Skip to Content
Last modified by robert on 2026/06/29 16:42
From version 102.1
edited by robert
on 2026/02/16 17:44
Change comment: There is no comment for this version
To version 110.1
edited by Jack Dent
on 2026/06/15 09:18
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.JackD
Content
... ... @@ -6,10 +6,12 @@
6 6  
7 7  ANSIR supply two types of three-channel nodes, and one type of one-channel node:
8 8  
9 -* **SmartSolo IGU 16HR 3C (5 Hz, 'very' short period)**
9 +* **SmartSolo IGU-16HR 3C (5 Hz, 'very' short period)**
10 10  * **SmartSolo BD3C-5 (5 second, short period)**
11 -* **SmartSolo IGU 16 1C (5 Hz, 'very' short period, single channel)**
11 +* **SmartSolo IGU-16 1C (5 Hz, 'very' short period, single channel. Not 'HR')**
12 12  
13 +Visit the [[SmartSolo page>>https://smartsolo.com/igu.html]] for more detail.
14 +
13 13  The three-channel nodes have a theoretical battery capacity of ~~30 days, whereas the single-channel type has a capacity of ~~50 days. The programming, operation and downloading procedures for all types of SmartSolo nodes are also similar.
14 14  
15 15  (% class="box infomessage" %)
... ... @@ -310,7 +310,7 @@
310 310  
311 311  * Once a new project is created, the Data Transfer View panel will display connected nodes with details like series number and data size.
312 312  * If “Prospect not matched” appears, it simply means the new project doesn’t match the original programming project. This is not a concern.
313 -* Select all nodes and right-click to “force download”. This starts the download process.
315 +* Select all nodes and right-click to “force download”. This starts the download process.[[image:Smartsolo harvesting #4 copy.png]]
314 314  * Completed downloads will appear as new folders in the Downloaded Data panel.
315 315  )))
316 316  1. (((
... ... @@ -317,7 +317,7 @@
317 317  **Exporting Data in Readable Format**:
318 318  
319 319  * Go to the “Tool” menu and select “export seismic data”.
320 -* Tailor other parameters to personal preference and ensure "Sample Interval" matches the setting used during node reset.
322 +* Tailor other parameters to project preference and ensure "Sample Interval" matches the setting used during node reset.
321 321  * Click “prepare” followed by “run” to start reformatting. Monitor this process in the small panel at the bottom left.
322 322  * (% class="box warningmessage" %)
323 323  (((
... ... @@ -324,6 +324,10 @@
324 324  * **Ensure to export data as "COUNTS" (int32), not "mV" (float). This is critical!**
325 325  
326 326  * **Set "Remove Gain" to the same decibel gain as during programming. By default ANU sets this to 24db for short period nodes (a scaling factor of 15.848932), and 6db (a factor of 2.0) for broadband nodes.**
329 +* **Set 'Remove DC' to 'Yes' to centre the data around the zero value**
330 +* **Set the correct Start Time (UTC) and End Time (UTC) of the project to prevent the unnecessary export of old data**
331 +
332 +
327 327  )))
328 328  )))
329 329  
... ... @@ -391,11 +391,8 @@
391 391  **Finalizing the Download**:
392 392  
393 393  * After downloading, mark the //"D"// box on your temporary labels to indicate completion.
394 -
395 -
396 396  )))
397 397  
398 -[[image:1706153266647-145.png||data-xwiki-image-style-alignment="center" height="340" width="603"]]
399 399  
400 400  
401 401  
... ... @@ -418,9 +418,9 @@
418 418  
419 419  = Instrument Response =
420 420  
421 -We are aware that there are various different published responses for these instruments and trust very few of them. One has to be careful with how polarity is handled between groups as well, as well as if one is working in integer counts (the ANSIR default) or mV (why anyone uses this is beyond our comprehension). The response information published below is in counts and seems to fit well in huddle tests. Note that these all appear to be sample rate insensitive, and the IGU data has been inverted (multiplied by -1) as described here: [[5Hz Node Polarity Issues>>https://auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodePolarityIssues]]
424 +We are aware that there are various different published responses for these instruments and trust very few of them. One has to be careful with how polarity is handled between groups as well, and if one is working in integer counts (the ANSIR default) or mV (unclear why anyone would use this as it makes file sizes enormous). The response information published below is in **counts** and seems to fit well in huddle tests. Note that the response is the same for all channels and all units (e.g. there are no bespoke calibrations!), all appear to be sample rate insensitive, and the IGU data has been inverted (multiplied by -1) as described here: [[5Hz Node Polarity Issues>>https://auspass.edu.au/xwiki/bin/view/Data/AusPass%20Data/#HSmartSoloNodePolarityIssues]]
422 422  
423 -== IGU16-3C ==
426 +== IGU 16HR-3C ==
424 424  
425 425   '16HR3C': {'poles':[(-22.211059+22.217768j), (-22.211059-22.217768j)],
426 426   'zeros':[0j, 0j],
... ... @@ -427,12 +427,16 @@
427 427   'gain':1,
428 428   'sensitivity': 257019225.55108312}
429 429  
430 -[[Caption>>image:IGU16_Z_huddle.png]]
433 +[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:IGU16_Z_huddle.png]]
431 431  
432 -[[Caption>>image:IGU16_N_huddle.png]]
435 +[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz bandpass filter>>image:IGU16_N_huddle.png]]
433 433  
434 -== IGU16-1C ==
437 +== IGU 16-1C ==
435 435  
439 +The 1C nodes seem to have the same response as the 3-channel IGU-16HR-3C (above), however the response posted at IRIS-NRL seems to imply that there is no poles and zeros information (e.g. a flat/linear response). This is 100% not so.
440 +
441 +[[IGU-16 1C, X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz bandpass filter. Seems to be same response as IGU-16HR-3C.>>image:IGU16_1C_Z_huddle.png]]
442 +
436 436  == BD3C-5 ==
437 437  
438 438   'BD3C': {'poles':[(-1720.4+0j), (-1.2+0.9j), (-1.2-0.9j)],
... ... @@ -440,15 +440,34 @@
440 440   'gain':1.69726e-05,
441 441   'sensitivity': 702651512.6046528}
442 442  
443 -== Horizontal noise & how to avoid ==
450 +Above 0.5 Hz, the BD3C-5 response fits well:
444 444  
445 -The 5 Hz nodes are susceptible to horizontal noise due to the placement of geophones in the units, **but this can be mitigated by completely burying the units flush with the ground.** In the below example, the node was set on the floor of our basement set on its plastic carrying case support. As such the amount of horizontal noise noticeably increases above ~~ 10Hz.
452 +[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz filter>>image:BD3C_Z_huddle.0.5.png]]
446 446  
447 -[[Power spectrum huddle test vs a CMG-6TD (S1) and TC120/Centaur combo, all filtered 0.5-5 Hz. The N and E channels have excess noise above 10Hz due to "sticking up" out of the ground.>>image:IGU16_spectrum.png]]
454 +[[X axis is samples (.01 s), Y axis is velocity (m/s), 0.5-5 Hz bandpass filter>>image:BD3C_N_huddle.0.5.png]]
448 448  
456 +(% class="wikigeneratedid" %)
457 +Below the corner frequency (0.2 Hz) the phase response still fares well, but amplitude response may need to be dialed in a bit (it seems a bit high). In the next two figures the filter is **0.1** to 5 Hz:
458 +
459 +
460 +[[BD3C **0.1 **to 5 Hz bandpass filter>>image:BD3C_Z_huddle.0.1.png]]
461 +
462 +[[BD3C **0.1** to 5 Hz bandpass filter>>image:BD3C_N_huddle.0.1.png]]
463 +
464 +== IGU-16 Horizontal noise & how to avoid ==
465 +
466 +The** 5 Hz nodes** are susceptible to horizontal noise due to the placement of geophones in the units, **but this can be mitigated by completely burying the units flush with the ground.** In the below example, the node was set on the floor of our basement set on its plastic carrying case support. As such the amount of horizontal noise noticeably increases above ~~ 10Hz.
467 +
468 +[[IGU-16HR-3C Power spectrum huddle test vs a CMG-6TD (S1) and TC120/Centaur combo. The N and E channels have excess noise above 10Hz due to "sticking up" out of the ground.>>image:IGU16_spectrum.png]]
469 +
470 +(% class="wikigeneratedid" %)
471 +The BD3C-5 nodes do not have this issue:
472 +
473 +[[BD3C-5 test, as above. There is no additional noise on the horizontal channels.>>image:BD3C_psd.png]]
474 +
449 449  = **Cleaning** =
450 450  
451 -When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A strong, non-wire brush is helpful to reach areas between the metal spikes on the bottom.
477 +When assembled, the nodes are water resistant but not submersible. They can handle a good spray and wipe-down. A stiff plastic brush is helpful to reach areas between the metal spikes on the bottom.
452 452  
453 453  = **Weights (for shipping)** =
454 454  
BD3C_N_huddle.0.1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +72.1 KB
Content
BD3C_N_huddle.0.5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +73.3 KB
Content
BD3C_N_huddle.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +72.1 KB
Content
BD3C_Z_huddle.0.1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +52.1 KB
Content
BD3C_Z_huddle.0.5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +64.6 KB
Content
BD3C_Z_huddle.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +52.1 KB
Content
BD3C_psd.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +73.7 KB
Content
IGU16_1C_Z_huddle.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.robert
Size
... ... @@ -1,0 +1,1 @@
1 +72.3 KB
Content
Smartsolo harvesting #4 copy.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
Smartsolo harvesting #4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
Smartsolo harvesting #6 copy.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +33.6 KB
Content
Smartsolo harvesting #9 copy.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +33.5 KB
Content