Skip to Content
Last modified by robert on 2026/02/27 19:58
From version 103.1
edited by robert
on 2026/02/16 17:55
Change comment: There is no comment for this version
To version 105.2
edited by robert
on 2026/02/17 12:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,10 +6,12 @@
6 6  
7 7  ANSIR supply two types of three-channel nodes, and one type of one-channel node:
8 8  
9 -* **SmartSolo IGU 16HR 3C (5 Hz, 'very' short period)**
9 +* **SmartSolo IGU-16HR 3C (5 Hz, 'very' short period)**
10 10  * **SmartSolo BD3C-5 (5 second, short period)**
11 -* **SmartSolo IGU 16 1C (5 Hz, 'very' short period, single channel)**
11 +* **SmartSolo IGU-16 1C (5 Hz, 'very' short period, single channel. Not 'HR')**
12 12  
13 +Visit the [[SmartSolo page>>https://smartsolo.com/igu.html]] for more detail.
14 +
13 13  The three-channel nodes have a theoretical battery capacity of ~~30 days, whereas the single-channel type has a capacity of ~~50 days. The programming, operation and downloading procedures for all types of SmartSolo nodes are also similar.
14 14  
15 15  (% class="box infomessage" %)
... ... @@ -427,12 +427,14 @@
427 427   'gain':1,
428 428   'sensitivity': 257019225.55108312}
429 429  
430 -[[X axis is samples (.01 s), Y axis is velocity (m/s)>>image:IGU16_Z_huddle.png]]
432 +[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:IGU16_Z_huddle.png]]
431 431  
432 -[[X axis is samples (.01 s), Y axis is velocity (m/s)>>image:IGU16_N_huddle.png]]
434 +[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:IGU16_N_huddle.png]]
433 433  
434 434  == IGU 16-1C ==
435 435  
438 +The 1C nodes seem to have a slightly different response to the 3C (TBA)
439 +
436 436  == BD3C-5 ==
437 437  
438 438   'BD3C': {'poles':[(-1720.4+0j), (-1.2+0.9j), (-1.2-0.9j)],
... ... @@ -440,15 +440,17 @@
440 440   'gain':1.69726e-05,
441 441   'sensitivity': 702651512.6046528}
442 442  
447 +*image TBA but they have been created in the past~-~- we are 100% confident our published responses are correct
448 +
443 443  == Horizontal noise & how to avoid ==
444 444  
445 445  The 5 Hz nodes are susceptible to horizontal noise due to the placement of geophones in the units, **but this can be mitigated by completely burying the units flush with the ground.** In the below example, the node was set on the floor of our basement set on its plastic carrying case support. As such the amount of horizontal noise noticeably increases above ~~ 10Hz.
446 446  
447 -[[Power spectrum huddle test vs a CMG-6TD (S1) and TC120/Centaur combo, all filtered 0.5-5 Hz. The N and E channels have excess noise above 10Hz due to "sticking up" out of the ground.>>image:IGU16_spectrum.png]]
453 +[[Power spectrum huddle test vs a CMG-6TD (S1) and TC120/Centaur combo. The N and E channels have excess noise above 10Hz due to "sticking up" out of the ground.>>image:IGU16_spectrum.png]]
448 448  
449 449  = **Cleaning** =
450 450  
451 -When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
457 +When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A stiff plastic brush is helpful to reach areas between the metal spikes on the bottom.
452 452  
453 453  = **Weights (for shipping)** =
454 454