Skip to Content

Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/09/16 13:22
From version 66.1
edited by robert
on 2025/09/16 13:19
Change comment: There is no comment for this version
To version 65.1
edited by robert
on 2025/09/16 13:18
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -40,8 +40,7 @@
40 40  
41 41  The loggers can be "pre-programmed" with information (e.g. site name, sampling rate, etc) or they can be programmed in the field using the buttons on the logger. To pre-program the cards you simply edit a text file (named "[[ANUSRSetup.txt>>http://auspass.edu.au/field/ANUSRSetup.txt]]" for the LPRs, or "[[tSAWRSetup.txt>>http://auspass.edu.au/field/tSAWRSetup.txt]]" for the TerraSAWRs) and place it in the root directory on the SDCard. When the logger boots up, it will parse and load this information.
42 42  
43 -(% class="wikigeneratedid" id="HTheformatforANUSRSetup.txt2FLPR200swillbeasinglelineoftextthatlookslikethis:" %)
44 -The format for ANUSRSetup.txt / LPR200s will be a single line of text that looks like this:
43 +=== The format for ANUSRSetup.txt / LPR200s will be a single line of text that looks like this: ===
45 45  
46 46  {{{XXX195G0100010034864 2 }}}
47 47  
... ... @@ -61,8 +61,7 @@
61 61  NOTE: the 2 at the very end is for "RECORD ON RESTART". The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume. (# of blank spaces before this doesn't matter)
62 62  )))
63 63  
64 -(% class="wikigeneratedid" id="HTheformatforTSAWRloggersisshorter:" %)
65 -The format for TSAWR loggers is shorter:
63 +=== The format for TSAWR loggers is shorter: ===
66 66  
67 67  (% class="box errormessage" %)
68 68  (((
... ... @@ -81,8 +81,7 @@
81 81   and seismometer serial number (9999).
82 82  
83 83  
84 -(% class="wikigeneratedid" id="HTheformattingprocessusingthelogger:" %)
85 -The formatting process using the logger:
82 +=== The formatting process using the logger: ===
86 86  
87 87  The process for formatting an SD card within the logger is straightforward. Navigate to the "SD INFORMATION" screen and press ERASE SD CARD. This process may take up to a minute. This will result in erasing all files from the card. Upon starting recording, a new 'seed' will be written containing all the information that the logger has been set with FINISH THIS SECTION
88 88  
... ... @@ -279,7 +279,6 @@
279 279  
280 280  
281 281  
282 -
283 283  (% class="box" %)
284 284  (((
285 285  = TerraSAWR Specs =
... ... @@ -337,6 +337,5 @@
337 337  
338 338  
339 339  
340 -
341 341  
342 342  )))