Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/06/27 16:42

From 31.2 to 31.3 From 46.1 to 46.2

From version 31.3

edited by Jack Dent
on 2024/12/19 13:01

Change comment: There is no comment for this version

To version 46.1

edited by robert
on 2025/04/24 14:58

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 2 added, 0 removed)
- original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg
- original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.JackD
++XWiki.robert

Content

@@ -34,7 +34,7 @@
  NOTE: the 2 at the very end is for "RECORD ON RESTART". The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume. (# of blank spaces before this doesn't matter)
  )))
--=== The format for TSAWR loggers is shorter ===
++=== The format for TSAWR loggers is shorter: ===
  (% class="box errormessage" %)
  (((
@@ -43,7 +43,7 @@
  SITE15G02500039999      2
--corresponding to site SITE1,
++corresponding to site SITE1,
                   network 5G
                   sample rate 0250, (i.e. 250 Hz)
@@ -57,6 +57,7 @@
  The process for formatting an SD card within the logger is straightforward. Navigate to the "SD INFORMATION" screen and press ERASE SD CARD. This process may take up to a minute. This will result in erasing all files from the card. Upon starting recording, a new 'seed' will be written containing all the information that the logger has been set with FINISH THIS SECTION
++[[image:original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg||height="240" width="298"]]
  Here is a general guideline for how much data you can expect to fit on a card:
@@ -67,6 +67,8 @@
  = Logger Menus Overview (and setup) =
++The same menus are used in both the TSAWR and LPR-200 loggers.
++
  == System Information ==
  This menu provides an overview of the status of the station. Under 'Initialisation Parameters', the status of systems that are initialised upon powering on the logger can be checked.
@@ -73,40 +73,27 @@
  This menu also displays the firmware version, battery, external, and solar voltages, and the temperature of the system.
--==== Upon setup ====
++* Check all Initialisation Parameters are marked as successful.
++* Check that solar voltage is above 10 V, otherwise the station will not last long.
--- Check all Initialisation Parameters are marked as successful.
--
--- Check that solar voltage is above 10 V, otherwise the station will not last long.
--
--
  == Live Seismometer Data ==
  This screen displays real time seismometer data for all 3 axes of the seismometer. Initially, a plot of raw data from all 3 channels is shown. By pressing enter, a high pass filter can be applied showing a more useful plot of all channels. The up and down arrows can be used to change between a view of all channels, individual channels, and all channels on different X axes.
--==== Upon setup ====
++* Check that all 3 channels are present and are producing a signal.
++* Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
++* Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
--- Check that all 3 channels are present and are producing a signal.
++== GPS Data ==
--- Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
--
--- Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
--
--
--== GPS ==
--
  This menu displays the status of the stations' GPS connection. The screen lists; UTC time, UTC date, latitude, longitude, altitude, number of satellite connections, and SNR.
--==== Upon setup ====
++* Check that the station is connected to satellites
--- Check that the station is connected to satellites
--
--
  == SD Information ==
  The menu lists if the SD card has been initialised, as well as the capacity and space free on the memory card. See "Data card formatting" (above) to see how to format and initialise the inserted SD card.
--
  == System Configuration ==
  This menu is used to set the stations identifiers and parameters.
@@ -119,37 +119,31 @@
  The seismometer model and serial number (up to 10 characters) can be set. Seismometer model options include:
--- Trillium Compact
++* Trillium Compact (same for 20 and 120)
++* CMG - 3ESP
++* Guralp 40T
++* LE-3D Lite
++* Mark L4C
++* Mark L4
--- CMG - 3ESP
--
--- Guralp 40T
--
--- LE-3D Lite
--
--- Mark L4C
--
--- Mark L4
--
  Additionally, the following settings can be used in place of the seismometer model types: +/- 20V, +/- 10V, +/- 5V
  The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume.
--==== Upon setup ====
++* Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
--- Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
--
  (% class="box errormessage" %)
  (((
  NOTE: Ensure the 'RECORD ON RESTART' option is marked with a cross.
  )))
++(% class="wikigeneratedid" %)
++[[image:original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg||height="234" width="289"]]
++
  == STA/LTA Configuration ==
---
++The Short Term Average and Long Term Average Configuration screen.. this is a relic for when people weren't recording continuously. Not advised!
--=   =
--
  = LogFile Conversion Script =
  Both the TSAWR and LPR-200 write logging information as a binary "dat" file which includes GPS time syncs, temperatures, battery power, and position. To convert them into ASCII you can read, use [[THIS PYTHON SCRIPT>>http://auspass.edu.au/field/anusr_log.py]].
@@ -167,38 +167,20 @@
  = ANU TerraSAWR (Gen 3, FW 3.5a, 2017?- current) =
--Text here
++Words to describe the TSAWR would go here, if needed
--== Sub-paragraph ==
--XXXX
--== Sub-paragraph ==
--
--xx
--
--=== Sub-sub paragraph ===
--
--x
--
--
  = ANU LPR-200 (Gen 2, FW 2.6a/2.7a, 2013 - current) =
--Text here
++Ditto the mighty LPR!
--== Sub-paragraph ==
--x
--
--== Sub-paragraph ==
--
--x
--
--
  = ANU "ANUSR" (Gen 1, 2003? - 2013?) =
--x
++This logger has been retired for a long time and has a different instrument response.
++
  = References =
  * [[PDF Manual>>http://auspass.edu.au/field/LPR-200_Instruction_Manual.pdf]]
@@ -214,6 +214,8 @@
  )))
++
++
  (% class="box" %)
  (((
  = TerraSAWR Specs =
@@ -226,7 +226,7 @@
  [[image:1704864886951-793.jpg]]
  |=Size (L x W x H)|30 x 25 x12cm
--|=Weight (with battery)| ~*~*1.9kg (2.5kg)
++|=Weight (with battery)| 1.9kg (2.5kg)
  |=Battery|(((
  Lead-acid 12v, ~~7Ah
@@ -248,11 +248,11 @@
  [[image:LPR 3.jpg]]
  |=Size (L x W x H)|42 x 34 x17 cm
--|=Weight (with battery)|4.9 kg (7.3 kg)
++|=Weight (no battery)|5.5 kg
  |=Battery|(((
--LiFePo4 140Ah
++NOW: Any 12v battery with tab connections that will fit (ex. the same TSAWR battery)
--Rechargeable
++DISCONTINUED: LiFePo4 140Ah Rechargeable
  )))
  [[image:LPR battery.jpg]]
@@ -259,5 +259,3 @@
  )))
  )))
  )))
--
--

original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.JackD

Size

...	...	@@ -1,0 +1,1 @@
	1	+858.4 KB

Content

original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.JackD

Size

...	...	@@ -1,0 +1,1 @@
	1	+890.3 KB

Content

Changes for page ANU Seismic Data Loggers

Summary

Details

Applications

Navigation

Need help?