Skip to Content

Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/04/24 14:58
From version 31.2
edited by Jack Dent
on 2024/12/19 12:12
Change comment: There is no comment for this version
To version 36.1
edited by Jack Dent
on 2025/01/06 08:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -31,10 +31,10 @@
31 31  
32 32  (% class="box warningmessage" %)
33 33  (((
34 -NOTE: the 2 at the very end is for "start recording on power" and is vital to have this set so the logger will resume recording on its own if it experiences a power cycle. (# of blank spaces before this doesn't matter)
34 +NOTE: the 2 at the very end is for "RECORD ON RESTART". The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume. (# of blank spaces before this doesn't matter)
35 35  )))
36 36  
37 -=== The format for TSAWR loggers is shorter ===
37 +=== The format for TSAWR loggers is shorter: ===
38 38  
39 39  (% class="box errormessage" %)
40 40  (((
... ... @@ -43,7 +43,7 @@
43 43  
44 44  SITE15G02500039999 2
45 45  
46 -corresponding to site SITE1,
46 +corresponding to site SITE1, 
47 47  
48 48   network 5G
49 49   sample rate 0250, (i.e. 250 Hz)
... ... @@ -57,6 +57,7 @@
57 57  
58 58  The process for formatting an SD card within the logger is straightforward. Navigate to the "SD INFORMATION" screen and press ERASE SD CARD. This process may take up to a minute. This will result in erasing all files from the card. Upon starting recording, a new 'seed' will be written containing all the information that the logger has been set with FINISH THIS SECTION
59 59  
60 +[[image:original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg||height="240" width="298"]]
60 60  
61 61  Here is a general guideline for how much data you can expect to fit on a card:
62 62  
... ... @@ -67,6 +67,8 @@
67 67  
68 68  = Logger Menus Overview (and setup) =
69 69  
71 +The same menus are used in both the TSAWR and LPR-200 loggers.
72 +
70 70  == System Information ==
71 71  
72 72  This menu provides an overview of the status of the station. Under 'Initialisation Parameters', the status of systems that are initialised upon powering on the logger can be checked.
... ... @@ -86,13 +86,27 @@
86 86  
87 87  ==== Upon setup ====
88 88  
89 -- Check that all channels are present and are producing a signal.
92 +- Check that all 3 channels are present and are producing a signal.
90 90  
91 -- Stomp on the ground near where the sensor is installed to check that a signal is being picked up.
94 +- Stomp on the ground near where the sensor is installed to check that a signal is being picked up by all 3 channels.
92 92  
93 93  - Common representations of poor signals include channels sloping smoothly from high values to zero, or sharp corners in the plots.
94 94  
95 95  
99 +== GPS Data ==
100 +
101 +This menu displays the status of the stations' GPS connection. The screen lists; UTC time, UTC date, latitude, longitude, altitude, number of satellite connections, and SNR.
102 +
103 +==== Upon setup ====
104 +
105 +- Check that the station is connected to satellites
106 +
107 +
108 +== SD Information ==
109 +
110 +The menu lists if the SD card has been initialised, as well as the capacity and space free on the memory card. See "Data card formatting" (above) to see how to format and initialise the inserted SD card.
111 +
112 +
96 96  == System Configuration ==
97 97  
98 98  This menu is used to set the stations identifiers and parameters.
... ... @@ -119,21 +119,30 @@
119 119  
120 120  Additionally, the following settings can be used in place of the seismometer model types: +/- 20V, +/- 10V, +/- 5V
121 121  
122 -The record on restart option ensures that if the logger dies and is powered back up in the field (due to battery charging cycles or other causes) that the recording will resume.
139 +The record on restart option ensures that if the logger dies and is powered back up whilst in the field (due to battery charging cycles or other causes) that the recording will resume.
123 123  
124 124  ==== Upon setup ====
125 125  
126 126  - Set the sampling rate, station identifier, and network code. Set the appropriate seismometer type. Most importantly, ensure the record on restart setting is checked.
127 127  
128 -(% class="box warningmessage" %)
145 +(% class="box errormessage" %)
129 129  (((
130 130  NOTE: Ensure the 'RECORD ON RESTART' option is marked with a cross.
131 131  )))
132 132  
150 +(% class="wikigeneratedid" %)
151 +[[image:original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg||height="234" width="289"]]
152 +
153 +== STA/LTA Configuration ==
154 +
155 +The Short Term Average and Long Term Average Configuration screen is no longer used.
156 +
157 +
133 133  = LogFile Conversion Script =
134 134  
135 135  Both the TSAWR and LPR-200 write logging information as a binary "dat" file which includes GPS time syncs, temperatures, battery power, and position. To convert them into ASCII you can read, use [[THIS PYTHON SCRIPT>>http://auspass.edu.au/field/anusr_log.py]].
136 136  
162 +
137 137  = Instrument Response =
138 138  
139 139  Both the TerraSAWR and LPR-200 use the same ADS1281 analog-to-digital converter chip and are designed to have identical instrument response. Depending on the output sample rate (e.g. 100 Hz, 250 Hz, 500 Hz, 1000 Hz) amplitude response is consistently flat up to ~~100 Hz but phase response can vary above 1 Hz at 100 Hz (or 10 Hz at 250 Hz).
... ... @@ -239,5 +239,3 @@
239 239  )))
240 240  )))
241 241  )))
242 -
243 -
original_0747763c-e3dd-4667-b897-833f12c8e0b8_20241219_130604.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +858.4 KB
Content
original_2b83fcf5-ee5a-4375-bab1-2d738e4ffe8c_20241219_130646.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.JackD
Size
... ... @@ -1,0 +1,1 @@
1 +890.3 KB
Content