pause.
234 +
235 +(% class="box infomessage" %)
236 +(((
237 +**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**. USB-C, USB 3.0, and 4+ Tb of space are highly recommended!
238 +)))
239 +
240 +When downloading, ensure that all metadata is saved along with the file.
241 +
242 +Start and endtime: the system will automatically find the earliest time of the data and set that as the starting time. However, you can set the time a day earlier with a sharp start of 00:00:00. In this case, all the outputted data segments will be 24 hours long starting from midnight.
243 +
244 +//Once downloaded, mark the "D" box on your temporary labels!//
245 +
246 +== Converting data ==
247 +
248 +Check the data all have been converted to miniseed correctly 
249 +
250 +– 3 files per station per day 
251 +
252 +* Files are the same size (NOTE if having memory issues one or more of the components may have 0-1 kb)
253 +* ~~ 5 Gb / node / month
254 +
255 +//Tick ‘R’ box on the node label//
256 +
257 +
258 +== Cleaning ==
259 +
260 +If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
261 +
262 +
263 +)))
264 +
265 +
319 319  (% class="col-xs-12 col-sm-4" %)
320 320  (((
321 321  (% class="box" %)
1706153266647-145.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 MB
Content
1706153354750-415.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 MB
Content
1706153556166-231.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -839.4 KB
Content