Skip to Content

Changes for page AusPass Data

Last modified by robert on 2025/12/16 21:57
From version 15.2
edited by robert
on 2025/12/16 21:57
Change comment: There is no comment for this version
To version 14.1
edited by robert
on 2025/12/04 17:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,7 +23,7 @@
23 23  
24 24  (% class="box warningmessage" %)
25 25  (((
26 -Unfortunately, AusPass no longer hosts AU network data~-~- you will now have to get this from Earthscope/IRIS.
26 +NOTE AusPass no longer hosts AU network metadata~-~- you will have to get this from Earthscope/IRIS.
27 27  )))
28 28  
29 29  == QA/QC ==
... ... @@ -50,7 +50,7 @@
50 50  
51 51  In[[ late 2023 it was discovered>>https://epic.earthscope.org/content/smartsolo-archives-flipped-polarity-igu-16hr-3c-5hz]] that the vertical Z channel of **the IGU-16HR short period **SmartSolo nodes is actually inverted relative to the standard expectation of "positive up" (vertical axis dip = -90). EarthScope's solution was to add a -1 multiplier to the //response data.// Because we have a much smaller volume of this data to fix, and far less of it already distributed prior to this announcement, we have opted to do the opposite; e.g. we invert the //raw data// because the data is what is wrong; not the response.
52 52  
53 -**In late 2025 we also discovered that the horizontal (N and E) channels are ALSO flipped! Data downloaded before Friday 5 December 2025 is affected- multiply your DH[NE] channels by -1 if you have already downloaded them.**
53 +**In late 2025 we also discovered that the horizontal (N and E) channels are ALSO flipped! Data downloaded before Friday 5 December 2025 is affected!**
54 54  
55 55  Until very recently we also thought that the BD3C-5 "broadband" nodes had inverted data by default, but now understand that their raw exported data has the correct polarity.
56 56