Skip to Content
Last modified by robert on 2025/06/16 07:51
From version 17.1
edited by Sima Mousavi
on 2024/01/16 15:53
Change comment: There is no comment for this version
To version 7.1
edited by robert
on 2024/01/14 12:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.sima
1 +XWiki.robert
Content
... ... @@ -2,36 +2,6 @@
2 2  (((
3 3  (% class="col-xs-12 col-sm-8" %)
4 4  (((
5 -= **Node Setup** =
6 -
7 -Short term (~~30 day) battery powered nodes
8 -
9 -== **Pre-Fieldwork Preparation** ==
10 -
11 ->(% class="box infomessage" %)
12 -(((
13 -**~ INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING **
14 -)))
15 -
16 -== **Installation** ==
17 -
18 -* (((
19 -**Logbook Maintenance**: Document essential details:
20 -
21 -* Station name, latitude/longitude, team members, date/time.
22 -* Serial number (SN) of sensor, site notes.
23 -)))
24 -* **Node Placement**: Use biodegradable plastic bags for node protection.
25 -* **Orientation and Site Description**:
26 -** Compass measurements (adjust for inclination).
27 -** Detailed description of the site, including landmarks.
28 -* **Visibility and GPS Marking**:
29 -** Use distinctively colored flags for easy location.
30 -** Mark location with GPS; record in logbook and device.
31 -* **Photo Documentation**: Take multiple photos from various angles.
32 -
33 -= =
34 -
35 35  = SmartSolo IGU 16HR 3C (5 Hz) Short Period Node =
36 36  
37 37  blahblah
... ... @@ -46,16 +46,14 @@
46 46  
47 47  Lorem
48 48  
49 -[[image:1705196270090-364.png]]
50 50  
51 -
52 52  == GPS Considerations ==
53 53  
54 54  The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. The BD3C will not start recording without first attaining a GPS lock.
55 55  
56 -= Keeping the Instruments Clean =
24 +== Keeping the Instruments Clean ==
57 57  
58 -Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>url:http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
26 +Use a (**landfill**, not //compost//) degradable bag when installing to keep the instrument clean. This will save you many hours of time cleaning them in preparation for their return. [[Here is a video>>http://auspass.edu.au/field/bd3c_removal.mp4]] demonstrating its effectiveness.
59 59  
60 60  
61 61  = Charge Time, Instrument Life, and Charge During Storage & Shipping =
... ... @@ -67,7 +67,7 @@
67 67  
68 68  = Best Practices and Guide =
69 69  
70 -== Install ==
38 +== Install ==
71 71  
72 72  Logbook is required (used again for pick up & metadata creation)
73 73  
... ... @@ -102,7 +102,7 @@
102 102  Create metadata .xml file
103 103  
104 104  
105 -== Removing/Demob ==
73 +== Removing/Demob ==
106 106  
107 107  Download and then use the GPS file to locate the node 
108 108  
... ... @@ -109,7 +109,7 @@
109 109  Use Google Maps / Google Earth to create a kmz file that can then be imported onto your phone.  
110 110  
111 111  
112 -Upload photos of the site  
80 +Upload photos of the site
113 113  
114 114  - station name
115 115  
... ... @@ -120,13 +120,13 @@
120 120  - elevation
121 121  
122 122  * SN of sensor – SN of battery (optional)
123 -* Site notes and name of location (e.g. Richards garden, Te Mini steam field eastern side) 
91 +* Site notes and name of location (e.g. Richards garden, Te Mini steam field eastern side)
124 124  
125 125  Upload photos into Google Earth and on a shared drive
126 126  
127 127  Before removing the instrument have your compass, tape, marker, pen, clipboard, logbook and compass ready (in tote bag!). 
128 128  
129 -Write the station name and the instrument’s serial number, along with 'D' and 'C' and ‘R’, each next to a box to indicate 'download' and 'charge'. Stick this label to the top of the instrument. When dealing with dozens or hundreds of these you WILL start to mix them up after a while! Having an easy visual cue keep them sorted will save you a great deal of confusion later on.
97 +Write the station name and the instrument’s serial number, along with 'D' and 'C' and ‘R’, each next to a box to indicate 'download' and 'charge'. Stick this label to the top of the instrument.
130 130  
131 131  Take a photo of the entire setup node with the label on it + compass 
132 132  
... ... @@ -145,74 +145,6 @@
145 145  
146 146  This is a good time to check the "C" box on your temporary labels to mark that the unit has been charged
147 147  
148 -[[IGU 16-HRcharger (left) and harvester (right)>>image:1705195933422-337.png||data-xwiki-image-style-alignment="center"]]
149 -
150 -
151 -
152 -== Downloading and Converting Data to MiniSeed ==
153 -
154 -
155 -The first thing to do is to register the nodes in the system, so the software can recognize them. To do this, go to the folder where the “SmartSoloApps SoloLite” was installed. Then right-click the deviceconfig.exe program to “run as an administrator” and save the file to the directory of “deviceconfig” (snapshot below). Note that to avoid registering the same node twice, you can simply replace the file each time you do the registration.
156 -
157 -[[image:1705195543887-977.png]]
158 -
159 -
160 -Then open the “SoloLite” software, and just go to “File” to make a new project. In this case, you do not need to find the exact 16 nodes that were grouped for script writing. Do not worry about the settings for the seismic recordings for the next window to pop up, as the only way to reset the instruments (e.g., sampling rate, gain etc) is to write script to re-program them.
161 -
162 -[[image:1705195543890-537.png||data-xwiki-image-style-alignment="center"]]
163 -
164 -
165 -Once you create the new project, your Data Transfer View panel on the bottom right of the window will show these nodes that have properly connected to the data harvest, including series number, data size etc. It is okay if the “Prospect not matched”, which simply means the project you just created does not match the one you made to program them. Simply select all these nodes, and right click to “force download”, which will initiate the downloading process. Once they are done, you will see new folders created for each slot at your Downloaded Data panel on the top left of the window.
166 -
167 -[[image:1705195543891-334.png||data-xwiki-image-style-alignment="center"]]
168 -
169 -At this stage, it means that the raw DLL data of the recording has been downloaded successfully to your local machine. To output data in readable format, such as SAC or miniSEED, click the “Tool” menu and select “export seismic data”. The parameters here should be straightforward to set and tailored to personal reference.
170 -
171 -(% class="box warningmessage" %)
172 -(((
173 -**Please make sure that data is exported as "COUNTS" and NOT "mV"!**
174 -)))
175 -
176 -(% class="box warningmessage" %)
177 -(((
178 -**Furthermore you must also set "Remove Gain" to the same decibel gain setting that was set during programming! ANU always set this to 18 db (double check) for all types of nodes.**
179 -)))
180 -
181 -A list of ANU group preferred parameters can be found at the end of this session. One thing to note is that the “Sample Interval” must be set exactly to this used to reset the nodes. Once you are done with the setting, click “prepare” before “run”. If everything works correctly, you should see the reformatting process from the small panel on the bottom left of this popped up window.
182 -
183 -Now the data should be ready. Then you can select these data and right click to output the GPS information associated with them.
184 -
185 -[[image:1705195543898-365.png||data-xwiki-image-style-alignment="center"]]
186 -
187 -When downloading, all the green lights on the nodes will blink. The associated red lights on the rack will flash when it is downloading, and make sure to disconnect the nodes before you unplug anything. Be careful: if the laptop goes to sleep, the download process will pause.
188 -
189 -(% class="box infomessage" %)
190 -(((
191 -**INVEST IN FAST EXTERNAL HARD DRIVES – DO NOT LET THIS BE THE LIMITATION OF DATA HARVESTING**. USB-C, USB 3.0, and 4+ Tb of space are highly recommended!
192 -)))
193 -
194 -When downloading, ensure that all metadata is saved along with the file.
195 -
196 -Start and endtime: the system will automatically find the earliest time of the data and set that as the starting time. However, you can set the time a day earlier with a sharp start of 00:00:00. In this case, all the outputted data segments will be 24 hours long starting from midnight.
197 -
198 -//Once downloaded, mark the "D" box on your temporary labels!//
199 -
200 -== Converting data ==
201 -
202 -Check the data all have been converted to miniseed correctly 
203 -
204 -– 3 files per station per day 
205 -
206 -* Files are the same size (NOTE if having memory issues one or more of the components may have 0-1 kb)
207 -* ~~ 5 Gb / node / month
208 -
209 -//Tick ‘R’ box on the node label//
210 -
211 -
212 -== Cleaning ==
213 -
214 -If the nodes are placed in a thick plastic bag at the time of installation, the cleaning procedure should be straightforward. If not you have a lot of work to do before they are returned to us!
215 -
216 216  
217 217  )))
218 218  
... ... @@ -219,60 +219,33 @@
219 219  
220 220  (% class="col-xs-12 col-sm-4" %)
221 221  (((
222 -(% class="box" %)
223 -(((
224 -**Contents**
122 +{{box title="**Contents**"}}
123 +{{toc/}}
124 +{{/box}}
225 225  
226 -(% class="wikitoc" %)
227 -* [[SmartSolo IGU 16HR 3C (5 Hz) Short Period Node>>path:#HSmartSoloIGU16HR3C285Hz29ShortPeriodNode]]
228 -** [[Sub-paragraph>>path:#HSub-paragraph]]
229 -** [[ >>path:#H]]
230 -* [[Smart Solo BD3C-5 (5 second) Broad-Band Node>>path:#HSmartSoloBD3C-5285second29Broad-BandNode]]
231 -** [[GPS Considerations>>path:#HGPSConsiderations]]
232 -* [[Keeping the Instruments Clean>>path:#HKeepingtheInstrumentsClean]]
233 -* [[Charge Time, Instrument Life, and Charge During Storage & Shipping>>path:#HChargeTime2CInstrumentLife2CandChargeDuringStorage26Shipping]]
234 -* [[Best Practices and Guide>>path:#HBestPracticesandGuide]]
235 -** [[Install>>path:#HInstall]]
236 -** [[Removing/Demob>>path:#HRemoving2FDemob]]
237 -** [[Charging>>path:#HCharging]]
238 -** [[Downloading and Converting Data to MiniSeed>>path:#HDownloadingandConvertingDatatoMiniSeed]]
239 -** [[Converting data>>path:#HConvertingdata]]
240 -** [[Cleaning>>path:#HCleaning]]
241 -)))
126 +{{box title="= SmartSolo [[BD3C-5>>https://smartsolo.com/cp-4.html]] =
242 242  
128 += [[image:Trillium compact posthole.jpg]] =
243 243  
244 -(% class="box" %)
245 -(((
246 -= SmartSolo [[BD3C-5>>url:https://smartsolo.com/cp-4.html]] =
130 +|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)5 seconds
131 +|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
132 +|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
133 +|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
134 +
135 +{{/box}}
247 247  
248 -[[image:Smartsolo IGU BD3C 5 (2).jpg]]
137 +{{box title="= SmartSolo [[IGU-16HR>>https://smartsolo.com/cp-3.html]] =
249 249  
250 -[[image:smartsolo.jpg]]
139 += [[image:Trillium compact posthole.jpg]] =
251 251  
252 -|(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz
253 -|(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s
254 -|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm
255 -|(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg
256 -|(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb
257 -|(% style="width:189px" %)**Battery**|(% style="width:221px" %)Li_etc XXAh
258 -)))
141 +|(% style=~"width:115px~" %)**Sensitivity **|(% style=~"width:112px~" %)0.2 seconds (5 Hz)
142 +|(% style=~"width:139px~" %)**Size (Diameter x Height)**|(% style=~"width:88px~" %)? x ? cm
143 +|(% style=~"width:139px~" %)**Weight**|(% style=~"width:88px~" %)? kg"}}
144 +|(% style="width:228px" %)**Battery**|(% style="width:183px" %)lithium (30 days)
145 +
146 +{{/box}}
259 259  
260 -(% class="box" %)
261 -(((
262 -= SmartSolo [[IGU-16HR>>url:https://smartsolo.com/cp-3.html]] =
263 263  
264 -[[image:smartsolo node.jpg]]
265 -
266 -[[image:smartsolo node 2.jpg]]
267 -
268 -|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz
269 -|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s
270 -|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
271 -|(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.3 kg
272 -|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb
273 -|(% style="width:187px" %)**Battery**|(% style="width:224px" %)Li_etc XXAh
274 -)))
275 -
276 276  
277 277  )))
278 278  )))
1705195543887-977.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -259.0 KB
Content
1705195543890-537.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -52.4 KB
Content
1705195543891-334.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
1705195543898-365.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -141.1 KB
Content
1705195933422-337.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
1705196270090-364.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -375.2 KB
Content
Smartsolo IGU BD3C 5 (2).jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -909.0 KB
Content
Smartsolo IGU BD3C 5.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 MB
Content
smartsolo node 2.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.0 MB
Content
smartsolo node.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
smartsolo.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -1.0 MB
Content