Changes for page ANU Seismic Data Loggers
Last modified by robert on 2025/06/27 16:42
Summary
-
Page properties (2 modified, 0 added, 0 removed)
-
Attachments (0 modified, 2 added, 0 removed)
Details
- Page properties
-
- Author
-
... ... @@ -1,1 +1,1 @@ 1 -XWiki. JackD1 +XWiki.robert - Content
-
... ... @@ -34,7 +34,7 @@ 34 34 NOTE: the 2 at the very end is for "RECORD ON RESTART". The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume. (# of blank spaces before this doesn't matter) 35 35 ))) 36 36 37 -=== The format for TSAWR loggers is shorter === 37 +=== The format for TSAWR loggers is shorter: === 38 38 39 39 (% class="box errormessage" %) 40 40 ((( ... ... @@ -43,7 +43,7 @@ 43 43 44 44 SITE15G02500039999 2 45 45 46 -corresponding to site SITE1, 46 +corresponding to site SITE1, 47 47 48 48 network 5G 49 49 sample rate 0250, (i.e. 250 Hz) ... ... @@ -57,6 +57,7 @@ 57 57 58 58 The process for formatting an SD card within the logger is straightforward. Navigate to the "SD INFORMATION" screen and press ERASE SD CARD. This process may take up to a minute. This will result in erasing all files from the card. Upon starting recording, a new 'seed' will be written containing all the information that the logger has been set with FINISH THIS SECTION 59 59 60 +[[image:original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg||height="240" width="298"]] 60 60 61 61 Here is a general guideline for how much data you can expect to fit on a card: 62 62 ... ... @@ -67,6 +67,8 @@ 67 67 68 68 = Logger Menus Overview (and setup) = 69 69 71 +The same menus are used in both the TSAWR and LPR-200 loggers. 72 + 70 70 == System Information == 71 71 72 72 This menu provides an overview of the status of the station. Under 'Initialisation Parameters', the status of systems that are initialised upon powering on the logger can be checked. ... ... @@ -93,15 +93,13 @@ 93 93 - Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots. 94 94 95 95 96 -== GPS == 99 +== GPS Data == 97 97 98 98 This menu displays the status of the stations' GPS connection. The screen lists; UTC time, UTC date, latitude, longitude, altitude, number of satellite connections, and SNR. 99 99 100 - ====Upon setup====103 +* Check that the station is connected to satellites 101 101 102 -- Check that the station is connected to satellites 103 103 104 - 105 105 == SD Information == 106 106 107 107 The menu lists if the SD card has been initialised, as well as the capacity and space free on the memory card. See "Data card formatting" (above) to see how to format and initialise the inserted SD card. ... ... @@ -119,37 +119,31 @@ 119 119 120 120 The seismometer model and serial number (up to 10 characters) can be set. Seismometer model options include: 121 121 122 -- Trillium Compact 123 +* Trillium Compact (same for 20 and 120) 124 +* CMG - 3ESP 125 +* Guralp 40T 126 +* LE-3D Lite 127 +* Mark L4C 128 +* Mark L4 123 123 124 -- CMG - 3ESP 125 - 126 -- Guralp 40T 127 - 128 -- LE-3D Lite 129 - 130 -- Mark L4C 131 - 132 -- Mark L4 133 - 134 134 Additionally, the following settings can be used in place of the seismometer model types: +/- 20V, +/- 10V, +/- 5V 135 135 136 136 The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume. 137 137 138 - ====Upon setup====134 +* Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked. 139 139 140 -- Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked. 141 - 142 142 (% class="box errormessage" %) 143 143 ((( 144 144 NOTE: Ensure the 'RECORD ON RESTART' option is marked with a cross. 145 145 ))) 146 146 141 +(% class="wikigeneratedid" %) 142 +[[image:original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg||height="234" width="289"]] 143 + 147 147 == STA/LTA Configuration == 148 148 149 - -146 +The Short Term Average and Long Term Average Configuration screen.. this is a relic for when people weren't recording continuously. Not advised! 150 150 151 -= = 152 - 153 153 = LogFile Conversion Script = 154 154 155 155 Both the TSAWR and LPR-200 write logging information as a binary "dat" file which includes GPS time syncs, temperatures, battery power, and position. To convert them into ASCII you can read, use [[THIS PYTHON SCRIPT>>http://auspass.edu.au/field/anusr_log.py]]. ... ... @@ -167,38 +167,21 @@ 167 167 168 168 = ANU TerraSAWR (Gen 3, FW 3.5a, 2017?- current) = 169 169 170 - Text here165 +Words to describe the TSAWR would go here, if needed 171 171 172 - == Sub-paragraph ==167 + 173 173 174 -XXXX 175 175 176 -== Sub-paragraph == 177 - 178 -xx 179 - 180 -=== Sub-sub paragraph === 181 - 182 -x 183 - 184 - 185 185 = ANU LPR-200 (Gen 2, FW 2.6a/2.7a, 2013 - current) = 186 186 187 - Text here172 +Ditto the mighty LPR! 188 188 189 -== Sub-paragraph == 190 190 191 -x 192 - 193 -== Sub-paragraph == 194 - 195 -x 196 - 197 - 198 198 = ANU "ANUSR" (Gen 1, 2003? - 2013?) = 199 199 200 - x177 +This logger has been retired for a long time and has a different instrument response. 201 201 179 + 202 202 = References = 203 203 204 204 * [[PDF Manual>>http://auspass.edu.au/field/LPR-200_Instruction_Manual.pdf]] ... ... @@ -259,5 +259,3 @@ 259 259 ))) 260 260 ))) 261 261 ))) 262 - 263 -
- original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.JackD - Size
-
... ... @@ -1,0 +1,1 @@ 1 +858.4 KB - Content
- original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.JackD - Size
-
... ... @@ -1,0 +1,1 @@ 1 +890.3 KB - Content