Skip to Content
Last modified by robert on 2025/06/16 07:51
From version 24.1
edited by Sima Mousavi
on 2024/01/24 16:27
Change comment: There is no comment for this version
To version 9.2
edited by robert
on 2024/01/14 13:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.sima
1 +XWiki.robert
Content
... ... @@ -2,167 +2,6 @@
2 2  (((
3 3  (% class="col-xs-12 col-sm-8" %)
4 4  (((
5 -= **Node Setup** =
6 -
7 -Short term (~~30 day) battery powered nodes. The default gain should be 24 db for the 16HR-3C and 6 db for the BD3C-5
8 -
9 -
10 -~*~**this needs to be reformatted
11 -
12 -== **Pre-Fieldwork Preparation** ==
13 -
14 -(% class="box infomessage" %)
15 -(((
16 -(% class="box warningmessage" %)
17 -(((
18 -**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**
19 -
20 -**Plan on 1 Tb to store ALL data for 50 nodes @ 250 Hz and a single ~~30 day occupation**
21 -)))
22 -)))
23 -
24 -= **Installation** =
25 -
26 -=== **1- Logbook documentation** ===
27 -
28 -(((
29 -**Essential Details**: Record the following in a logbook:
30 -
31 -* Station name
32 -* Latitude and longitude
33 -* Names of team members present
34 -* Date and local time of installation
35 -* Serial number (SN) of the sensor
36 -* Detailed notes on the site conditions and setup
37 -
38 -=== **2- Node Placement** ===
39 -)))
40 -
41 -**Protection**: Place nodes inside thick, landfill biodegradable plastic bags for environmental protection.
42 -
43 -**Site Analysis**:
44 -
45 -* Conduct compass measurements away from the node and metallic structures, adjusting for inclination angle.
46 -* Take multiple photographs from various angles to document the site setup thoroughly.
47 -* Include a detailed site description in your notes, specifying distances and orientations from nearby landmarks (e.g. Richards garden, Te Mini steam field eastern side)
48 -
49 -=== **3- GPS Considerations** ===
50 -
51 -(% class="wikigeneratedid" %)
52 -The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
53 -
54 -=== **4- Visibility and Location Marking** ===
55 -
56 -**Flag Placement**: Position a flag, preferably in a bright color (avoid green or yellow), near the instrument to aid in its future location.
57 -
58 -**GPS Marking**:
59 -
60 -* Use a GPS device to mark the instrument's exact location.
61 -* Record this location in both your paper notes and the GPS device.
62 -
63 -=== (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)**5- Charge Time, Pre-Deployment & Post-Deployment**(%%) ===
64 -
65 -* **Charging Duration**: Both types of nodes take approximately 6-8 hours to fully charge from a flat state.
66 -* **Pre-Deployment Charging**:
67 -** Although the nodes hold their charge well, it's beneficial to give them a "top up" charge right before deployment.
68 -
69 -* **Operational Duration**:
70 -** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle.
71 -
72 -* **Post-Retrieval Charging**:
73 -** Do not store the instruments with completely drained batteries.
74 -** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) for optimal battery health.
75 -
76 -* **Storage and Shipping Charge Level**:
77 -** Maintain a battery charge level of around 50-60% for both storage and shipping purposes.
78 -** This charge level is recommended to prevent battery damage and is safe for transportation.
79 -
80 -=== ===
81 -
82 -=== **6- Data Sharing and Metadata Creation** ===
83 -
84 -**GPS Data**:
85 -
86 -* Download the GPS file to a laptop.
87 -* Share this file on a drive accessible to all team members for uniform understanding of node locations.
88 -
89 -**Photo Sharing**:
90 -
91 -* Upload site photos to a shared platform (OneDrive, Dropbox, etc.).
92 -* Integrating photos into Google Maps or Google Earth can be particularly beneficial for easy location referencing.
93 -
94 -**Metadata File**:
95 -
96 -* Create a metadata XML file for each node, which is essential for data organisation and future reference.
97 -
98 -=== **7- Additional Best Practices** ===
99 -
100 -* **Environmental Responsibility**: Ensure that the node placement and the materials used are environmentally responsible and adhere to local regulations.
101 -* **Training and Familiarisation**: Make sure all team members are adequately trained in using the GPS devices, compass, and other equipment to ensure consistent and accurate data collection.
102 -
103 -* (((
104 -==== **Keeping the Instruments Clean** ====
105 -)))
106 -* (((
107 -Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
108 -)))
109 -
110 -= =
111 -
112 -=== **Seismic Station Demobilization and Documentation** ===
113 -
114 -1. (((
115 -**Preparation for Demobilization**:
116 -
117 -* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
118 -)))
119 -1. (((
120 -**Locating the instrument**:
121 -
122 -* Use the downloaded GPS file to accurately locate the node for demobilization.
123 -* Import this KMZ file onto your phone for easy reference and location tracking.
124 -* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
125 -)))
126 -1. (((
127 -**Labeling Instruments for Demobilization**:
128 -
129 -* Write the station name and the instrument’s serial number on a label.
130 -* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
131 -* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
132 -)))
133 -1. (((
134 -**Photographing the Setup Node**:
135 -
136 -* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
137 -* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
138 -)))
139 -1. (((
140 -**Logging Demobilization Details**:
141 -
142 -* Use the field logbook to note the time of demobilization, serial numbers, and station name.
143 -* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
144 -)))
145 -1. (((
146 -**Final Checks and Equipment Removal**:
147 -
148 -* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
149 -* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
150 -)))
151 -
152 -
153 -
154 -
155 -
156 -
157 -
158 -
159 -
160 -
161 -
162 -
163 -
164 -
165 -
166 166  = SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
167 167  
168 168  blahblah
... ... @@ -186,7 +186,7 @@
186 186  
187 187  = Keeping the Instruments Clean =
188 188  
189 -Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
28 +Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
190 190  
191 191  
192 192  = Charge Time, Instrument Life, and Charge During Storage & Shipping =
... ... @@ -350,60 +350,27 @@
350 350  
351 351  (% class="col-xs-12 col-sm-4" %)
352 352  (((
353 -(% class="box" %)
354 -(((
355 -**Contents**
192 +{{box title="**Contents**"}}
193 +{{toc/}}
194 +{{/box}}
356 356  
357 -(% class="wikitoc" %)
358 -* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]
359 -** [[Sub-paragraph>>path:#HSub-paragraph]]
360 -** [[ >>path:#H]]
361 -* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]
362 -** [[GPS Considerations>>path:#HGPSConsiderations]]
363 -* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]
364 -* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]
365 -* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]
366 -** [[Install>>path:#HInstall]]
367 -** [[Removing/Demob>>path:#HRemoving2FDemob]]
368 -** [[Charging>>path:#HCharging]]
369 -** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]
370 -** [[Converting data>>path:#HConvertingdata]]
371 -** [[Cleaning>>path:#HCleaning]]
372 -)))
196 +{{box title="= SmartSolo [[BD3C-5>>https://smartsolo.com/cp-4.html]] =
373 373  
198 += [[image:Trillium compact posthole.jpg]] =
374 374  
375 -(% class="box" %)
376 -(((
377 -= SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =
200 +|(% style="~"width:115px~"" %)**Frequency Band**|(% style="~"width:112px~"" %)5 Seconds to 150Hz
201 +|(% style="~"width:115px~"" %)**Sensitivity**|(% style="~"width:112px~"" %)200 V/m/s
202 +|(% style="~"width:139px~"" %)**Size (Diameter x Height)**|(% style="~"width:88px~"" %)? x ? cm
203 +|(% style="~"width:139px~"" %)**Weight**|(% style="~"width:88px~"" %)2.8 kg
204 +|(% style="~"width:139px~"" %)**Data Storage**|(% style="~"width:88px~"" %)64 Gb))
378 378  
379 -[[image:Smartsolo IGU BD3C 5 (2).jpg]]
206 +{{/box}}
380 380  
381 -[[image:smartsolo.jpg]]
208 +{{info}}
209 +Info
210 +{{/info}}
382 382  
383 -|(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz
384 -|(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s
385 -|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm
386 -|(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg
387 -|(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb
388 -|(% style="width:189px" %)**Battery**|(% style="width:221px" %)Li_etc XXAh
389 -)))
390 390  
391 -(% class="box" %)
392 -(((
393 -= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
394 -
395 -[[image:smartsolo node.jpg]]
396 -
397 -[[image:smartsolo node 2.jpg]]
398 -
399 -|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz
400 -|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s
401 -|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
402 -|(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.3 kg
403 -|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb
404 -|(% style="width:187px" %)**Battery**|(% style="width:224px" %)Li_etc XXAh
405 -)))
406 -
407 407  
408 408  )))
409 409  )))
Smartsolo IGU BD3C 5 (2).jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -909.0 KB
Content
Smartsolo IGU BD3C 5.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 MB
Content
smartsolo node 2.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.0 MB
Content
smartsolo node.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
smartsolo.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.0 MB
Content