Skip to Content
Last modified by robert on 2026/06/29 16:42
From version 112.1
edited by robert
on 2026/06/17 16:54
Change comment: There is no comment for this version
To version 78.1
edited by Jack Dent
on 2025/08/01 16:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.JackD
Content
... ... @@ -4,32 +4,24 @@
4 4  (((
5 5  = **Node Types** =
6 6  
7 -ANSIR supply two types of three-channel nodes, and one type of one-channel node:
7 +ANSIR carry two types of three-channel nodes, and one type of one-channel node:
8 8  
9 -* **SmartSolo IGU-16HR 3C (5 Hz, 'very' short period)**
10 -* **SmartSolo BD3C-5 (5 second, short period)**
11 -* **SmartSolo IGU-16 1C (5 Hz, 'very' short period, single channel. Not 'HR')**
9 +* **SmartSolo IGU 16HR 3C (5 Hz Short Period)**
10 +* **SmartSolo BD3C-5 (5 Second Broadband)**
11 +* **SmartSolo IGU 16 1C (5 Hz Short Period, single channel)**
12 12  
13 -Visit the [[SmartSolo page>>https://smartsolo.com/igu.html]] for more detail.
13 +The three-channel nodes have a battery capacity of ~~30 days, whereas the single-channel type has a capacity of ~~100 days. The programming, operation and downloading procedures for all types of SmartSolo nodes are also similar.
14 14  
15 -The three-channel nodes have a theoretical battery capacity of ~~30 days, whereas the single-channel type has a capacity of ~~50 days. The programming, operation and downloading procedures for all types of SmartSolo nodes are also similar.
16 -
17 -(% class="box infomessage" %)
18 -(((
19 -**Freight update, 2026: **Freight options for lithium-ion batteries are changing in 2025/2026 to comply with updated transport safety regulations. This will impact supply of IGU 16 (<100Wh) and BD3C (168Wh) nodes. Advice will be sought from freighters on a case-by-case basis while they implement new guidelines.
20 -)))
21 -
22 22  ----
23 23  
24 24  = **Programming Defaults** =
25 25  
26 -The nodes must be programmed in the SoloLite software prior to use. The screenshots below show our recommended parameters for the 5 Hz (16HR-3C) and 5 second (BDC3-5) nodes.
19 +The nodes must be programmed in the SoloLite software prior to use. Screenshots for the short period 16HR-3C and broadband BDC3-5 are shown with our recommended parameters.
27 27  
28 -[[IGU16HR-3C programming screen set at 250 Hz. Ensure circled areas are set!>>image:5Hz_node_programming.labels.png||alt="IGU-16 3C programming screen"]]
21 +[[IGU-16 3C (short period node) programming screen set at 250 Hz. Ensure that the highlighted areas are set!>>image:SP_programming.labels.png||alt="IGU-16 3C programming screen"]]
29 29  
30 -[[BD3C-5 programming screen set at 250 Hz. Ensure circled areas are set!>>image:5S_node_programming.labels.png||alt="BD3C-5 programming screen set at 250 hz. Ensure that the circled areas are set!"]]
23 +[[BD3C-5 (broadband node) programming screen set at 250 hz. Ensure that the highlighted areas are set!>>image:BB_programming.labels.png||alt="BD3C-5 programming screen"]]
31 31  
32 -
33 33  FIFO (first in, first out) data mode is safest as this will overwrite old data in case you forgot to clear the storage. At <= 250 hz you can fit 4++ months of data on these, shouldn't be an issue.
34 34  
35 35  Note that the samplerate is instead given in sample spacing, in milliseconds. 4 ms = 250 Hz, 1 ms = 1000 Hz, 10 ms = 100 Hz, ad nauseam.
... ... @@ -44,9 +44,9 @@
44 44  
45 45  GPS is best set to cycle mode (e.g. once per hour) instead of constant "always on". The clock drift on these are almost nil even if there is no sync at all, so it's best to conserve power.
46 46  
47 -Bluetooth (BD3C-5 only) should be turned OFF to conserve power.
39 +Bluetooth (BB nodes only) should be turned OFF to conserve power.
48 48  
49 -We recommend that the 16HR-3C be set to a gain of 24db for passive experiments and no higher than 250 Hz sampling rate unless there is an explicit reason to do so. The BD3C-5 should be set to a gain of 6db (which is the maximum allowed) for passive experiments (or 0 db if active).
41 +We recommend that the SP 16HR-3C be set to a gain of 24db for passive experiments and no higher than 250 Hz sampling rate unless there is an explicit reason to do so. The BD3C-5 should be set to a gain of 6db (which is the maximum allowed) for passive experiments (or 0 db if active).
50 50  
51 51  {{info}}
52 52  **Note that any applied instrument gain must be removed when exporting (e.g. to miniseed) after your deploy, **otherwise amplitudes will be a factor of either 15.84893192 (24db) or 2 (6db) too high!
... ... @@ -69,20 +69,8 @@
69 69  
70 70  == Animal-Proofing ==
71 71  
72 -We have experienced interference from animals (foxes, dogs, goats) digging up and carrying nodes off for tens or hundreds of metres. It is helpful to minimise human and food smells (particularly on the rope handles) when working in areas where this is a risk. Or, wipe down affected nodes with 50-80% methylated spirits if extensive handling can not be avoided.
64 +We have experienced times where foxes (or some other animal) will dig up nodes and potentially carry them off for tens or hundreds of meteres. Being sanitary with the rope handles (e.g. not getting food grease on them) seems to help, as well as spraying the nodes and handles with methylated spirits et al. when deploying. There are other specialized products available depending on your environment.
73 73  
74 -If you come to collect your node and it is missing~-~- LOOK FOR IT! It may not have gotten far. We have found dozens of nodes by spending 15 minutes looking for them.
75 -
76 -= External Power =
77 -
78 -Both the 5Hz IGU-16HR and 5s BD3C-5 can be optionally powered via external battery via either a replacement bottom half (the 5Hz nodes) or a battery cable accessory (BD3C-5) using standard lead acid batteries from 9-36v. We have done preliminary testing at 250 Hz with a 12v battery:
79 -
80 -- BD3C-5: ~~2 days of recording per 1 Ah
81 -
82 -- IGU16-HR 3C:  ~~3.5 days of recording per 1 Ah
83 -
84 -- IGU16-HR 1C: ~~7 days of recording per 1 Ah
85 -
86 86  = **Installation** =
87 87  
88 88  (% class="box infomessage" %)
... ... @@ -107,16 +107,18 @@
107 107  == 2. Node Placement ==
108 108  )))
109 109  
90 +**Protection**: Place nodes inside (landfill) biodegradable bags to minimize cleaning and cross-site soil contamination.
91 +
110 110  **Site Analysis**:
111 111  
112 -* **Take compass measurements away from the sensor as it will affect your measurement. Use a stick or shovel to help align.**
113 -* Take photographs from various angles to document the site setup thoroughly. Have a colleague stand next to it pointing at it.
114 -* Include a detailed site description in your notes.
94 +* **Take compass measurements away from the sensor as it will affect your measurement.**
95 +* Take photographs from various angles to document the site setup thoroughly.
96 +* Include a detailed site description in your notes
115 115  
116 116  == 3. GPS Considerations ==
117 117  
118 118  (% class="wikigeneratedid" %)
119 -The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin (2 cm?) layer of soil, but may struggle if the soil layer is too thick. **These nodes will not start recording without attaining a GPS lock** and repeated attempts will excessively drain the battery.
101 +The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. **These nodes will not start recording without attaining a GPS lock** and repeated attempts will excessively drain the battery.
120 120  
121 121  == 4. Visibility and Location Marking ==
122 122  
... ... @@ -124,8 +124,8 @@
124 124  
125 125  **GPS Marking**:
126 126  
127 -* Use a GPS device to mark the instrument's exact location. Most modern cell phones can get to about a 3m error with their internal GPS also; you can probably also get away with investing a few dollars in a good app that shows error and lets you log markers.
128 -* Also write the GPS down on paper (ie your [[LOG SHEET>>http://auspass.edu.au/field/NODES_blank_fieldlog.pdf]]).
109 +* Use a GPS device to mark the instrument's exact location.
110 +* Record this location in both your paper notes and the GPS device.
129 129  
130 130  == (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)5. Charge Time, Pre-Deployment & Post-Deployment(%%) ==
131 131  
... ... @@ -137,14 +137,11 @@
137 137  ** When recording at 250 Hz, with GPS on and Bluetooth disabled, the instruments are expected to last about 30 days per charge cycle. If they are set to run only overnight, this can be extended to 60 days.
138 138  
139 139  * **Post-Retrieval Charging**:
140 -** After retrieval, charge the instruments to about 50-60% (indicated by ORANGE LED) unless they are to be immediately re-deployed or transported.
141 -* **State of Charge (SoC) for Storage**:
142 -** Maintain a battery charge level of around 50-60% (i.e., ORANGE) for storage.
143 -** This charge level is recommended to prevent battery damage, and should be checked every six months.
144 -** Nodes should //__not be stored at full-charge (GREEN), or 0-charge (RED).__//
145 -** Storage at 0-charge damages lithium batteries**.**
146 -* **SoC for Transport:**
147 -** Charge levels for transport will be advised by the freighter. The required SoC will depend on volume and transport method (air, land, sea).
122 +** After retrieval, charge the instruments to about 50-60% (indicated as "orange" level) unless they are to be immediately re-deployed.
123 +* **Storage and Shipping Charge Level**:
124 +** Maintain a battery charge level of around 50-60% (e.g. "orange") for both storage and shipping purposes.
125 +** This charge level is recommended to prevent battery damage and is safe for transportation.
126 +** Nodes should not be stored fully charged, and **they should especially not be stored with 0 charge as this damages lithium batteries.**
148 148  
149 149  (((
150 150  == 6. Data Sharing and Metadata Creation ==
... ... @@ -152,7 +152,7 @@
152 152  
153 153  **GPS Data**:
154 154  
155 -* Ensure you have __carefully documented__ precise lat/lon locations for each station.
134 +* Ensure you have documented precise lat/lon locations for each station and **DOCUMENTED THIS CAREFULLY**
156 156  
157 157  **Photo Sharing**:
158 158  
... ... @@ -225,22 +225,20 @@
225 225  (((
226 226  == 2. Disassembling the Node: ==
227 227  
228 -* For the IGU-16HR, remove the battery section (bottom half) from the sensor by unscrewing the spike section counter-clockwise.
207 +* For the IGU-16HR, remove the battery (bottom half) from the sensor. This is done by unscrewing the spikes counter-clockwise.
229 229  )))
230 230  
231 231  (((
232 232  == 3. Setting Nodes in the Charging Box: ==
233 233  
234 -* Connect to a safe indoor power supply, and turn on (red rocker switch).
235 -* Charging will begin automatically when nodes are inserted in the charging rack.
236 -* Place IGU-16HR battery sections upside-down in the rack, oriented with the terminal connectors.
213 +* Place 1-16 IGU-16HR battery components upside-down into the charger, assuring they are oriented properly.
237 237  )))
238 238  
239 239  (((
240 240  == 4. Monitoring the Charging Process: ==
241 241  
242 -* Lights adjacent to the batteries will illuminate, indicating that charging is underway.
243 -* Observe the transition of the lights from steady RED to ORANGE, then GREEN, and finally to FLASHING GREEN. A flashing green light indicates the batteries are fully charged.
219 +* Once the nodes are set in the charging box and the charging process begins, lights adjacent to the batteries will illuminate. These lights indicate that charging is underway.
220 +* Observe the transition of the lights from steady red to orange, then to green, and finally to flashing green. A flashing green light signifies that the batteries are fully charged. For storage, the goal is to charge them to ORANGE.
244 244  )))
245 245  
246 246  (((
... ... @@ -255,27 +255,12 @@
255 255  
256 256  
257 257  
258 -{{{
259 - }}}
235 +[[image:1706153354750-415.png||data-xwiki-image-style-alignment="center" height="317" width="562"]]
260 260  
261 261  ----
262 262  
263 263  = **Downloading and Converting Seismic Data to MiniSeed Format** =
264 264  
265 -(% class="wikigeneratedid" %)
266 -SmartSolo provides the following powerpoint for SmartSolo node programming and operation. Note that ANSIR only uses a portion of their process for our own uses: [[https:~~/~~/nappe.wustl.edu/smartsolo/files/smartsolo_online_training.pdf>>url:https://nappe.wustl.edu/smartsolo/files/smartsolo_online_training.pdf]]
267 -
268 -== Connection tips: ==
269 -
270 -Connecting SmartSolo nodes to their harvesters and having SoloLite recognise them can be a bit tricky, here are some tricks to help register and program them easier:
271 -
272 -* Place the node on the harvester gently, then firmly press it down onto the pins.
273 -* Place all nodes onto the harvester before trying any troubleshooting, as they may not show up while the SoloLite software is running. Once all are connected, try restarting the software for them to be recognised.
274 -* If a node is refusing to connect, try it with another slot. It is easiest if you place all 16 nodes on the harvester, and swap any nodes that refuse to connect with each other.
275 -* Nodes will likely not show up in the order that they should, though this is not an issue. E.g, a node in slot 6 on the harvester may show up in port 13 in the SoloLite software. Annoying, but it doesn't matter so long as you keep track of what's been harvested!
276 -
277 -
278 -
279 279  == Node Registration and Software Setup ==
280 280  
281 281  1. (((
... ... @@ -294,27 +294,6 @@
294 294  * Ignore the settings for seismic recordings in the subsequent window. Resetting instruments (e.g., sampling rate, gain) requires reprogramming via script.
295 295  )))
296 296  
297 -== File structure ==
298 -
299 -There are essentially three main folders where relevant PROSPECT and PROJECT DATA is stored. Individual projects will be found as subfolders in these.
300 -
301 -=== SOLOLITE ===
302 -
303 -This folder stores SoloLite config files and parameters. Nothing too important stored here, you can always start over and re-create this.
304 -
305 -=== DCCDATA ===
306 -
307 -This folder stores the RAW data you have harvested from the nodes. The data will still be on the nodes (unless you erased it) in case of emergency, but regardless, this is the folder you want to back up and save somewhere.
308 -
309 -If you had a weird time harvesting a node, you can always manually copy it as if it were a USB stick and place it into this folder manually. The structure is: //C:/DCCDATA/prospect_name/project_name/SERIALNUMBER/label(usually a timestamp but can be anything)//
310 -
311 -Then in the SoloLite software, go to tools > Reanalyze Seismic Data
312 -
313 -=== SOLODATA ===
314 -
315 -This folder stores **exported** (e.g. miniseed) data. It is structured similarly. If your DCCDATA is intact, this can always be re-created if need be.
316 -
317 -
318 318  == Data Downloading Process ==
319 319  
320 320  1. (((
... ... @@ -322,7 +322,7 @@
322 322  
323 323  * Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
324 324  * If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
325 -* Select all nodes and right-click to “force download”. This starts the download process.[[image:Smartsolo harvesting #4 copy.png]]
266 +* Select all nodes and right-click to “force download”. This starts the download process.
326 326  * Completed downloads will appear as new folders in the Downloaded Data panel.
327 327  )))
328 328  1. (((
... ... @@ -329,53 +329,16 @@
329 329  **Exporting Data in Readable Format**:
330 330  
331 331  * Go to the “Tool” menu and select “export seismic data”.
332 -* Tailor other parameters to project preference and ensure "Sample Interval" matches the setting used during node reset (note: the standard used by ANU is 4ms, or 250hz)
273 +* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
274 +* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
333 333  * (% class="box warningmessage" %)
334 334  (((
335 -**Ensure export data is set to "COUNTS" (int32), not "mV" (float). This is critical!**
277 +* **Ensure to export data as "COUNTS" (int32), not "mV" (float). This is critical!**
278 +
279 +* **Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.**
336 336  )))
337 -* Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.
338 -* Set "Remove DC" to "Yes" to centre the data around the zero value
339 -* Set the correct Start Time (UTC) and End Time (UTC) of the project to prevent the unnecessary export of older data
340 -* [[image:Smartsolo harvesting #9 copy.png]]
341 -* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
342 -* The data will be exported to the SOLODATA folder. For a windows system, the following file explorer page is where you must navigate to to locate your project folder[[image:Smartsolo harvesting #8 copy.png]]
343 343  )))
344 344  
345 -== Smart Solo IGU-16HR Polarity Notice ==
346 -
347 -See [[5Hz Node Polarity Issues>>https://auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodePolarityIssues]] for discussion. If data is headed to AusPass, we prefer to invert the IGU-16HR channel data manually rather than in the SoloLite software or inverting the response metadata.
348 -
349 -**The BD3C-5 data does not require any sort of polarity inversion.**
350 -
351 -== 18 Leap Second bug ==
352 -
353 -Not so much a //bug// as much as "a thing that can happen if your SoloLite installation is corrupted". If you notice your data has large constant time offsets, you should suspect that the number of leap seconds has not been accounted properly. There is a file "smartsoloconfig.xml" that needs to be present in "C:\SmartSoloApps SoloLite" (e.g. the main program directory) that dictates the leap second offset for the last two data ranges. Since 2017-01-01, this is 18 seconds. At some point in the next few years it will be 19 seconds.
354 -
355 -If this file is missing, just create a new one structured like so, name it "smartsoloconfig.xml" and put it in your main program directory. Then, Reanalyze your data (tools > Reanalyze seismic data) and your data should have the correct time. You can also do this manually, if you want. The offset is 18 seconds precisely.
356 -
357 -{{code language="none"}}
358 -<?xml version="1.0" encoding="UTF-8"?>
359 -<config>
360 - <leapsecond>
361 - <interval>
362 - <start_time>2017-01-01#00:00:00</start_time>
363 - <end_time>2999-12-31#23:59:59</end_time>
364 - <second>18</second>
365 - </interval>
366 - <interval>
367 - <start_time>1970-01-01#00:00:00</start_time>
368 - <end_time>2017-01-01#00:00:00</end_time>
369 - <second>17</second>
370 - </interval>
371 - </leapsecond>
372 - <GPS_distance_threshold_degree>
373 - 4e-5
374 - </GPS_distance_threshold_degree>
375 -</config>
376 -{{/code}}
377 -
378 -
379 379  == Handling Nodes During Download ==
380 380  
381 381  1. (((
... ... @@ -406,8 +406,11 @@
406 406  **Finalizing the Download**:
407 407  
408 408  * After downloading, mark the //"D"// box on your temporary labels to indicate completion.
313 +
314 +
409 409  )))
410 410  
317 +[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
411 411  
412 412  
413 413  
... ... @@ -428,78 +428,23 @@
428 428  
429 429  ----
430 430  
431 -= Instrument Response =
432 -
433 -We are aware that there are various different published responses for these instruments and trust very few of them. One has to be careful with how polarity is handled between groups as well, and if one is working in integer counts (the ANSIR default) or mV (unclear why anyone would use this as it makes file sizes enormous). The response information published below is in **counts** and seems to fit well in huddle tests. Note that the response is the same for all channels and all units (e.g. there are no bespoke calibrations!), all appear to be sample rate insensitive, and the IGU data has been inverted (multiplied by -1) as described here: [[5Hz Node Polarity Issues>>https://auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodePolarityIssues]]
434 -
435 -== IGU 16HR-3C ==
436 -
437 - '16HR3C': {'poles':[(-22.211059+22.217768j), (-22.211059-22.217768j)],
438 - 'zeros':[0j, 0j],
439 - 'gain':1,
440 - 'sensitivity': 257019225.55108312}
441 -
442 -[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:IGU16_Z_huddle.png]]
443 -
444 -[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz bandpass filter>>image:IGU16_N_huddle.png]]
445 -
446 -== IGU 16-1C ==
447 -
448 -The 1C nodes seem to have the same response as the 3-channel IGU-16HR-3C (above), however the response posted at IRIS-NRL seems to imply that there is no poles and zeros information (e.g. a flat/linear response). This is 100% not so.
449 -
450 -[[IGU-16 1C, X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz bandpass filter. Seems to be same response as IGU-16HR-3C.>>image:IGU16_1C_Z_huddle.png]]
451 -
452 -== BD3C-5 ==
453 -
454 - 'BD3C': {'poles':[(-1720.4+0j), (-1.2+0.9j), (-1.2-0.9j)],
455 - 'zeros':[(14164+0j), (-7162+0j), 0j, 0j],
456 - 'gain':1.69726e-05,
457 - 'sensitivity': 702651512.6046528}
458 -
459 -Above 0.5 Hz, the BD3C-5 response fits well:
460 -
461 -[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:BD3C_Z_huddle.0.5.png]]
462 -
463 -[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz bandpass filter>>image:BD3C_N_huddle.0.5.png]]
464 -
465 -(% class="wikigeneratedid" %)
466 -Below the corner frequency (0.2 Hz) the phase response still fares well, but amplitude response may need to be dialed in a bit (it seems a bit high). In the next two figures the filter is **0.1** to 5 Hz:
467 -
468 -
469 -[[BD3C **0.1 **to 5 Hz bandpass filter>>image:BD3C_Z_huddle.0.1.png]]
470 -
471 -[[BD3C **0.1** to 5 Hz bandpass filter>>image:BD3C_N_huddle.0.1.png]]
472 -
473 -== IGU-16 Horizontal noise & how to avoid ==
474 -
475 -The** 5 Hz nodes** are susceptible to horizontal noise due to the placement of geophones in the units, **but this can be mitigated by completely burying the units flush with the ground.** In the below example, the node was set on the floor of our basement set on its plastic carrying case support. As such the amount of horizontal noise noticeably increases above ~~ 10Hz.
476 -
477 -[[IGU-16HR-3C Power spectrum huddle test vs a CMG-6TD (S1) and TC120/Centaur combo. The N and E channels have excess noise above 10Hz due to "sticking up" out of the ground.>>image:IGU16_spectrum.png]]
478 -
479 -(% class="wikigeneratedid" %)
480 -The BD3C-5 nodes do not have this issue:
481 -
482 -[[BD3C-5 test, as above. There is no additional noise on the horizontal channels.>>image:BD3C_psd.png]]
483 -
484 484  = **Cleaning** =
485 485  
486 -When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A stiff plastic brush is helpful to reach areas between the metal spikes on the bottom.
340 +When still connected, the nodes are water resistant (don't submerge them!) and can handle a good spray / wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
487 487  
488 488  = **Weights (for shipping)** =
489 489  
490 490  The weights of bags of nodes, as well as data harvesters and node chargers, are listed below:
491 491  
492 -1 bag + 6*IGU-16HR nodes: 18 kg
346 +1 bag + 6 SP (IGU-16HR) nodes: 18 kg
493 493  
494 -1*IGU-16HR data harvester: 21.5 kg
348 +1 SP (IGU-16HR) data harvester: 21.5 kg
495 495  
496 -1*IGU-16HR charger: 26.3 kg
350 +1 SP (IGU-16HR) charger: 26.3 kg
497 497  
498 -1*BD3C-5 charger (with and without 16 cables): 21 kg / 14.5 kg
352 +1 BB (BD3C-5) charger/data harvester (with and without 16 cables): 21 kg / 14.5 kg
499 499  
500 -1 case + 5*BD3C-5 nodes: 22 kg (aggregate battery weight <5kg, 168Wh)
501 -
502 -1 case + 6*BD3C-5 nodes: 25 kg (aggregate battery weight >5kg, 168Wh)
354 +1 case + 5 BB (BD3C-5) nodes and 6 BB nodes: 22 kg / 25 kg
503 503  )))
504 504  
505 505  (% class="col-xs-12 col-sm-4" %)
... ... @@ -523,7 +523,7 @@
523 523  
524 524  |(% style="width:189px" %)**Frequency Band**|(% style="width:221px" %)5 Seconds to 150Hz
525 525  |(% style="width:189px" %)**Sensitivity**|(% style="width:221px" %)200 V/m/s
526 -|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)Φ158 x160mm(H)
378 +|(% style="width:189px" %)**Size (without spike)**|(% style="width:221px" %)158 x160mm
527 527  |(% style="width:189px" %)**Weight**|(% style="width:221px" %)2.8 kg
528 528  |(% style="width:189px" %)**Data Storage**|(% style="width:221px" %)64 Gb
529 529  |(% style="width:189px" %)**Battery**|(% style="width:221px" %)(((
... ... @@ -542,8 +542,8 @@
542 542  [[image:smartsolo node 2.jpg]]
543 543  
544 544  |(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 1652Hz
545 -|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)76.7 V/m/s
546 -|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm(H)
397 +|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)67.7 V/m/s
398 +|(% style="width:187px" %)**Size (with spike)**|(% style="width:224px" %)103mm(L) × 95mm(W) × 187mm
547 547  |(% style="width:187px" %)**Weight**|(% style="width:224px" %)2.4 kg
548 548  |(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)64 Gb
549 549  |(% style="width:187px" %)**Battery**|(% style="width:224px" %)(((
... ... @@ -555,27 +555,6 @@
555 555  
556 556  (% class="box" %)
557 557  (((
558 -
559 -
560 -= SmartSolo [[IGU-16>>url:https://smartsolo.com/cp-3.html]]1C =
561 -
562 -
563 -[[image:Screenshot 2025-08-01 161027.png]]
564 -
565 -|(% style="width:187px" %)**Frequency Band**|(% style="width:224px" %)5 Hz to 413Hz
566 -|(% style="width:187px" %)**Sensitivity**|(% style="width:224px" %)80 V/m/s
567 -|(% style="width:187px" %)**Size (without spike)**|(% style="width:224px" %)95mm(L) × 103mm(W) × 118mm(H)
568 -|(% style="width:187px" %)**Weight**|(% style="width:224px" %)1.1 kg
569 -|(% style="width:187px" %)**Data Storage**|(% style="width:224px" %)8 Gb
570 -|(% style="width:187px" %)**Battery**|(% style="width:224px" %)(((
571 -Lithium-ion battery contained in equipment (38.48 Wh)
572 -
573 -UN3481 PI967 S2
574 -)))
575 -)))
576 -
577 -(% class="box" %)
578 -(((
579 579  = SmartSolo BD3C-16 Portable Battery Charger =
580 580  
581 581  [[image:20250729_125049.jpg]]
... ... @@ -583,8 +583,8 @@
583 583  |**Dimensions (LxHxW)**|558 x 357 x 300mm
584 584  |**Input rating**|100-210V - 50/60Hz
585 585  |**Power**|1000W
586 -|**Weight**|14.5 kg
587 -|**Weight with cables**|21 kg
417 +|**Weight**|14.5kg
418 +|**Weight with cables**|21kg
588 588  )))
589 589  
590 590  (% class="box" id="HSmartSoloBD3C-16PortableBatteryCharger" %)
... ... @@ -596,8 +596,8 @@
596 596  |**Dimensions (LxHxW)**|625 x 500 x 366mm
597 597  |**Input rating**|100-210V - 50/60Hz
598 598  |**Power**|100W
599 -|**Weight**|21.5 - 24 kg
600 -|**Capacity**|16 nodes
430 +|**Weight**|21.5 - 24kg
431 +|**Slots no.**|16
601 601  |**Download Speed**|20MB/sec/slot
602 602  )))
603 603  
... ... @@ -607,11 +607,11 @@
607 607  
608 608  [[image:20250729_124644.jpg]]
609 609  
610 -|**Dimensions (LxHxW)**|625 x 500 x 366 mm
611 -|**Input rating**|100-210V - 50/60 Hz
612 -|**Power**|640 W
613 -|**Weight**|26.3 kg
614 -|**Capacity**|16 nodes
441 +|**Dimensions (LxHxW)**|625 x 500 x 366mm
442 +|**Input rating**|100-210V - 50/60Hz
443 +|**Power**|640W
444 +|**Weight**|26.3kg
445 +|**Slots no.**|16
615 615  )))
616 616  
617 617  (% class="box" %)
... ... @@ -621,9 +621,9 @@
621 621  [[image:20250729_124957.jpg]]
622 622  
623 623  
624 -|**Dimensions (LxHxW)**|590 x 225 x 405 mm
625 -|**Weight**|8.2 kg
626 -|**Capacity**|6 nodes
455 +|**Dimensions (LxHxW)**|590 x 225 x 405mm
456 +|**Weight**|8.2kg
457 +|**Slots no.**|6
627 627  )))
628 628  
629 629  (% class="box" %)
... ... @@ -633,13 +633,9 @@
633 633  [[image:20250729_124502.jpg]]
634 634  
635 635  |**Dimensions (LxHxW)**|230 x 340 x 310mm
636 -|**Weight**|(((
637 -3.6kg (empty)
638 -
639 -18.0kg (full)
467 +|**Weight**|3.6kg
468 +|**Slots no.**|6
640 640  )))
641 -|**Capacity**|6 nodes
642 -)))
643 643  
644 644  (% class="box" %)
645 645  (((
... ... @@ -649,7 +649,7 @@
649 649  
650 650  |**Dimensions (LxHxW)**|225 x 200 x 550mm
651 651  |**Weight**|
652 -|**Capacity**|8 nodes
479 +|**Slots no.**|6
653 653  )))
654 654  )))
655 655  )))
5Hz_node_programming.labels.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.KB
Size
... ... @@ -1,1 +1,0 @@
1 -109.8 KB
Content
5S_node_programming.labels.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.KB
Size
... ... @@ -1,1 +1,0 @@
1 -114.2 KB
Content
BD3C_N_huddle.0.1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -72.1 KB
Content
BD3C_N_huddle.0.5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
BD3C_N_huddle.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -72.1 KB
Content
BD3C_Z_huddle.0.1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -52.1 KB
Content
BD3C_Z_huddle.0.5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -64.6 KB
Content
BD3C_Z_huddle.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -52.1 KB
Content
BD3C_psd.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -73.7 KB
Content
IGU16_1C_Z_huddle.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -72.3 KB
Content
IGU16_N_huddle.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -65.7 KB
Content
IGU16_Z_huddle.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -67.4 KB
Content
IGU16_spectrum.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.robert
Size
... ... @@ -1,1 +1,0 @@
1 -65.0 KB
Content
Screenshot 2025-08-01 161027.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -82.8 KB
Content
Smartsolo harvesting #4 copy.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
Smartsolo harvesting #4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -33.8 KB
Content
Smartsolo harvesting #6 copy.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -33.6 KB
Content
Smartsolo harvesting #8 copy.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -38.3 KB
Content
Smartsolo harvesting #8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -60.0 KB
Content
Smartsolo harvesting #9 copy.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.JackD
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content