Skip to Content
Version 6.2 by Sima Mousavi on 2024/01/29 11:57
Hide last authors
Sima Mousavi 5.1 1 === **Silixa iDAS Setup Manual for Reoccupying/Duplicating Experiment** ===
2
3 ----
4
5 ==== **General Information** ====
6
7 * **Experiment Name:** ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~__
8 * **Local Date:** ~_~_~_~_/~_~__**/202**
9 * **Local Time:** ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~__
10 * **Personnel:** ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
11 * **Site Condition Notes:**
12 ** [Space for detailed notes about the site condition, any upkeep performed, and changes made since the last visit.]
13
14 ----
15
16 ==== **Setup Procedure** ====
17
18 1. (((
19 **Open iDAS Box**
20
21 * Serial Number: ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~__
22 * IP Address: ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
23 )))
24 1. (((
25 **Check Laser Lock**
26
27 * Ensure the lever on the LASER/RIGHT side of the iDAS is in the locked position (LEVER UP).
28 )))
29 1. (((
30 **Placement of iDAS**
31
32 * Position the iDAS on a stable surface.
33 * Ensure clear air flow around the fan vents.
34 )))
35 1. (((
36 **UPS Setup** (If applicable)
37
38 * Connect the UPS to a power source.
39 * Plug the NAS into the UPS using the special cable with a rectangular connector.
40 * Connect the monitor to the UPS.
41 )))
42 1. (((
43 **Peripheral Connections**
44
45 * Connect a computer monitor, mouse, and keyboard to the iDAS.
46 )))
47 1. (((
48 **GPS Antenna Connection**
49
50 * Connect the GPS antenna to the left-side socket on the front of the iDAS using a special adapter.
51 )))
52 1. (((
53 **Fibre Optic Connection**
54
55 * Clean both the fibre optic cable and the socket with a 1-click cleaner before connection.
56 * Use the guide/tip for cleaning the fibre and clean the socket without it.
57 )))
58 1. (((
59 **Powering the iDAS**
60
61 * Connect the iDAS to a power socket or UPS.
62 * Note: The iDAS turns on automatically when connected to power. Use the power button at the bottom left if it does not.
63 )))
64 1. (((
65 **Network Drive Mapping**
66
67 * Open File Explorer and select 'This PC' from the left pane.
68 * On the File Explorer ribbon, select 'More' > 'Map network drive'.
69 * Choose a drive letter from the 'Drive' list.
70 )))
71 1. (((
72 **Open iDAS Software**
73
74 * Use the link/shortcut on the Desktop.
75 )))
76 1. (((
77 **GPS Satellite Confirmation**
78
79 * Check for a green light in the top row of the software interface indicating GPS satellite detection.
80 )))
81 1. (((
82 **Lever/Interlock Adjustment**
83
84 * Lower the lever/interlock (as mentioned in step 2) before starting data acquisition.
85 )))
86 1. (((
87 **Configuration File Duplication**
88
89 * Use 'current.cfg' for duplicating previous setup.
90 * The file is located at C:/Silixa/Data/current.cfg.
91 * Copy this file to the desktop and save it with a new filename.
92 )))
93 1. (((
94 **iDAS Configuration Settings**
95
96 * Navigate to the 'Configuration' tab and click 'iDAS configuration'.
97 * Check all values under 'system'.
98 * Under 'application', enable error messages.
99 * In 'saving', select 'acoustic saving', choose 'tdms', and set the file save location and identifier.
100 * Leave default parameters in 'measure'.
101 )))
102 1. (((
103 **Mode Selection**
104
105 * Toggle between Acoustic mode, Waterfall mode, and OTDR mode to check data recording.
106 )))
107 1. (((
108 **Photograph OTDR Mode**
109
110 * Document the OTDR mode settings with a photograph.
111 )))
112 1. (((
113 **Photograph Waterfall Mode**
114
115 * Similarly, take a picture of the Waterfall mode settings.
116 )))
117 1. (((
118 **Configuration File Saving**
119
120 * Save the configuration file in .cfg format in a separate location without overwriting the existing one.
121 )))
122 1. (((
123 **Software Check**
124
125 * Ensure QFinder, Teamviewer, and Microsoft Remote Desktop are installed.
126 )))
127 1. (((
128 **Remote Access Setup**
129
130 * Open Teamviewer or Microsoft Remote Desktop.
131 * For Teamviewer, photograph the ID and password and ensure it remains open.
132 * For Microsoft Remote Desktop, record the IP address and test remote access with a separate laptop.
133 )))
134 1. (((
135 **Final Mode Setting**
136
137 * Switch to OTDR mode for ongoing operation (avoids excessive memory usage of Waterfall mode).
138 )))
139
140 ----
141
142 ==== **Important Reminders** ====
143
144 * Always ensure that the iDAS is connected to a suitably earthed power socket or UPS for safety.
145 * Regularly check the condition of all cables and connectors.
146 * Before leaving the setup, confirm that data saving is active if required.
147 * Keep a log of all actions taken during the setup for future reference and troubleshooting.
Sima Mousavi 6.1 148
149
150
151
Sima Mousavi 6.2 152 [[image:1706489800616-982.png]]
Sima Mousavi 6.1 153
Sima Mousavi 6.2 154
155
Sima Mousavi 6.1 156 [[image:1706488566274-805.png]]
157
158
159
160
Sima Mousavi 6.2 161 [[Caption>>image:1706488806394-168.png]]
Sima Mousavi 6.1 162
163
164 [[image:https://photos.fife.usercontent.google.com/pw/ABLVV86phmYsze0lp1yzL-gs6stE23rmgKbOxcpCRhFmK9s25zf5UHBkgbFcOg=w1440-h2556-s-no-gm?authuser=0]]
165
166
167
Sima Mousavi 6.2 168 [[How to clean the optical connector>>image:1706488909085-143.png||alt="How to clean the optical connector"]]
Sima Mousavi 6.1 169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184