Changes for page ANU Seismic Data Loggers

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -100,9 +100,11 @@
100	100
101	101	This menu displays the status of the stations' GPS connection. The screen lists; UTC time, UTC date, latitude, longitude, altitude, number of satellite connections, and SNR.
102	102
103		-* Check that the station is connected to satellites
	103	+==== Upon setup ====
104	104
	105	+- Check that the station is connected to satellites
105	105
	107	+
106	106	== SD Information ==
107	107
108	108	The menu lists if the SD card has been initialised, as well as the capacity and space free on the memory card. See "Data card formatting" (above) to see how to format and initialise the inserted SD card.
...	...	@@ -120,19 +120,26 @@
120	120
121	121	The seismometer model and serial number (up to 10 characters) can be set. Seismometer model options include:
122	122
123		-* Trillium Compact (same for 20 and 120)
124		-* CMG - 3ESP
125		-* Guralp 40T
126		-* LE-3D Lite
127		-* Mark L4C
128		-* Mark L4
	125	+- Trillium Compact
129	129
	127	+- CMG - 3ESP
	128	+
	129	+- Guralp 40T
	130	+
	131	+- LE-3D Lite
	132	+
	133	+- Mark L4C
	134	+
	135	+- Mark L4
	136	+
130	130	Additionally, the following settings can be used in place of the seismometer model types: +/- 20V, +/- 10V, +/- 5V
131	131
132	132	The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume.
133	133
134		-* Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
	141	+==== Upon setup ====
135	135
	143	+- Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
	144	+
136	136	(% class="box errormessage" %)
137	137	(((
138	138	NOTE: Ensure the 'RECORD ON RESTART' option is marked with a cross.
...	...	@@ -143,12 +143,14 @@
143	143
144	144	== STA/LTA Configuration ==
145	145
146		-The Short Term Average and Long Term Average Configuration screen.. this is a relic for when people weren't recording continuously. Not advised!
	155	+The Short Term Average and Long Term Average Configuration screen is no longer used.
147	147
	157	+
148	148	= LogFile Conversion Script =
149	149
150	150	Both the TSAWR and LPR-200 write logging information as a binary "dat" file which includes GPS time syncs, temperatures, battery power, and position. To convert them into ASCII you can read, use [[THIS PYTHON SCRIPT>>http://auspass.edu.au/field/anusr_log.py]].
151	151
	162	+
152	152	= Instrument Response =
153	153
154	154	Both the TerraSAWR and LPR-200 use the same ADS1281 analog-to-digital converter chip and are designed to have identical instrument response. Depending on the output sample rate (e.g. 100 Hz, 250 Hz, 500 Hz, 1000 Hz) amplitude response is consistently flat up to ~~100 Hz but phase response can vary above 1 Hz at 100 Hz (or 10 Hz at 250 Hz).
...	...	@@ -162,21 +162,38 @@
162	162
163	163	= ANU TerraSAWR (Gen 3, FW 3.5a, 2017?- current) =
164	164
165		-Words to describe the TSAWR would go here, if needed
	176	+Text here
166	166
167		-
	178	+== Sub-paragraph ==
168	168
	180	+XXXX
169	169
	182	+== Sub-paragraph ==
	183	+
	184	+xx
	185	+
	186	+=== Sub-sub paragraph ===
	187	+
	188	+x
	189	+
	190	+
170	170	= ANU LPR-200 (Gen 2, FW 2.6a/2.7a, 2013 - current) =
171	171
172		-Ditto the mighty LPR!
	193	+Text here
173	173
	195	+== Sub-paragraph ==
174	174
175		-= ANU "ANUSR" (Gen 1, 2003? - 2013?) =
	197	+x
176	176
177		-This logger has been retired for a long time and has a different instrument response.
	199	+== Sub-paragraph ==
178	178
	201	+x
179	179
	203	+
	204	+= ANU "ANUSR" (Gen 1, 2003? - 2013?) =
	205	+
	206	+x
	207	+
180	180	= References =
181	181
182	182	* [[PDF Manual>>http://auspass.edu.au/field/LPR-200_Instruction_Manual.pdf]]