Skip to Content
Last modified by robert on 2026/06/29 16:42
From version 110.2
edited by Jack Dent
on 2026/06/15 09:47
Change comment: (Autosaved)
To version 110.1
edited by Jack Dent
on 2026/06/15 09:18
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -320,16 +320,18 @@
320 320  
321 321  * Go to the “Tool” menu and select “export seismic data”.
322 322  * Tailor other parameters to project preference and ensure "Sample Interval" matches the setting used during node reset.
323 -* **Ensure export data is set to "COUNTS" (int32), not "mV" (float). This is critical!**
324 -* Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.
325 -Set 'Remove DC' to 'Yes' to centre the data around the zero value
326 -Set the correct Start Time (UTC) and End Time (UTC) of the project to prevent the unnecessary export of older data
327 -* [[image:Smartsolo harvesting #9 copy.png]]
323 +* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
328 328  * (% class="box warningmessage" %)
329 329  (((
326 +* **Ensure to export data as "COUNTS" (int32), not "mV" (float). This is critical!**
327 +
328 +* **Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.**
329 +* **Set 'Remove DC' to 'Yes' to centre the data around the zero value**
330 +* **Set the correct Start Time (UTC) and End Time (UTC) of the project to prevent the unnecessary export of old data**
331 +
330 330  
331 -)))Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
332 332  )))
334 +)))
333 333  
334 334  == Smart Solo IGU-16HR Polarity Notice ==
335 335  
Smartsolo harvesting #9 copy.png
Size
... ... @@ -1,1 +1,1 @@
1 -28.7 KB
1 +33.5 KB
Content