Skip to Content
Last modified by robert on 2026/02/27 19:58
From version 105.2
edited by robert
on 2026/02/17 12:43
Change comment: There is no comment for this version
To version 104.1
edited by robert
on 2026/02/16 18:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,12 +6,10 @@
6 6  
7 7  ANSIR supply two types of three-channel nodes, and one type of one-channel node:
8 8  
9 -* **SmartSolo IGU-16HR 3C (5 Hz, 'very' short period)**
9 +* **SmartSolo IGU 16HR 3C (5 Hz, 'very' short period)**
10 10  * **SmartSolo BD3C-5 (5 second, short period)**
11 -* **SmartSolo IGU-16 1C (5 Hz, 'very' short period, single channel. Not 'HR')**
11 +* **SmartSolo IGU 16 1C (5 Hz, 'very' short period, single channel)**
12 12  
13 -Visit the [[SmartSolo page>>https://smartsolo.com/igu.html]] for more detail.
14 -
15 15  The three-channel nodes have a theoretical battery capacity of ~~30 days, whereas the single-channel type has a capacity of ~~50 days. The programming, operation and downloading procedures for all types of SmartSolo nodes are also similar.
16 16  
17 17  (% class="box infomessage" %)
... ... @@ -429,9 +429,9 @@
429 429   'gain':1,
430 430   'sensitivity': 257019225.55108312}
431 431  
432 -[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:IGU16_Z_huddle.png]]
430 +[[X axis is samples (.01 s), Y axis is velocity (m/s)>>image:IGU16_Z_huddle.png]]
433 433  
434 -[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:IGU16_N_huddle.png]]
432 +[[X axis is samples (.01 s), Y axis is velocity (m/s)>>image:IGU16_N_huddle.png]]
435 435  
436 436  == IGU 16-1C ==
437 437  
... ... @@ -450,11 +450,11 @@
450 450  
451 451  The 5 Hz nodes are susceptible to horizontal noise due to the placement of geophones in the units, **but this can be mitigated by completely burying the units flush with the ground.** In the below example, the node was set on the floor of our basement set on its plastic carrying case support. As such the amount of horizontal noise noticeably increases above ~~ 10Hz.
452 452  
453 -[[Power spectrum huddle test vs a CMG-6TD (S1) and TC120/Centaur combo. The N and E channels have excess noise above 10Hz due to "sticking up" out of the ground.>>image:IGU16_spectrum.png]]
451 +[[Power spectrum huddle test vs a CMG-6TD (S1) and TC120/Centaur combo, all filtered 0.5-5 Hz. The N and E channels have excess noise above 10Hz due to "sticking up" out of the ground.>>image:IGU16_spectrum.png]]
454 454  
455 455  = **Cleaning** =
456 456  
457 -When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A stiff plastic brush is helpful to reach areas between the metal spikes on the bottom.
455 +When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
458 458  
459 459  = **Weights (for shipping)** =
460 460