Skip to Content
Last modified by robert on 2026/06/29 16:42
From version 112.1
edited by robert
on 2026/06/17 16:54
Change comment: There is no comment for this version
To version 110.16
edited by Jack Dent
on 2026/06/15 10:57
Change comment: (Autosaved)

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.JackD
Content
... ... @@ -73,16 +73,6 @@
73 73  
74 74  If you come to collect your node and it is missing~-~- LOOK FOR IT! It may not have gotten far. We have found dozens of nodes by spending 15 minutes looking for them.
75 75  
76 -= External Power =
77 -
78 -Both the 5Hz IGU-16HR and 5s BD3C-5 can be optionally powered via external battery via either a replacement bottom half (the 5Hz nodes) or a battery cable accessory (BD3C-5) using standard lead acid batteries from 9-36v. We have done preliminary testing at 250 Hz with a 12v battery:
79 -
80 -- BD3C-5: ~~2 days of recording per 1 Ah
81 -
82 -- IGU16-HR 3C:  ~~3.5 days of recording per 1 Ah
83 -
84 -- IGU16-HR 1C: ~~7 days of recording per 1 Ah
85 -
86 86  = **Installation** =
87 87  
88 88  (% class="box infomessage" %)
... ... @@ -109,14 +109,14 @@
109 109  
110 110  **Site Analysis**:
111 111  
112 -* **Take compass measurements away from the sensor as it will affect your measurement. Use a stick or shovel to help align.**
113 -* Take photographs from various angles to document the site setup thoroughly. Have a colleague stand next to it pointing at it.
114 -* Include a detailed site description in your notes.
102 +* **Take compass measurements away from the sensor as it will affect your measurement.**
103 +* Take photographs from various angles to document the site setup thoroughly.
104 +* Include a detailed site description in your notes
115 115  
116 116  == 3. GPS Considerations ==
117 117  
118 118  (% class="wikigeneratedid" %)
119 -The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin (2 cm?) layer of soil, but may struggle if the soil layer is too thick. **These nodes will not start recording without attaining a GPS lock** and repeated attempts will excessively drain the battery.
109 +The GPS antenna is at the top and center of the unit, and will (usually) only receive signal with a clear sky view directly above. The signal is able to penetrate plastic and terracotta planters and a thin layer of soil, but may struggle if the soil layer is too thick. **These nodes will not start recording without attaining a GPS lock** and repeated attempts will excessively drain the battery.
120 120  
121 121  == 4. Visibility and Location Marking ==
122 122  
... ... @@ -124,8 +124,8 @@
124 124  
125 125  **GPS Marking**:
126 126  
127 -* Use a GPS device to mark the instrument's exact location. Most modern cell phones can get to about a 3m error with their internal GPS also; you can probably also get away with investing a few dollars in a good app that shows error and lets you log markers.
128 -* Also write the GPS down on paper (ie your [[LOG SHEET>>http://auspass.edu.au/field/NODES_blank_fieldlog.pdf]]).
117 +* Use a GPS device to mark the instrument's exact location.
118 +* Record this location in both your paper notes and the GPS device.
129 129  
130 130  == (% style="color:inherit; font-family:inherit; font-size:max(18px, min(20px, 14.4444px + 0.462963vw))" %)5. Charge Time, Pre-Deployment & Post-Deployment(%%) ==
131 131