Changes for page SmartSolo Node Seismometers
Last modified by robert on 2026/06/29 16:42
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -320,18 +320,16 @@ 320 320 321 321 * Go to the “Tool” menu and select “export seismic data”. 322 322 * Tailor other parameters to project preference and ensure "Sample Interval" matches the setting used during node reset. 323 -* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left. 323 +* **Ensure export data is set to "COUNTS" (int32), not "mV" (float). This is critical!** 324 +* Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes. 325 +Set 'Remove DC' to 'Yes' to centre the data around the zero value 326 +Set the correct Start Time (UTC) and End Time (UTC) of the project to prevent the unnecessary export of older data 327 +* [[image:Smartsolo harvesting #9 copy.png]] 324 324 * (% class="box warningmessage" %) 325 325 ((( 326 -* **Ensure to export data as "COUNTS" (int32), not "mV" (float). This is critical!** 327 - 328 -* **Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.** 329 -* **Set 'Remove DC' to 'Yes' to centre the data around the zero value** 330 -* **Set the correct Start Time (UTC) and End Time (UTC) of the project to prevent the unnecessary export of old data** 331 - 332 332 331 +)))Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left. 333 333 ))) 334 -))) 335 335 336 336 == Smart Solo IGU-16HR Polarity Notice == 337 337
- Smartsolo harvesting #9 copy.png
-
- Size
-
... ... @@ -1,1 +1,1 @@ 1 - 33.5KB1 +28.7 KB - Content