Skip to Content

Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/04/24 14:58
From version 30.1
edited by Jack Dent
on 2024/12/19 10:42
Change comment: There is no comment for this version
To version 29.1
edited by Jack Dent
on 2024/12/19 10:05
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -34,7 +34,7 @@
34 34  NOTE: the 2 at the very end is for "start recording on power" and is vital to have this set so the logger will resume recording on its own if it experiences a power cycle. (# of blank spaces before this doesn't matter)
35 35  )))
36 36  
37 -=== The format for TSAWR loggers are a bit shorter as they don't have an option to set the "gps sync" ===
37 +=== The format for TSAWR loggers are a bit shorter as they don't have an option to set the "gps sync" ===
38 38  
39 39  SITE1XX02500039999 2
40 40  
... ... @@ -48,7 +48,7 @@
48 48  
49 49  === The formatting process using the logger: ===
50 50  
51 -The process for formatting an SD card within the logger is straightforward. Navigate to the "SD INFORMATION" screen and press ERASE SD CARD. This process may take up to a minute. This will result in erasing all files from the card. Upon starting recording, a new 'seed' will be written containing all the information that the logger has been set with FINISH THIS SECTION
51 +The process for formatting an SD card within the logger is straightforward. Navigate to the
52 52  
53 53  
54 54  Here is a general guideline for how much data you can expect to fit on a card: