Skip to Content
Last modified by robert on 2026/08/12 13:08
From version 118.1
edited by robert
on 2026/08/12 13:06
Change comment: There is no comment for this version
To version 119.1
edited by robert
on 2026/08/12 13:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -108,11 +108,13 @@
108 108  
109 109  == 2. Burial ==
110 110  
111 -ALL nodes should be buried flush with the ground, no exceptions. If the node is sticking up the data data quality will be significantly reduced (especially the horizontal channels, see [[below>>https://auspass.edu.au/xwiki/bin/view/Instrumentation/SmartSolo%20Nodes/#HIGU-16Horizontalnoise26howtoavoid]]). It also catches wind, makes them more visible, etc. But mostly it makes the data bad. //Don't be lazy. Do it right. //
111 +**ALL nodes should be buried flush with the ground, no exceptions**. If the node is sticking up the data data quality will be significantly reduced (especially the horizontal channels, see [[below>>https://auspass.edu.au/xwiki/bin/view/Instrumentation/SmartSolo%20Nodes/#HIGU-16Horizontalnoise26howtoavoid]]). It also catches wind, makes them more visible, etc. But mostly it makes the data bad.
112 112  
113 +//Don't be lazy. Do it right. //
114 +
113 113  [[An example of what not to do.>>image:1786503344572-296.jpg||data-xwiki-image-style-alignment="center" height="341" width="404"]]
114 114  
115 -[[North channel PSD of the sensor in the picture above (not good)>>image:1786503812585-338.02.28 PM.png||data-xwiki-image-style-alignment="center" height="244" width="451"]]
117 +[[North channel PSD of the sensor in the picture above (it is not good)>>image:1786503812585-338.02.28 PM.png||data-xwiki-image-style-alignment="center" height="244" width="451"]]
116 116  
117 117  == 3. Node Placement ==
118 118  )))