Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 40.1
edited by Sima Mousavi
on 2024/01/25 14:53
Change comment: There is no comment for this version
To version 24.1
edited by Sima Mousavi
on 2024/01/24 16:27
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,19 +2,6 @@
2 2  (((
3 3  (% class="col-xs-12 col-sm-8" %)
4 4  (((
5 -= **SmartSolo Node Types and Procedures** =
6 -
7 -**SmartSolo Node Variants:**
8 -
9 -* **SmartSolo IGU 16HR 3C (5 Hz) Short Period Node**
10 -* **SmartSolo BD3C-5 (5-second) Broad-Band Node**
11 -
12 -The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
13 -
14 -This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
15 -
16 -----
17 -
18 18  = **Node Setup** =
19 19  
20 20  Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
... ... @@ -92,9 +92,7 @@
92 92  
93 93  === ===
94 94  
95 -* (((
96 96  === **6- Data Sharing and Metadata Creation** ===
97 -)))
98 98  
99 99  **GPS Data**:
100 100  
... ... @@ -122,7 +122,7 @@
122 122  Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
123 123  )))
124 124  
125 -----
110 += =
126 126  
127 127  === **Seismic Station Demobilization and Documentation** ===
128 128  
... ... @@ -162,183 +162,22 @@
162 162  
163 163  * Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
164 164  * Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
165 -
166 -
167 167  )))
168 168  
169 -[[image:1706153556166-231.jpeg||data-xwiki-image-style-alignment="center" height="345" width="460"]]
170 170  
171 -----
172 172  
173 -=== **Charging Procedure for Seismic Nodes** ===
174 174  
175 -1. (((
176 -**Preparation for Charging**:
177 177  
178 -* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
179 -)))
180 -1. (((
181 -**Disassembling the Node**:
182 182  
183 -* Carefully remove the battery and the spike from the sensor. This is typically done by twisting the spike part of the instrument to release these components.
184 -)))
185 -1. (((
186 -**Setting Nodes in the Charging Box**:
187 187  
188 -* Place up to 16 nodes into the charging box, arranging them with the spikes pointing upwards. This configuration is essential for proper connection and efficient charging.
189 -)))
190 -1. (((
191 -**Monitoring the Charging Process**:
192 192  
193 -* Once the nodes are set in the charging box and the charging process begins, red lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
194 -* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged.
195 -)))
196 -1. (((
197 -**Updating Charge Status**:
198 198  
199 -* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
200 -* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
201 -)))
202 202  
203 -[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center" height="299" width="530"]]
204 204  
205 205  
206 206  
207 207  
208 -[[image:1706153354750-415.png||data-xwiki-image-style-alignment="center" height="317" width="562"]]
209 209  
210 -----
211 -
212 -=== **Downloading and Converting Seismic Data to MiniSeed Format** ===
213 -
214 -==== **Node Registration and Software Setup** ====
215 -
216 -1. (((
217 -**Registering Nodes in the System**:
218 -
219 -* To begin, register the nodes in the system so the software can recognize them.
220 -* Navigate to the installation folder of “SmartSoloApps SoloLite”.
221 -* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
222 -* To avoid double registration, replace the file each time you register a new node.
223 -)))
224 -1. (((
225 -**Creating a New Project in SoloLite**:
226 -
227 -* Open the “SoloLite” software.
228 -* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
229 -* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
230 -)))
231 -
232 -==== **Data Downloading Process** ====
233 -
234 -1. (((
235 -**Initiating Data Download**:
236 -
237 -* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
238 -* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
239 -* Select all nodes and right-click to “force download”. This starts the download process.
240 -* Completed downloads will appear as new folders in the Downloaded Data panel.
241 -)))
242 -1. (((
243 -**Exporting Data in Readable Format**:
244 -
245 -* Go to the “Tool” menu and select “export seismic data”.
246 -* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
247 -* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
248 -* (% class="box warningmessage" %)
249 -(((
250 -* **Ensure to export data as "COUNTS", not "mV".**
251 -
252 -* **Set "Remove Gain" to the same decibel gain as during programming (ANU usually sets this to 18 db, but double-check).**
253 -)))
254 -)))
255 -
256 -==== **Handling Nodes During Download** ====
257 -
258 -1. (((
259 -**Monitoring Download Indicators**:
260 -
261 -* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
262 -* Disconnect nodes properly before unplugging anything.
263 -* Be cautious: if the laptop enters sleep mode, the download will pause.
264 -)))
265 -1. (((
266 -//**Investment in Storage Hardware**~://
267 -
268 -* (% class="box warningmessage" %)
269 -(((
270 -* **Use fast external hard drives to avoid limitations in data harvesting.**
271 -
272 -* **Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.**
273 -)))
274 -)))
275 -1. (((
276 -**Metadata and Time Settings**:
277 -
278 -* Ensure all metadata is saved with the file.
279 -* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
280 -)))
281 -1. (((
282 -**Finalizing the Download**:
283 -
284 -* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
285 -
286 -
287 -)))
288 -
289 -[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
290 -
291 -
292 -
293 -[[Caption>>image:1705195543887-977.png||data-xwiki-image-style-alignment="center" height="534" width="632"]]
294 -
295 -
296 -
297 -
298 -[[Caption>>image:1705195543890-537.png||data-xwiki-image-style-alignment="center" height="397" width="665"]]
299 -
300 -
301 -
302 -[[Caption>>image:1705195543891-334.png||data-xwiki-image-style-alignment="center" height="379" width="650"]]
303 -
304 -
305 -
306 -[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center" height="467" width="674"]]
307 -
308 -----
309 -
310 -=== **Cleaning** ===
311 -
312 -**Procedure for Seismic Nodes:**
313 -
314 -* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
315 -
316 -= =
317 -
318 -= =
319 -
320 -= =
321 -
322 -= =
323 -
324 -= =
325 -
326 -= =
327 -
328 -= =
329 -
330 -= **~=~=~=~=~=~=~=~=~=~=Done! Should be deleted from here~=~=~=~=~=~=~=~=~=~=~=** =
331 -
332 -= =
333 -
334 -= =
335 -
336 -= =
337 -
338 -= =
339 -
340 -= =
341 -
342 342  = SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
343 343  
344 344  blahblah
... ... @@ -346,7 +346,7 @@
346 346  == Sub-paragraph ==
347 347  
348 348  
349 -== [[image:1705196270090-364.png]] ==
173 +== ==
350 350  
351 351  
352 352  = Smart Solo BD3C-5 (5 second) Broad-Band Node =
... ... @@ -353,7 +353,9 @@
353 353  
354 354  Lorem
355 355  
180 +[[image:1705196270090-364.png]]
356 356  
182 +
357 357  == GPS Considerations ==
358 358  
359 359  The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
... ... @@ -437,9 +437,7 @@
437 437  
438 438  Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else
439 439  
440 -[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
441 441  
442 -
443 443  == Charging ==
444 444  
445 445  Clean node prior to charging and harvesting the data
... ... @@ -452,8 +452,10 @@
452 452  
453 453  This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
454 454  
279 +[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
455 455  
456 456  
282 +
457 457  == Downloading and Converting Data to MiniSeed ==
458 458  
459 459  
1706153266647-145.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -1.7 MB
Content
1706153354750-415.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 MB
Content
1706153556166-231.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.sima
Size
... ... @@ -1,1 +1,0 @@
1 -839.4 KB
Content