Skip to Content

Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/04/24 14:58
From version 41.1
edited by robert
on 2025/03/03 18:19
Change comment: There is no comment for this version
To version 44.1
edited by robert
on 2025/03/03 18:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,13 +1,20 @@
1 -(% class="box successmessage" %)
1 +(% class="row" %)
2 2  (((
3 +(% class="col-xs-12 col-sm-8" %)
4 +(((
5 +(% class="jumbotron" %)
6 +(((
7 +(% class="container" %)
8 +(((
3 3  ANU has designed and built three generations of seismic data recorders, two of which (the small yellow TerraSAWR and the larger beige LPR-200) are still in use today. Despite their contrasting appearance, they both use the same software, data cards, and have the same instrument response.
4 4  )))
11 +)))
5 5  
6 6  = Data Card Formatting and Information =
7 7  
8 -Both the TerraSAWR and LPR-200 require SD Cards to be formatted in FAT32 filesystem. For 64Gb cards it can be difficult to format in FAT32, but [[software >>url:http://auspass.edu.au/field/fat32cardformatter.exe]]is available. ANU recommend SanDisk Extreme 150 mb/s cards in either 32 or 64Gb size. We strongly discourage using cards larger than 64Gb, and in general smaller cards are less likely to fail. We have also found that "adapter" cards (e.g. SD to microSD) are prone to having write issues and **strongly** advise against them.
15 +Both the TerraSAWR and LPR-200 require SD Cards to be formatted in FAT32 filesystem. For 64Gb cards it can be difficult to format in FAT32, but [[software >>http://auspass.edu.au/field/fat32cardformatter.exe]]is available. ANU recommend SanDisk Extreme 150 mb/s cards in either 32 or 64Gb size. We strongly discourage using cards larger than 64Gb, and in general smaller cards are less likely to fail. We have also found that "adapter" cards (e.g. SD to microSD) are prone to having write issues and **strongly** advise against them.
9 9  
10 -The loggers can be "pre-programmed" with information (e.g. site name, sampling rate, etc) or they can be programmed in the field using the buttons on the logger. To pre-program the cards you simply edit a text file (named "[[ANUSRSetup.txt>>url:http://auspass.edu.au/field/ANUSRSetup.txt]]" for the LPRs, or "[[tSAWRSetup.txt>>url:http://auspass.edu.au/field/tSAWRSetup.txt]]" for the TerraSAWRs) and place it in the root directory on the SDCard. When the logger boots up, it will parse and load this information.
17 +The loggers can be "pre-programmed" with information (e.g. site name, sampling rate, etc) or they can be programmed in the field using the buttons on the logger. To pre-program the cards you simply edit a text file (named "[[ANUSRSetup.txt>>http://auspass.edu.au/field/ANUSRSetup.txt]]" for the LPRs, or "[[tSAWRSetup.txt>>http://auspass.edu.au/field/tSAWRSetup.txt]]" for the TerraSAWRs) and place it in the root directory on the SDCard. When the logger boots up, it will parse and load this information.
11 11  
12 12  === The format for ANUSRSetup.txt / LPR200s will be a single line of text that looks like this: ===
13 13  
... ... @@ -50,7 +50,7 @@
50 50  
51 51  The process for formatting an SD card within the logger is straightforward. Navigate to the "SD INFORMATION" screen and press ERASE SD CARD. This process may take up to a minute. This will result in erasing all files from the card. Upon starting recording, a new 'seed' will be written containing all the information that the logger has been set with FINISH THIS SECTION
52 52  
53 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg?width=298&height=240&rev=1.1||alt="original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg" height="240" width="298"]]
60 +[[image:original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg||height="240" width="298"]]
54 54  
55 55  Here is a general guideline for how much data you can expect to fit on a card:
56 56  
... ... @@ -69,40 +69,27 @@
69 69  
70 70  This menu also displays the firmware version, battery, external, and solar voltages, and the temperature of the system.
71 71  
72 -==== Upon setup ====
79 +* Check all Initialisation Parameters are marked as successful.
80 +* Check that solar voltage is above 10 V, otherwise the station will not last long.
73 73  
74 -- Check all Initialisation Parameters are marked as successful.
75 -
76 -- Check that solar voltage is above 10 V, otherwise the station will not last long.
77 -
78 -
79 79  == Live Seismometer Data ==
80 80  
81 81  This screen displays real time seismometer data for all 3 axes of the seismometer. Initially, a plot of raw data from all 3 channels is shown. By pressing enter, a high pass filter can be applied showing a more useful plot of all channels. The up and down arrows can be used to change between a view of all channels, individual channels, and all channels on different X axes.
82 82  
83 -==== Upon setup ====
86 +* Check that all 3 channels are present and are producing a signal.
87 +* Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
88 +* Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
84 84  
85 -- Check that all 3 channels are present and are producing a signal.
86 -
87 -- Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
88 -
89 -- Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
90 -
91 -
92 92  == GPS Data ==
93 93  
94 94  This menu displays the status of the stations' GPS connection. The screen lists; UTC time, UTC date, latitude, longitude, altitude, number of satellite connections, and SNR.
95 95  
96 -==== Upon setup ====
94 +* Check that the station is connected to satellites
97 97  
98 -- Check that the station is connected to satellites
99 -
100 -
101 101  == SD Information ==
102 102  
103 103  The menu lists if the SD card has been initialised, as well as the capacity and space free on the memory card. See "Data card formatting" (above) to see how to format and initialise the inserted SD card.
104 104  
105 -
106 106  == System Configuration ==
107 107  
108 108  This menu is used to set the stations identifiers and parameters.
... ... @@ -115,26 +115,19 @@
115 115  
116 116  The seismometer model and serial number (up to 10 characters) can be set. Seismometer model options include:
117 117  
118 -- Trillium Compact
112 +* Trillium Compact (same for 20 and 120)
113 +* CMG - 3ESP
114 +* Guralp 40T
115 +* LE-3D Lite
116 +* Mark L4C
117 +* Mark L4
119 119  
120 -- CMG - 3ESP
121 -
122 -- Guralp 40T
123 -
124 -- LE-3D Lite
125 -
126 -- Mark L4C
127 -
128 -- Mark L4
129 -
130 130  Additionally, the following settings can be used in place of the seismometer model types: +/- 20V, +/- 10V, +/- 5V
131 131  
132 132  The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume.
133 133  
134 -==== Upon setup ====
123 +* Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
135 135  
136 -- Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
137 -
138 138  (% class="box errormessage" %)
139 139  (((
140 140  NOTE: Ensure the 'RECORD ON RESTART' option is marked with a cross.
... ... @@ -141,18 +141,16 @@
141 141  )))
142 142  
143 143  (% class="wikigeneratedid" %)
144 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg?width=289&height=234&rev=1.1||alt="original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg" height="234" width="289"]]
131 +[[image:original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg||height="234" width="289"]]
145 145  
146 146  == STA/LTA Configuration ==
147 147  
148 -The Short Term Average and Long Term Average Configuration screen is no longer used.
135 +The Short Term Average and Long Term Average Configuration screen.. this is a relic for when people weren't recording continuously. Not advised!
149 149  
150 -
151 151  = LogFile Conversion Script =
152 152  
153 -Both the TSAWR and LPR-200 write logging information as a binary "dat" file which includes GPS time syncs, temperatures, battery power, and position. To convert them into ASCII you can read, use [[THIS PYTHON SCRIPT>>url:http://auspass.edu.au/field/anusr_log.py]].
139 +Both the TSAWR and LPR-200 write logging information as a binary "dat" file which includes GPS time syncs, temperatures, battery power, and position. To convert them into ASCII you can read, use [[THIS PYTHON SCRIPT>>http://auspass.edu.au/field/anusr_log.py]].
154 154  
155 -
156 156  = Instrument Response =
157 157  
158 158  Both the TerraSAWR and LPR-200 use the same ADS1281 analog-to-digital converter chip and are designed to have identical instrument response. Depending on the output sample rate (e.g. 100 Hz, 250 Hz, 500 Hz, 1000 Hz) amplitude response is consistently flat up to ~~100 Hz but phase response can vary above 1 Hz at 100 Hz (or 10 Hz at 250 Hz).
... ... @@ -166,37 +166,24 @@
166 166  
167 167  = ANU TerraSAWR (Gen 3, FW 3.5a, 2017?- current) =
168 168  
169 -Text here
154 +Words to describe the TSAWR would go here, if needed
170 170  
171 -== Sub-paragraph ==
172 172  
173 -XXXX
174 174  
175 -== Sub-paragraph ==
176 -
177 -xx
178 -
179 -
180 -
181 -
182 182  = ANU LPR-200 (Gen 2, FW 2.6a/2.7a, 2013 - current) =
183 183  
184 -Text here
160 +Ditto the mighty LPR!
185 185  
186 -== Sub-paragraph ==
187 187  
188 -x
189 -
190 -
191 -
192 192  = ANU "ANUSR" (Gen 1, 2003? - 2013?) =
193 193  
194 -x
165 +This logger has been retired for a long time and has a different instrument response.
195 195  
167 +
196 196  = References =
197 197  
198 -* [[PDF Manual>>url:http://auspass.edu.au/field/LPR-200_Instruction_Manual.pdf]]
199 -~)~)~)
170 +* [[PDF Manual>>http://auspass.edu.au/field/LPR-200_Instruction_Manual.pdf]]
171 +)))
200 200  
201 201  (% class="col-xs-12 col-sm-4" %)
202 202  (((
... ... @@ -204,38 +204,7 @@
204 204  (((
205 205  **Contents**
206 206  
207 -(% class="wikitoc" %)
208 -* [[Data Card Formatting and Information>>path:#HDataCardFormattingandInformation]]
209 -**
210 -*** [[The format for ANUSRSetup.txt / LPR200s will be a single line of text that looks like this:>>path:#HTheformatforANUSRSetup.txt2FLPR200swillbeasinglelineoftextthatlookslikethis:]]
211 -*** [[The format for TSAWR loggers is shorter:>>path:#HTheformatforTSAWRloggersisshorter:]]
212 -*** [[The formatting process using the logger:>>path:#HTheformattingprocessusingthelogger:]]
213 -* [[Logger Menus Overview (and setup)>>path:#HLoggerMenusOverview28andsetup29]]
214 -** [[System Information>>path:#HSystemInformation]]
215 -***
216 -**** [[Upon setup>>path:#HUponsetup]]
217 -** [[Live Seismometer Data>>path:#HLiveSeismometerData]]
218 -***
219 -**** [[Upon setup>>path:#HUponsetup-1]]
220 -** [[GPS Data>>path:#HGPSData]]
221 -***
222 -**** [[Upon setup>>path:#HUponsetup-2]]
223 -** [[SD Information>>path:#HSDInformation]]
224 -** [[System Configuration>>path:#HSystemConfiguration]]
225 -***
226 -**** [[Upon setup>>path:#HUponsetup-3]]
227 -** [[STA/LTA Configuration>>path:#HSTA2FLTAConfiguration]]
228 -* [[LogFile Conversion Script>>path:#HLogFileConversionScript]]
229 -* [[Instrument Response>>path:#HInstrumentResponse]]
230 -* [[ANU TerraSAWR (Gen 3, FW 3.5a, 2017?- current)>>path:#HANUTerraSAWR28Gen32CFW3.5a2C20173F-current29]]
231 -** [[Sub-paragraph>>path:#HSub-paragraph]]
232 -** [[Sub-paragraph>>path:#HSub-paragraph-1]]
233 -* [[ANU LPR-200 (Gen 2, FW 2.6a/2.7a, 2013 - current)>>path:#HANULPR-20028Gen22CFW2.6a2F2.7a2C2013-current29]]
234 -** [[Sub-paragraph>>path:#HSub-paragraph-2]]
235 -* [[ANU "ANUSR" (Gen 1, 2003? - 2013?)>>path:#HANU22ANUSR2228Gen12C20033F-20133F29]]
236 -* [[References>>path:#HReferences]]
237 -* [[TerraSAWR Specs>>path:#HTerraSAWRSpecs]]
238 -* [[LPR-200 Specs>>path:#HLPR-200Specs]]
179 +{{toc/}}
239 239  )))
240 240  
241 241  
... ... @@ -244,11 +244,11 @@
244 244  = TerraSAWR Specs =
245 245  
246 246  
247 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/Terrasawr%201.jpg?rev=1.1||alt="Terrasawr 1.jpg"]]
188 +[[image:Terrasawr 1.jpg]]
248 248  
249 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/1704865206800-824.jpg?rev=1.1||alt="1704865206800-824.jpg"]]
190 +[[image:1704865206800-824.jpg]]
250 250  
251 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/1704864886951-793.jpg?rev=1.1||alt="1704864886951-793.jpg"]]
192 +[[image:1704864886951-793.jpg]]
252 252  
253 253  |=Size (L x W x H)|30 x 25 x12cm
254 254  |=Weight (with battery)| ~*~*1.9kg (2.5kg)
... ... @@ -258,7 +258,7 @@
258 258  Rechargeable
259 259  )))
260 260  
261 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/terrasawr%20battery.jpg?rev=1.1||alt="terrasawr battery.jpg"]]
202 +[[image:terrasawr battery.jpg]]
262 262  )))
263 263  
264 264  
... ... @@ -266,11 +266,11 @@
266 266  (((
267 267  = LPR-200 Specs =
268 268  
269 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/LPR%201.jpg?rev=1.3||alt="LPR 1.jpg"]]
210 +[[image:LPR 1.jpg]]
270 270  
271 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/LPR%202.jpg?rev=1.3||alt="LPR 2.jpg"]]
212 +[[image:LPR 2.jpg]]
272 272  
273 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/LPR%203.jpg?rev=1.8||alt="LPR 3.jpg"]]
214 +[[image:LPR 3.jpg]]
274 274  
275 275  |=Size (L x W x H)|42 x 34 x17 cm
276 276  |=Weight (with battery)|4.9 kg (7.3 kg)
... ... @@ -280,8 +280,7 @@
280 280  Rechargeable
281 281  )))
282 282  
283 -[[image:/xwiki/bin/download/Instrumentation/ANU%20LPR-200/WebHome/LPR%20battery.jpg?rev=1.1||alt="LPR battery.jpg"]]
224 +[[image:LPR battery.jpg]]
284 284  )))
285 285  )))
286 -
287 -~)~)~)
227 +)))