Skip to Content
Last modified by robert on 2025/08/21 13:08
From version 23.1
edited by robert
on 2024/01/24 11:33
Change comment: There is no comment for this version
To version 34.2
edited by Sima Mousavi
on 2024/01/24 17:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.sima
Content
... ... @@ -79,9 +79,9 @@
79 79  
80 80  === ===
81 81  
82 -=== ===
83 -
82 +* (((
84 84  === **6- Data Sharing and Metadata Creation** ===
84 +)))
85 85  
86 86  **GPS Data**:
87 87  
... ... @@ -109,8 +109,158 @@
109 109  Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
110 110  )))
111 111  
112 -= =
112 +----
113 113  
114 +=== **Seismic Station Demobilization and Documentation** ===
115 +
116 +1. (((
117 +**Preparation for Demobilization**:
118 +
119 +* Before starting the demobilization process, ensure you have a compass, tape, marker, pen, clipboard, logbook, and compass ready in your tote bag.
120 +)))
121 +1. (((
122 +**Locating the instrument**:
123 +
124 +* Use the downloaded GPS file to accurately locate the node for demobilization.
125 +* Import this KMZ file onto your phone for easy reference and location tracking.
126 +* Utilize Google Maps or Google Earth to create a KMZ file of the station’s location.
127 +)))
128 +1. (((
129 +**Labeling Instruments for Demobilization**:
130 +
131 +* Write the station name and the instrument’s serial number on a label.
132 +* Add markers 'D' (for download), 'C' (for charge), and ‘R’ (for removal) next to checkboxes on the label.
133 +* Affix this label to the top of the instrument to avoid confusion during the charging and downloading data.
134 +)))
135 +1. (((
136 +**Photographing the Setup Node**:
137 +
138 +* Take a photo of the entire setup node with the __//label//__ and __//compass visible//__.
139 +* This photo serves as a final record of the instrument’s condition and orientation at the time of removal.
140 +)))
141 +1. (((
142 +**Logging Demobilization Details**:
143 +
144 +* Use the field logbook to note the time of demobilization, serial numbers, and station name.
145 +* Record any observations or issues related to the instrument’s orientation, level, or any other relevant factors.
146 +)))
147 +1. (((
148 +**Final Checks and Equipment Removal**:
149 +
150 +* Before physically removing the instrument, double-check that all necessary data has been downloaded and all photos and notes have been taken.
151 +* Carefully dismantle and pack the equipment, ensuring that all components are accounted for and securely stored for transport.
152 +)))
153 +
154 +----
155 +
156 +=== **Charging Procedure for Seismic Nodes** ===
157 +
158 +1. (((
159 +**Preparation for Charging**:
160 +
161 +* Before charging, ensure each node is clean. This involves removing any dirt or debris to maintain the integrity of the equipment and ensure effective charging.
162 +)))
163 +1. (((
164 +**Disassembling the Node**:
165 +
166 +* Carefully remove the battery and the spike from the sensor. This is typically done by twisting the spike part of the instrument to release these components.
167 +)))
168 +1. (((
169 +**Setting Nodes in the Charging Box**:
170 +
171 +* Place up to 16 nodes into the charging box, arranging them with the spikes pointing upwards. This configuration is essential for proper connection and efficient charging.
172 +)))
173 +1. (((
174 +**Monitoring the Charging Process**:
175 +
176 +* Once the nodes are set in the charging box and the charging process begins, red lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
177 +* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged.
178 +)))
179 +1. (((
180 +**Updating Charge Status**:
181 +
182 +* During the charging period, take this opportunity to update the status of each unit. Check the //"C"// box on your temporary labels to indicate that the unit has been successfully charged.
183 +* This step is crucial for tracking the charging status of multiple units, especially when handling a large number of nodes.
184 +)))
185 +
186 +----
187 +
188 +=== **Downloading and Converting Seismic Data to MiniSeed Format** ===
189 +
190 +==== **Node Registration and Software Setup** ====
191 +
192 +1. (((
193 +**Registering Nodes in the System**:
194 +
195 +* To begin, register the nodes in the system so the software can recognize them.
196 +* Navigate to the installation folder of “SmartSoloApps SoloLite”.
197 +* Right-click on deviceconfig.exe and choose “run as an administrator”. Save the file to the “deviceconfig” directory (refer to the snapshot below).
198 +* To avoid double registration, replace the file each time you register a new node.
199 +)))
200 +1. (((
201 +**Creating a New Project in SoloLite**:
202 +
203 +* Open the “SoloLite” software.
204 +* Go to “File” and create a new project. Don't worry about finding the exact 16 nodes used in script writing.
205 +* Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
206 +)))
207 +
208 +==== **Data Downloading Process** ====
209 +
210 +1. (((
211 +**Initiating Data Download**:
212 +
213 +* Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
214 +* If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
215 +* Select all nodes and right-click to “force download”. This starts the download process.
216 +* Completed downloads will appear as new folders in the Downloaded Data panel.
217 +)))
218 +1. (((
219 +**Exporting Data in Readable Format**:
220 +
221 +* Go to the “Tool” menu and select “export seismic data”.
222 +* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
223 +* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
224 +* (% class="box warningmessage" %)
225 +(((
226 +* **Ensure to export data as "COUNTS", not "mV".**
227 +
228 +
229 +* **Set "Remove Gain" to the same decibel gain as during programming (ANU usually sets this to 18 db, but double-check).**
230 +)))
231 +)))
232 +
233 +==== **Handling Nodes During Download** ====
234 +
235 +1. (((
236 +**Monitoring Download Indicators**:
237 +
238 +* During download, green lights on nodes will blink, and associated red lights on the rack will flash.
239 +* Disconnect nodes properly before unplugging anything.
240 +* Be cautious: if the laptop enters sleep mode, the download will pause.
241 +)))
242 +1. (((
243 +**Investment in Storage Hardware**:
244 +
245 +* (% class="box warningmessage" %)
246 +(((
247 +* **Use fast external hard drives to avoid limitations in data harvesting.**
248 +
249 +* **Recommended specifications: USB-C, USB 3.0, and 4+ Tb of space.**
250 +)))
251 +)))
252 +1. (((
253 +**Metadata and Time Settings**:
254 +
255 +* Ensure all metadata is saved with the file.
256 +* System auto-determines the earliest data time as the start time. You can set it a day earlier at 00:00:00 for 24-hour data segments starting from midnight.
257 +)))
258 +1. (((
259 +**Finalizing the Download**:
260 +
261 +* After downloading, mark the //"D"// box on your temporary labels to indicate completion.
262 +)))
263 +
114 114  = SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
115 115  
116 116  blahblah