Wiki source code of ANU Seismic Data Loggers

Version 34.1 by Jack Dent on 2024/12/19 13:23

version	line-number	content
1.1	1	(% class="row" %)
	2	(((
	3	(% class="col-xs-12 col-sm-8" %)
	4	(((
	5	(% class="jumbotron" %)
	6	(((
	7	(% class="container" %)
	8	(((
23.1	9	ANU has designed and built three generations of seismic data recorders, two of which (the small yellow TerraSAWR and the larger beige LPR-200) are still in use today. Despite their contrasting appearance, they both use the same software, data cards, and have the same instrument response.
1.1	10	)))
	11	)))
	12
15.1	13	= Data Card Formatting and Information =
	14
26.2	15	Both the TerraSAWR and LPR-200 require SD Cards to be formatted in FAT32 filesystem. For 64Gb cards it can be difficult to format in FAT32, but [[software >>http://auspass.edu.au/field/fat32cardformatter.exe]]is available. ANU recommend SanDisk Extreme 150 mb/s cards in either 32 or 64Gb size. We strongly discourage using cards larger than 64Gb, and in general smaller cards are less likely to fail. We have also found that "adapter" cards (e.g. SD to microSD) are prone to having write issues and strongly advise against them.
15.1	16
26.2	17	The loggers can be "pre-programmed" with information (e.g. site name, sampling rate, etc) or they can be programmed in the field using the buttons on the logger. To pre-program the cards you simply edit a text file (named "[[ANUSRSetup.txt>>http://auspass.edu.au/field/ANUSRSetup.txt]]" for the LPRs, or "[[tSAWRSetup.txt>>http://auspass.edu.au/field/tSAWRSetup.txt]]" for the TerraSAWRs) and place it in the root directory on the SDCard. When the logger boots up, it will parse and load this information.
24.1	18
29.1	19	=== The format for ANUSRSetup.txt / LPR200s will be a single line of text that looks like this: ===
24.1	20
25.1	21	{{{XXX195G0100010034864 2 }}}
24.1	22
	23	corresponding to site XXX19,
	24	network 5G,
29.1	25	sample rate 0100, (i.e. 100 Hz)
24.1	26	"gps interval" 01 (once per hour~-~- don't change),
	27	start mode (always 0),
	28	stop mode (always 0),
31.2	29	seismometer type (3 = broadband (+/- 20V), 2 = Guralp (+/- 10V), 1 = shortperiod (+/- 5V),
24.1	30	and seismometer serial number (4864).
	31
29.1	32	(% class="box warningmessage" %)
	33	(((
31.3	34	NOTE: the 2 at the very end is for "RECORD ON RESTART". The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume. (# of blank spaces before this doesn't matter)
29.1	35	)))
24.1	36
31.4	37	=== The format for TSAWR loggers is shorter: ===
24.1	38
31.2	39	(% class="box errormessage" %)
	40	(((
	41	NOTE: The format is shorter as they don't have an option to set the "GPS sync". The GPS sync number should be omitted otherwise the formatting will not work!
	42	)))
24.1	43
31.2	44	SITE15G02500039999 2
	45
33.1	46	corresponding to site SITE1,
31.2	47
	48	network 5G
29.1	49	sample rate 0250, (i.e. 250 Hz)
	50	start mode (always 0),
	51	stop mode (always 0),
31.2	52	seismometer type (3 = broadband (+/- 20V), 2 = Guralp (+/- 10V), 1 = shortperiod (+/- 5V),
29.1	53	and seismometer serial number (9999).
24.1	54
29.1	55
	56	=== The formatting process using the logger: ===
	57
30.1	58	The process for formatting an SD card within the logger is straightforward. Navigate to the "SD INFORMATION" screen and press ERASE SD CARD. This process may take up to a minute. This will result in erasing all files from the card. Upon starting recording, a new 'seed' will be written containing all the information that the logger has been set with FINISH THIS SECTION
29.1	59
34.1	60	[[image:original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg\|\|height="240" width="298"]]
29.1	61
24.1	62	Here is a general guideline for how much data you can expect to fit on a card:
	63
	64	{{{ 64Gb card: 245 days @ 250hz or 610 days @ 100hz
31.1	65	32Gb card: 122 days @ 250hz or 305 days @ 100hz
	66	}}}
24.1	67
	68
31.1	69	= Logger Menus Overview (and setup) =
24.1	70
31.4	71	The same menus are used in both types of loggers.
	72
31.1	73	== System Information ==
	74
	75	This menu provides an overview of the status of the station. Under 'Initialisation Parameters', the status of systems that are initialised upon powering on the logger can be checked.
	76
	77	This menu also displays the firmware version, battery, external, and solar voltages, and the temperature of the system.
	78
	79	==== Upon setup ====
	80
31.2	81	- Check all Initialisation Parameters are marked as successful.
31.1	82
31.2	83	- Check that solar voltage is above 10 V, otherwise the station will not last long.
31.1	84
31.2	85
31.1	86	== Live Seismometer Data ==
	87
	88	This screen displays real time seismometer data for all 3 axes of the seismometer. Initially, a plot of raw data from all 3 channels is shown. By pressing enter, a high pass filter can be applied showing a more useful plot of all channels. The up and down arrows can be used to change between a view of all channels, individual channels, and all channels on different X axes.
	89
31.2	90	==== Upon setup ====
31.1	91
31.3	92	- Check that all 3 channels are present and are producing a signal.
31.1	93
31.3	94	- Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
31.2	95
	96	- Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
	97
	98
33.1	99	== GPS Data ==
31.3	100
	101	This menu displays the status of the stations' GPS connection. The screen lists; UTC time, UTC date, latitude, longitude, altitude, number of satellite connections, and SNR.
	102
	103	==== Upon setup ====
	104
	105	- Check that the station is connected to satellites
	106
	107
	108	== SD Information ==
	109
	110	The menu lists if the SD card has been initialised, as well as the capacity and space free on the memory card. See "Data card formatting" (above) to see how to format and initialise the inserted SD card.
	111
	112
31.2	113	== System Configuration ==
	114
	115	This menu is used to set the stations identifiers and parameters.
	116
	117	First, the sampling rate can be chosen from a set of options (1 Hz, 10 Hz, 25 Hz, 40 Hz, 50 Hz, 100 Hz, 250 Hz, 1000 Hz).
	118
	119	Next, the station identifier (up to 5 characters) and the network code (2 characters) can be set.
	120
	121	Record start and stop mode should be left to 'On Request' mode.
	122
	123	The seismometer model and serial number (up to 10 characters) can be set. Seismometer model options include:
	124
	125	- Trillium Compact
	126
	127	- CMG - 3ESP
	128
	129	- Guralp 40T
	130
	131	- LE-3D Lite
	132
	133	- Mark L4C
	134
	135	- Mark L4
	136
	137	Additionally, the following settings can be used in place of the seismometer model types: +/- 20V, +/- 10V, +/- 5V
	138
31.3	139	The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume.
31.2	140
	141	==== Upon setup ====
	142
	143	- Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
	144
31.3	145	(% class="box errormessage" %)
31.2	146	(((
	147	NOTE: Ensure the 'RECORD ON RESTART' option is marked with a cross.
	148	)))
	149
34.1	150	(% class="wikigeneratedid" %)
	151	[[image:original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg\|\|height="234" width="289"]]
	152
31.3	153	== STA/LTA Configuration ==
	154
	155	-
	156
	157	= =
	158
27.2	159	= LogFile Conversion Script =
	160
	161	Both the TSAWR and LPR-200 write logging information as a binary "dat" file which includes GPS time syncs, temperatures, battery power, and position. To convert them into ASCII you can read, use [[THIS PYTHON SCRIPT>>http://auspass.edu.au/field/anusr_log.py]].
	162
31.4	163	= =
	164
28.1	165	= Instrument Response =
27.2	166
28.1	167	Both the TerraSAWR and LPR-200 use the same ADS1281 analog-to-digital converter chip and are designed to have identical instrument response. Depending on the output sample rate (e.g. 100 Hz, 250 Hz, 500 Hz, 1000 Hz) amplitude response is consistently flat up to ~~100 Hz but phase response can vary above 1 Hz at 100 Hz (or 10 Hz at 250 Hz).
1.1	168
28.1	169	The user can choose to apply a 2nd stage "sensor gain" by selecting an instrument type in the setup menu. This effectively selects a 10 Vpp (e.g. short period sensors), 20 Vpp, 40 Vpp (most broadband sensors) regime to match the sensor's sensitivity. This has the effect of doubling amplitude from 10v to 20v, or quadrupling from 10v to 40v. If you have set your sensor correctly (and the signal isn't clipped!) you can "correct" this by simply multiplying your data by 0.5 etc.
	170
	171	Another important thing to note is that the group delay associated with late stage FIR filters is automatically applied in the logger, hence there is no need to apply this in the response. These tend to max out at 0.124 seconds for most output sampling rates (0.062 s for 100 Hz).
	172
	173	Instrument response can be downloaded from IRIS-NRL (v2) if need be, or by downloading the response of an equivalent sensor at AusPass (e.g. get_stations(level='response') )
	174
	175
	176	= ANU TerraSAWR (Gen 3, FW 3.5a, 2017?- current) =
	177
27.1	178	Text here
1.1	179
	180	== Sub-paragraph ==
	181
22.1	182	XXXX
1.1	183
	184	== Sub-paragraph ==
	185
12.1	186	xx
1.1	187
	188	=== Sub-sub paragraph ===
	189
12.1	190	x
1.1	191
	192
28.1	193	= ANU LPR-200 (Gen 2, FW 2.6a/2.7a, 2013 - current) =
1.1	194
27.1	195	Text here
1.1	196
	197	== Sub-paragraph ==
	198
12.1	199	x
1.1	200
	201	== Sub-paragraph ==
	202
12.1	203	x
1.1	204
8.1	205
	206	= ANU "ANUSR" (Gen 1, 2003? - 2013?) =
	207
12.1	208	x
8.1	209
1.1	210	= References =
	211
	212	* [[PDF Manual>>http://auspass.edu.au/field/LPR-200_Instruction_Manual.pdf]]
	213	)))
	214
	215	(% class="col-xs-12 col-sm-4" %)
	216	(((
	217	(% class="box" %)
	218	(((
6.1	219	Contents
1.1	220
6.1	221	{{toc/}}
	222	)))
	223
17.1	224
	225	(% class="box" %)
	226	(((
7.1	227	= TerraSAWR Specs =
6.1	228
1.1	229
9.1	230	[[image:Terrasawr 1.jpg]]
	231
	232	[[image:1704865206800-824.jpg]]
	233
	234	[[image:1704864886951-793.jpg]]
	235
11.1	236	\|=Size (L x W x H)\|30 x 25 x12cm
	237	\|=Weight (with battery)\| ~~1.9kg (2.5kg)
14.1	238	\|=Battery\|(((
12.1	239	Lead-acid 12v, ~~7Ah
2.2	240
	241	Rechargeable
1.1	242	)))
16.1	243
	244	[[image:terrasawr battery.jpg]]
2.2	245	)))
1.1	246
17.1	247
1.1	248	(% class="box" %)
	249	(((
7.1	250	= LPR-200 Specs =
3.1	251
19.1	252	[[image:LPR 1.jpg]]
3.1	253
9.1	254	[[image:LPR 2.jpg]]
	255
20.1	256	[[image:LPR 3.jpg]]
9.1	257
11.1	258	\|=Size (L x W x H)\|42 x 34 x17 cm
16.1	259	\|=Weight (with battery)\|4.9 kg (7.3 kg)
14.1	260	\|=Battery\|(((
7.1	261	LiFePo4 140Ah
3.1	262
	263	Rechargeable
	264	)))
16.1	265
	266	[[image:LPR battery.jpg]]
3.1	267	)))
1.1	268	)))
	269	)))

Wiki source code of ANU Seismic Data Loggers

Applications

Navigation

Need help?