Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 34.2
edited by Sima Mousavi
on 2024/01/24 17:41
Change comment: There is no comment for this version
To version 39.1
edited by Sima Mousavi
on 2024/01/25 14:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,6 +2,19 @@
2 2  (((
3 3  (% class="col-xs-12 col-sm-8" %)
4 4  (((
5 += **SmartSolo Node Types and Procedures** =
6 +
7 +**SmartSolo Node Variants:**
8 +
9 +* **SmartSolo IGU 16HR 3C (5 Hz) Short Period Node**
10 +* **SmartSolo BD3C-5 (5-second) Broad-Band Node**
11 +
12 +The installation, demobilization, and data downloading procedures for both types of SmartSolo nodes – the IGU 16HR 3C Short Period Node and the BD3C-5 Broad-Band Node – are largely similar.
13 +
14 +This uniformity in process ensures ease of operation across different node types, allowing for a streamlined approach in fieldwork and data management.
15 +
16 +----
17 +
5 5  = **Node Setup** =
6 6  
7 7  Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
... ... @@ -149,8 +149,12 @@
149 149  
150 150  * Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
151 151  * Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
165 +
166 +
152 152  )))
153 153  
169 +[[image:1706153556166-231.jpeg||data-xwiki-image-style-alignment="center" height="345" width="460"]]
170 +
154 154  ----
155 155  
156 156  === **Charging Procedure for Seismic Nodes** ===
... ... @@ -183,6 +183,13 @@
183 183  * This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
184 184  )))
185 185  
203 +[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center" height="299" width="530"]]
204 +
205 +
206 +
207 +
208 +[[image:1706153354750-415.png||data-xwiki-image-style-alignment="center" height="317" width="562"]]
209 +
186 186  ----
187 187  
188 188  === **Downloading and Converting Seismic Data to MiniSeed Format** ===
... ... @@ -225,7 +225,6 @@
225 225  (((
226 226  * **Ensure to export data as "COUNTS", not "mV".**
227 227  
228 -
229 229  * **Set "Remove Gain" to the same decibel gain as during programming (ANU usually sets this to 18 db, but double-check).**
230 230  )))
231 231  )))
... ... @@ -240,7 +240,7 @@
240 240  * Be cautious: if the laptop enters sleep mode, the download will pause.
241 241  )))
242 242  1. (((
243 -**Investment in Storage Hardware**:
266 +//**Investment in Storage Hardware**~://
244 244  
245 245  * (% class="box warningmessage" %)
246 246  (((
... ... @@ -259,8 +259,39 @@
259 259  **Finalizing the Download**:
260 260  
261 261  * After downloading, mark the //"D"// box on your temporary labels to indicate completion.
285 +
286 +
262 262  )))
263 263  
289 +[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
290 +
291 +
292 +
293 +[[Caption>>image:1705195543887-977.png||data-xwiki-image-style-alignment="center" height="534" width="632"]]
294 +
295 +
296 +
297 +
298 +[[Caption>>image:1705195543890-537.png||data-xwiki-image-style-alignment="center" height="397" width="665"]]
299 +
300 +
301 +
302 +[[Caption>>image:1705195543891-334.png||data-xwiki-image-style-alignment="center" height="379" width="650"]]
303 +
304 +
305 +
306 +[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center" height="467" width="674"]]
307 +
308 +----
309 +
310 +=== **Cleaning** ===
311 +
312 +**Procedure for Seismic Nodes:**
313 +
314 +* If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
315 +
316 += =
317 +
264 264  = SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
265 265  
266 266  blahblah
... ... @@ -268,7 +268,7 @@
268 268  == Sub-paragraph ==
269 269  
270 270  
271 -== ==
325 +== [[image:1705196270090-364.png]] ==
272 272  
273 273  
274 274  = Smart Solo BD3C-5 (5 second) Broad-Band Node =
... ... @@ -275,9 +275,7 @@
275 275  
276 276  Lorem
277 277  
278 -[[image:1705196270090-364.png]]
279 279  
280 -
281 281  == GPS Considerations ==
282 282  
283 283  The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
... ... @@ -361,7 +361,9 @@
361 361  
362 362  Use existing field logbook to note time, SN and station name plus any notes – including any issues with orientation or level or anything else
363 363  
416 +[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
364 364  
418 +
365 365  == Charging ==
366 366  
367 367  Clean node prior to charging and harvesting the data
... ... @@ -374,10 +374,8 @@
374 374  
375 375  This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
376 376  
377 -[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
378 378  
379 379  
380 -
381 381  == Downloading and Converting Data to MiniSeed ==
382 382  
383 383  
1706153266647-145.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.sima
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 MB
Content
1706153354750-415.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.sima
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 MB
Content
1706153556166-231.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.sima
Size
... ... @@ -1,0 +1,1 @@
1 +839.4 KB
Content