Skip to Content

Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/08/08 16:09
From version 51.1
edited by robert
on 2025/06/30 19:28
Change comment: There is no comment for this version
To version 52.1
edited by Jack Dent
on 2025/07/22 11:17
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.robert
1 +XWiki.JackD
Content
... ... @@ -23,6 +23,9 @@
23 23  Power issues are easy and cheap to solve relative to the cost of your experiment, don't skimp!
24 24  )))
25 25  
26 +(% class="wikigeneratedid" %)
27 +In the case of an LPR, there is a large compartment for housing an internal battery, able to accommodate anything from a 10-30Ah battery. To use a standard lead acid battery with a positive and negative terminal, a 6 pin adaptor must be used. This ensures the voltage from the external power port (pins
28 +
26 26  = Data Card Formatting and Information =
27 27  
28 28  Both the TerraSAWR and LPR-200 require SD Cards to be formatted in FAT32 filesystem. For 64Gb cards it can be difficult to format in FAT32, but [[software >>http://auspass.edu.au/field/fat32cardformatter.exe]]is available. ANU recommend SanDisk Extreme 150 mb/s cards in either 32 or 64Gb size. We strongly discourage using cards larger than 64Gb, and in general smaller cards are less likely to fail. We have also found that "adapter" cards (e.g. SD to microSD) are prone to having write issues and **strongly** advise against them.
... ... @@ -215,6 +215,7 @@
215 215  
216 216  
217 217  
221 +
218 218  (% class="box" %)
219 219  (((
220 220  = TerraSAWR Specs =