Skip to Content

Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/04/24 14:58
From version 46.1
edited by robert
on 2025/04/24 14:58
Change comment: There is no comment for this version
To version 43.1
edited by robert
on 2025/03/03 18:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -76,17 +76,26 @@
76 76  
77 77  This menu also displays the firmware version, battery, external, and solar voltages, and the temperature of the system.
78 78  
79 -* Check all Initialisation Parameters are marked as successful.
80 -* Check that solar voltage is above 10 V, otherwise the station will not last long.
79 +==== Upon setup ====
81 81  
81 +- Check all Initialisation Parameters are marked as successful.
82 +
83 +- Check that solar voltage is above 10 V, otherwise the station will not last long.
84 +
85 +
82 82  == Live Seismometer Data ==
83 83  
84 84  This screen displays real time seismometer data for all 3 axes of the seismometer. Initially, a plot of raw data from all 3 channels is shown. By pressing enter, a high pass filter can be applied showing a more useful plot of all channels. The up and down arrows can be used to change between a view of all channels, individual channels, and all channels on different X axes.
85 85  
86 -* Check that all 3 channels are present and are producing a signal.
87 -* Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
88 -* Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
90 +==== Upon setup ====
89 89  
92 +- Check that all 3 channels are present and are producing a signal.
93 +
94 +- Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
95 +
96 +- Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
97 +
98 +
90 90  == GPS Data ==
91 91  
92 92  This menu displays the status of the stations' GPS connection. The screen lists; UTC time, UTC date, latitude, longitude, altitude, number of satellite connections, and SNR.
... ... @@ -93,10 +93,12 @@
93 93  
94 94  * Check that the station is connected to satellites
95 95  
105 +
96 96  == SD Information ==
97 97  
98 98  The menu lists if the SD card has been initialised, as well as the capacity and space free on the memory card. See "Data card formatting" (above) to see how to format and initialise the inserted SD card.
99 99  
110 +
100 100  == System Configuration ==
101 101  
102 102  This menu is used to set the stations identifiers and parameters.
... ... @@ -153,6 +153,7 @@
153 153  
154 154  Words to describe the TSAWR would go here, if needed
155 155  
167 + 
156 156  
157 157  
158 158  = ANU LPR-200 (Gen 2, FW 2.6a/2.7a, 2013 - current) =
... ... @@ -180,8 +180,6 @@
180 180  )))
181 181  
182 182  
183 -
184 -
185 185  (% class="box" %)
186 186  (((
187 187  = TerraSAWR Specs =
... ... @@ -194,7 +194,7 @@
194 194  [[image:1704864886951-793.jpg]]
195 195  
196 196  |=Size (L x W x H)|30 x 25 x12cm
197 -|=Weight (with battery)| 1.9kg (2.5kg)
207 +|=Weight (with battery)| ~*~*1.9kg (2.5kg)
198 198  |=Battery|(((
199 199  Lead-acid 12v, ~~7Ah
200 200  
... ... @@ -216,11 +216,11 @@
216 216  [[image:LPR 3.jpg]]
217 217  
218 218  |=Size (L x W x H)|42 x 34 x17 cm
219 -|=Weight (no battery)|5.5 kg
229 +|=Weight (with battery)|4.9 kg (7.3 kg)
220 220  |=Battery|(((
221 -NOW: Any 12v battery with tab connections that will fit (ex. the same TSAWR battery)
231 +LiFePo4 140Ah
222 222  
223 -DISCONTINUED: LiFePo4 140Ah Rechargeable
233 +Rechargeable
224 224  )))
225 225  
226 226  [[image:LPR battery.jpg]]