Skip to Content
Last modified by robert on 2026/06/29 16:42
From version 108.1
edited by robert
on 2026/02/18 14:46
Change comment: There is no comment for this version
To version 110.3
edited by Jack Dent
on 2026/06/15 09:52
Change comment: (Autosaved)

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.JackD
Content
... ... @@ -312,7 +312,7 @@
312 312  
313 313  * Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
314 314  * If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
315 -* Select all nodes and right-click to “force download”. This starts the download process.
315 +* Select all nodes and right-click to “force download”. This starts the download process.[[image:Smartsolo harvesting #4 copy.png]]
316 316  * Completed downloads will appear as new folders in the Downloaded Data panel.
317 317  )))
318 318  1. (((
... ... @@ -319,14 +319,17 @@
319 319  **Exporting Data in Readable Format**:
320 320  
321 321  * Go to the “Tool” menu and select “export seismic data”.
322 -* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
323 -* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
322 +* Tailor other parameters to project preference and ensure "Sample Interval" matches the setting used during node reset.
324 324  * (% class="box warningmessage" %)
325 325  (((
326 -* **Ensure to export data as "COUNTS" (int32), not "mV" (float). This is critical!**
327 -
328 -* **Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.**
325 +**Ensure export data is set to "COUNTS" (int32), not "mV" (float). This is critical!**
329 329  )))
327 +* Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.
328 +* Set 'Remove DC' to 'Yes' to centre the data around the zero value
329 +* Set the correct Start Time (UTC) and End Time (UTC) of the project to prevent the unnecessary export of older data
330 +* [[image:Smartsolo harvesting #9 copy.png]]
331 +* Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
332 +* The data will be exported to the SOLODATA folder. For a windows system, the following file explorer page is where you must navigate to to locate your project folder
330 330  )))
331 331  
332 332  == Smart Solo IGU-16HR Polarity Notice ==
... ... @@ -393,11 +393,8 @@
393 393  **Finalizing the Download**:
394 394  
395 395  * After downloading, mark the //"D"// box on your temporary labels to indicate completion.
396 -
397 -
398 398  )))
399 399  
400 -[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
401 401  
402 402  
403 403  
... ... @@ -453,7 +453,7 @@
453 453  [[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz bandpass filter>>image:BD3C_N_huddle.0.5.png]]
454 454  
455 455  (% class="wikigeneratedid" %)
456 -Below the corner frequency 0.2 Hz (5 seconds) the response still does a good job, but may need to be dialed in a bit. In the next two figures the filter is 0.1 to 5 Hz. We are looking into this..
456 +Below the corner frequency (0.2 Hz) the phase response still fares well, but amplitude response may need to be dialed in a bit (it seems a bit high). In the next two figures the filter is **0.1** to 5 Hz:
457 457  
458 458  
459 459  [[BD3C **0.1 **to 5 Hz bandpass filter>>image:BD3C_Z_huddle.0.1.png]]
Smartsolo harvesting #4 copy.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
Smartsolo harvesting #4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
Smartsolo harvesting #6 copy.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +33.6 KB
Content
Smartsolo harvesting #9 copy.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content